Rectification (geometry)
Get Rectification Geometry essential facts below. View Videos or join the Rectification Geometry discussion. Add Rectification Geometry to your PopFlock.com topic list for future reference or share this resource on social media.
Rectification Geometry
A rectified cube is a cuboctahedron - edges reduced to vertices, and vertices expanded into new faces
A birectified cube is an octahedron - faces are reduced to points and new faces are centered on the original vertices.
A rectified cubic honeycomb - edges reduced to vertices, and vertices expanded into new cells.

In Euclidean geometry, rectification, also known as critical truncation or complete-truncation is the process of truncating a polytope by marking the midpoints of all its edges, and cutting off its vertices at those points.[1] The resulting polytope will be bounded by vertex figure facets and the rectified facets of the original polytope.

A rectification operator is sometimes denoted by the letter r with a Schläfli symbol. For example, r{4,3} is the rectified cube, also called a cuboctahedron, and also represented as . And a rectified cuboctahedron rr{4,3} is a rhombicuboctahedron, and also represented as .

Conway polyhedron notation uses a for ambo as this operator. In graph theory this operation creates a medial graph.

The rectification of any regular self-dual polyhedron or tiling will result in another regular polyhedron or tiling with a tiling order of 4, for example the tetrahedron {3,3} becoming an octahedron {3,4}. As a special case, a square tiling {4,4} will turn into another square tiling {4,4} under a rectification operation.

Example of rectification as a final truncation to an edge

Rectification is the final point of a truncation process. For example, on a cube this sequence shows four steps of a continuum of truncations between the regular and rectified form:

Cube truncation sequence.svg

Higher degree rectifications

Higher degree rectification can be performed on higher-dimensional regular polytopes. The highest degree of rectification creates the dual polytope. A rectification truncates edges to points. A birectification truncates faces to points. A trirectification truncates cells to points, and so on.

Example of birectification as a final truncation to a face

This sequence shows a birectified cube as the final sequence from a cube to the dual where the original faces are truncated down to a single point:

Birectified cube sequence.png

In polygons

The dual of a polygon is the same as its rectified form. New vertices are placed at the center of the edges of the original polygon.

In polyhedra and plane tilings

Each platonic solid and its dual have the same rectified polyhedron. (This is not true of polytopes in higher dimensions.)

The rectified polyhedron turns out to be expressible as the intersection of the original platonic solid with an appropriated scaled concentric version of its dual. For this reason, its name is a combination of the names of the original and the dual:

  1. The rectified tetrahedron, whose dual is the tetrahedron, is the tetratetrahedron, better known as the octahedron.
  2. The rectified octahedron, whose dual is the cube, is the cuboctahedron.
  3. The rectified icosahedron, whose dual is the dodecahedron, is the icosidodecahedron.
  4. A rectified square tiling is a square tiling.
  5. A rectified triangular tiling or hexagonal tiling is a trihexagonal tiling.

Examples

In nonregular polyhedra

If a polyhedron is not regular, the edge midpoints surrounding a vertex may not be coplanar. However, a form of rectification is still possible in this case: every polyhedron has a polyhedral graph as its 1-skeleton, and from that graph one may form the medial graph by placing a vertex at each edge midpoint of the original graph, and connecting two of these new vertices by an edge whenever they belong to consecutive edges along a common face. The resulting medial graph remains polyhedral, so by Steinitz's theorem it can be represented as a polyhedron.

The Conway polyhedron notation equivalent to rectification is ambo, represented by a. Applying twice aa, (rectifying a rectification) is Conway's expand operation, e, which is the same as Johnson's cantellation operation, t0,2 generated from regular polyhedral and tilings.

In 4-polytopes and 3D honeycomb tessellations

Each Convex regular 4-polytope has a rectified form as a uniform 4-polytope.

A regular 4-polytope {p,q,r} has cells {p,q}. Its rectification will have two cell types, a rectified {p,q} polyhedron left from the original cells and {q,r} polyhedron as new cells formed by each truncated vertex.

A rectified {p,q,r} is not the same as a rectified {r,q,p}, however. A further truncation, called bitruncation, is symmetric between a 4-polytope and its dual. See Uniform 4-polytope#Geometric derivations.

Examples

Degrees of rectification

A first rectification truncates edges down to points. If a polytope is regular, this form is represented by an extended Schläfli symbol notation t1{p,q,...} or r{p,q,...}.

A second rectification, or birectification, truncates faces down to points. If regular it has notation t2{p,q,...} or 2r{p,q,...}. For polyhedra, a birectification creates a dual polyhedron.

Higher degree rectifications can be constructed for higher dimensional polytopes. In general an n-rectification truncates n-faces to points.

If an n-polytope is (n-1)-rectified, its facets are reduced to points and the polytope becomes its dual.

Notations and facets

There are different equivalent notations for each degree of rectification. These tables show the names by dimension and the two type of facets for each.

