3D model (JSmol)
CompTox Dashboard (EPA)
|Molar mass||23.998 g/mol|
|Appearance||white or grey solid|
|Melting point||638 °C (1,180 °F; 911 K)(decomposes)|
|Reacts with water|
|Solubility||insoluble in ammonia, benzene, CCl4, CS2|
Refractive index (nD)
|fcc (NaCl), cF8|
|Fm3m, No. 225|
a = 498 pm
Formula units (Z)
Heat capacity (C)
|36.4 J/mol K|
Std enthalpy of
Gibbs free energy (ΔfG?)
|Main hazards||highly corrosive, pyrophoric in air, reacts violently with water|
|Safety data sheet||External MSDS|
|GHS Signal word||Danger|
|NFPA 704 (fire diamond)|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Sodium hydride is the chemical compound with the empirical formula NaH. This alkali metal hydride is primarily used as a strong yet combustible base in organic synthesis. NaH is a saline (salt-like) hydride, composed of Na+ and H- ions, in contrast to molecular hydrides such as borane, methane, ammonia, and water. It is an ionic material that is insoluble in organic solvents (although soluble in molten Na), consistent with the fact that H- ions do not exist in solution. Because of the insolubility of NaH, all reactions involving NaH occur at the surface of the solid.
NaH is produced by the direct reaction of hydrogen and liquid sodium. Pure NaH is colorless, although samples generally appear grey. NaH is ca. 40% denser than Na (0.968 g/cm3).
NaH, like LiH, KH, RbH, and CsH, adopts the NaCl crystal structure. In this motif, each Na+ ion is surrounded by six H- centers in an octahedral geometry. The ionic radii of H- (146 pm in NaH) and F- (133 pm) are comparable, as judged by the Na-H and Na-F distances.
A very unusual situation occurs in a compound dubbed "inverse sodium hydride", which contains H+ and Na- ions. Na- is an alkalide, and this compound differs from ordinary sodium hydride in having a much higher energy content due to the net displacement of two electrons from hydrogen to sodium. A derivative of this "inverse sodium hydride" arises in the presence of the base adamanzane. This molecule irreversibly encapsulates the H+ and shields it from interaction with the alkalide Na-. Theoretical work has suggested that even an unprotected protonated tertiary amine complexed with the sodium alkalide might be metastable under certain solvent conditions, though the barrier to reaction would be small and finding a suitable solvent might be difficult.
NaH is a base of wide scope and utility in organic chemistry. As a superbase, it is capable of deprotonating a range of even weak Brønsted acids to give the corresponding sodium derivatives. Typical "easy" substrates contain O-H, N-H, S-H bonds, including alcohols, phenols, pyrazoles, and thiols.
NaH notably deprotonates carbon acids (i.e., C-H bonds) such as 1,3-dicarbonyls such as malonic esters. The resulting sodium derivatives can be alkylated. NaH is widely used to promote condensation reactions of carbonyl compounds via the Dieckmann condensation, Stobbe condensation, Darzens condensation, and Claisen condensation. Other carbon acids susceptible to deprotonation by NaH include sulfonium salts and DMSO. NaH is used to make sulfur ylides, which in turn are used to convert ketones into epoxides, as in the Johnson-Corey-Chaykovsky reaction.
A series of reduction reactions, including the hydrodecyanation of tertiary nitriles, reduction of imines to amines, and amides to aldehydes, can be effected by a composite reagent composed of sodium hydride and an alkali metal iodide (NaH:MI, M = Li, Na).
Although not commercially significant sodium hydride has been proposed for hydrogen storage for use in fuel cell vehicles. In one experimental implementation, plastic pellets containing NaH are crushed in the presence of water to release the hydrogen. One challenge with this technology is the regeneration of NaH from the NaOH.
Sodium hydride is sold as a mixture of 60% sodium hydride (w/w) in mineral oil. Such a dispersion is safer to handle and weigh than pure NaH. The compound is often used in this form but the pure grey solid can be prepared by rinsing the commercial product with pentane or THF, with care being taken because the waste solvent will contain traces of NaH and can ignite in air. Reactions involving NaH require air-free techniques. Typically NaH is used as a suspension in THF, a solvent that resists attack by strong bases but can solvate many reactive sodium compounds.
NaH can ignite in air, especially upon contact with water to release hydrogen, which is also flammable. Hydrolysis converts NaH into sodium hydroxide (NaOH), a caustic base. In practice, most sodium hydride is dispensed as a dispersion in oil, which can be safely handled in air.