Regular polygons

Facets are edges, represented as {2}.

name
{p}
Coxeter diagram t-notation
Schläfli symbol
Vertical Schläfli symbol
Name Facet-1 Facet-2
Parent CDel node 1.pngCDel p.pngCDel node.png t0{p} {p} {2}
Rectified CDel node.pngCDel p.pngCDel node 1.png t1{p} {p} {2}

Regular polyhedra and tilings

Facets are regular polygons.

name
{p,q}
Coxeter diagram t-notation
Schläfli symbol
Vertical Schläfli symbol
Name Facet-1 Facet-2
Parent CDel node 1.pngCDel p.pngCDel node.pngCDel q.pngCDel node.png = CDel node.pngCDel split1-pq.pngCDel nodes 10lu.png t0{p,q} {p,q} {p}
Rectified CDel node.pngCDel p.pngCDel node 1.pngCDel q.pngCDel node.png = CDel node 1.pngCDel split1-pq.pngCDel nodes.png t1{p,q} r{p,q} = {p} {q}
Birectified CDel node.pngCDel p.pngCDel node.pngCDel q.pngCDel node 1.png = CDel node.pngCDel split1-pq.pngCDel nodes 01ld.png t2{p,q} {q,p} {q}

Regular Uniform 4-polytopes and honeycombs

Facets are regular or rectified polyhedra.

name
{p,q,r}
Coxeter diagram t-notation
Schläfli symbol
Extended Schläfli symbol
Name Facet-1 Facet-2
Parent CDel node 1.pngCDel p.pngCDel node.pngCDel q.pngCDel node.pngCDel r.pngCDel node.png t0{p,q,r} {p,q,r} {p,q}
Rectified CDel node.pngCDel p.pngCDel node 1.pngCDel q.pngCDel node.pngCDel r.pngCDel node.png t1{p,q,r} = r{p,q,r} = r{p,q} {q,r}
Birectified
(Dual rectified)
CDel node.pngCDel p.pngCDel node.pngCDel q.pngCDel node 1.pngCDel r.pngCDel node.png t2{p,q,r} = r{r,q,p} {q,r} = r{q,r}
Trirectified
(Dual)
CDel node.pngCDel p.pngCDel node.pngCDel q.pngCDel node.pngCDel r.pngCDel node 1.png t3{p,q,r} {r,q,p} {r,q}

Regular 5-polytopes and 4-space honeycombs

Facets are regular or rectified 4-polytopes.

name
{p,q,r,s}
Coxeter diagram t-notation
Schläfli symbol
Extended Schläfli symbol
Name Facet-1 Facet-2
Parent CDel node 1.pngCDel p.pngCDel node.pngCDel q.pngCDel node.pngCDel r.pngCDel node.pngCDel s.pngCDel node.png t0{p,q,r,s} {p,q,r,s} {p,q,r}
Rectified CDel node.pngCDel p.pngCDel node 1.pngCDel q.pngCDel node.pngCDel r.pngCDel node.pngCDel s.pngCDel node.png t1{p,q,r,s} = r{p,q,r,s} = r{p,q,r} {q,r,s}
Birectified
(Birectified dual)
CDel node.pngCDel p.pngCDel node.pngCDel q.pngCDel node 1.pngCDel r.pngCDel node.pngCDel s.pngCDel node.png t2{p,q,r,s} = 2r{p,q,r,s} = r{r,q,p} = r{q,r,s}
Trirectified
(Rectified dual)
CDel node.pngCDel p.pngCDel node.pngCDel q.pngCDel node.pngCDel r.pngCDel node 1.pngCDel s.pngCDel node.png t3{p,q,r,s} = r{s,r,q,p} {r,q,p} = r{s,r,q}
Quadrirectified
(Dual)
CDel node.pngCDel p.pngCDel node.pngCDel q.pngCDel node.pngCDel r.pngCDel node.pngCDel s.pngCDel node 1.png t4{p,q,r,s} {s,r,q,p} {s,r,q}

See also

References

  1. ^ Weisstein, Eric W. "Rectification". MathWorld.

External links

Polyhedron operators
Seed Truncation Rectification Bitruncation Dual Expansion Omnitruncation Alternations
CDel node 1.pngCDel p.pngCDel node n1.pngCDel q.pngCDel node n2.png CDel node 1.pngCDel p.pngCDel node 1.pngCDel q.pngCDel node.png CDel node.pngCDel p.pngCDel node 1.pngCDel q.pngCDel node.png CDel node.pngCDel p.pngCDel node 1.pngCDel q.pngCDel node 1.png CDel node.pngCDel p.pngCDel node.pngCDel q.pngCDel node 1.png CDel node 1.pngCDel p.pngCDel node.pngCDel q.pngCDel node 1.png CDel node 1.pngCDel p.pngCDel node 1.pngCDel q.pngCDel node 1.png CDel node h.pngCDel p.pngCDel node.pngCDel q.pngCDel node.png CDel node.pngCDel p.pngCDel node h.pngCDel q.pngCDel node h.png CDel node h.pngCDel p.pngCDel node h.pngCDel q.pngCDel node h.png
Uniform polyhedron-43-t0.svg Uniform polyhedron-43-t01.svg Uniform polyhedron-43-t1.svg Uniform polyhedron-43-t12.svg Uniform polyhedron-43-t2.svg Uniform polyhedron-43-t02.png Uniform polyhedron-43-t012.png Uniform polyhedron-33-t0.png Uniform polyhedron-43-h01.svg Uniform polyhedron-43-s012.png
t0{p,q}
{p,q}
t01{p,q}
t{p,q}
t1{p,q}
r{p,q}
t12{p,q}
2t{p,q}
t2{p,q}
2r{p,q}
t02{p,q}
rr{p,q}
t012{p,q}
tr{p,q}
ht0{p,q}
h{q,p}
ht12{p,q}
s{q,p}
ht012{p,q}
sr{p,q}

  This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.

Rectification_(geometry)
 



 



 
Music Scenes