Probability density function Using maximum convention | |||
Cumulative distribution function | |||
Notation | or | ||
---|---|---|---|
Parameters | |||
Support | |||
CDF | |||
Mean | |||
Median | |||
Mode | any value in | ||
Variance | |||
Skewness | 0 | ||
Ex. kurtosis | |||
Entropy | |||
MGF | |||
CF |
In probability theory and statistics, the continuous uniform distribution or rectangular distribution is a family of symmetric probability distributions. The distribution describes an experiment where there is an arbitrary outcome that lies between certain bounds.^{[1]} The bounds are defined by the parameters, a and b, which are the minimum and maximum values. The interval can be either be closed (eg. [a, b]) or open (eg. (a, b)).^{[2]} Therefore, the distribution is often abbreviated U (a, b), where U stands for uniform distribution.^{[1]} The difference between the bounds defines the interval length; all intervals of the same length on the distribution's support are equally probable. It is the maximum entropy probability distribution for a random variable X under no constraint other than that it is contained in the distribution's support.^{[3]}
The probability density function of the continuous uniform distribution is:
The values of f(x) at the two boundaries a and b are usually unimportant because they do not alter the values of the integrals of f(x) dx over any interval, nor of x f(x) dx or any higher moment. Sometimes they are chosen to be zero, and sometimes chosen to be . The latter is appropriate in the context of estimation by the method of maximum likelihood. In the context of Fourier analysis, one may take the value of f(a) or f(b) to be , since then the inverse transform of many integral transforms of this uniform function will yield back the function itself, rather than a function which is equal "almost everywhere", i.e. except on a set of points with zero measure. Also, it is consistent with the sign function which has no such ambiguity.
Graphically, the probability density function is portrayed as a rectangle where is the base and is the height. As the distance between a and b increases, the density at any particular value within the distribution boundaries decreases.^{[4]} Since the probability density function integrates to 1, the height of the probability density function decreases as the base length increases.^{[4]}
In terms of mean ? and variance ?^{2}, the probability density may be written as:
For random variable X
Find :
In graphical representation of uniform distribution function [f(x) vs x], the area under the curve within the specified bounds displays the probability (shaded area is depicted as a rectangle). For this specific example above, the base would be and the height would be .^{[5]}
For random variable X
Find :
The example above is for a conditional probability case for the uniform distribution: given is true, what is the probability that . Conditional probability changes the sample space so a new interval length has to be calculated, where b is 23 and a is 8.^{[5]} The graphical representation would still follow Example 1, where the area under the curve within the specified bounds displays the probability and the base of the rectangle would be and the height .^{[5]}
The cumulative distribution function is:
Its inverse is:
In mean and variance notation, the cumulative distribution function is:
and the inverse is:
The moment-generating function is:^{[6]}
from which we may calculate the raw moments m _{k}
For the special case a = -b, that is, for
the moment-generating functions reduces to the simple form
For a random variable following this distribution, the expected value is then m_{1} = (a + b)/2 and the variance is m_{2} - m_{1}^{2} = (b - a)^{2}/12.
For n >= 2, the nth cumulant of the uniform distribution on the interval [−1/2, 1/2] is B_{n}/n, where B_{n} is the nth Bernoulli number.^{[8]}
Restricting and , the resulting distribution U(0,1) is called a standard uniform distribution.
One interesting property of the standard uniform distribution is that if u_{1} has a standard uniform distribution, then so does 1-u_{1}. This property can be used for generating antithetic variates, among other things. In other words, this property is known as the inversion method where the continuous standard uniform distribution can be used to generate random numbers for any other continuous distribution.^{[4]} If u is a uniform random number with standard uniform distribution (0,1), then generates a random number x from any continuous distribution with the specified cumulative distribution function F.^{[4]}
As long as the same conventions are followed at the transition points, the probability density function may also be expressed in terms of the Heaviside step function:
or in terms of the rectangle function
There is no ambiguity at the transition point of the sign function. Using the half-maximum convention at the transition points, the uniform distribution may be expressed in terms of the sign function as:
The mean (first moment) of the distribution is:
The second moment of the distribution is:
In general, the n-th moment of the uniform distribution is:
The variance (second central moment) is:
Let X_{1}, ..., X_{n} be an i.i.d. sample from U(0,1). Let X_{(k)} be the kth order statistic from this sample. Then the probability distribution of X_{(k)} is a Beta distribution with parameters k and . The expected value is
This fact is useful when making Q-Q plots.
The variances are
See also: Order statistic § Probability distributions of order statistics
The probability that a uniformly distributed random variable falls within any interval of fixed length is independent of the location of the interval itself (but it is dependent on the interval size), so long as the interval is contained in the distribution's support.
To see this, if X ~ U(a,b) and [x, x+d] is a subinterval of [a,b] with fixed d > 0, then
This distribution can be generalized to more complicated sets than intervals. If S is a Borel set of positive, finite measure, the uniform probability distribution on S can be specified by defining the pdf to be zero outside S and constantly equal to 1/K on S, where K is the Lebesgue measure of S.
Given a uniform distribution on [0, b] with unknown b, the minimum-variance unbiased estimator (UMVUE) for the maximum is given by
where m is the sample maximum and k is the sample size, sampling without replacement (though this distinction almost surely makes no difference for a continuous distribution). This follows for the same reasons as estimation for the discrete distribution, and can be seen as a very simple case of maximum spacing estimation. This problem is commonly known as the German tank problem, due to application of maximum estimation to estimates of German tank production during World War II.
The maximum likelihood estimator is given by:
where m is the sample maximum, also denoted as the maximum order statistic of the sample.
The method of moments estimator is given by:
where is the sample mean.
The midpoint of the distribution (a + b) / 2 is both the mean and the median of the uniform distribution. Although both the sample mean and the sample median are unbiased estimators of the midpoint, neither is as efficient as the sample mid-range, i.e. the arithmetic mean of the sample maximum and the sample minimum, which is the UMVU estimator of the midpoint (and also the maximum likelihood estimate).
Let X_{1}, X_{2}, X_{3}, ..., X_{n} be a sample from U( 0, L ) where L is the population maximum. Then X_{(n)} = max( X_{1}, X_{2}, X_{3}, ..., X_{n} ) has the density^{[9]}
The confidence interval for the estimated population maximum is then ( X_{(n)}, X_{(n)} / ?^{1/n} ) where 100(1 - ?)% is the confidence level sought. In symbols
In statistics, when a p-value is used as a test statistic for a simple null hypothesis, and the distribution of the test statistic is continuous, then the p-value is uniformly distributed between 0 and 1 if the null hypothesis is true.
The probabilities for uniform distribution function are simple to calculate due to the simplicity of the function form.^{[2]} Therefore, there are various applications that this distribution can be used for as shown below: hypothesis testing situations, random sampling cases, finance, etc. Furthermore, generally, experiments of physical origin follow a uniform distribution (eg. emission of radioactive particles).^{[1]} However, it is important to note that in any application, there is the unchanging assumption that the probability of falling in an interval of fixed length is constant.^{[2]}
In the field of economics, usually demand and replenishment may not follow the expected normal distribution. As a result, other distribution models are used to better predict probabilities and trends such as Bernoulli process.^{[10]} But according to Wanke (2008), in the particular case of investigating lead-time for inventory management at the beginning of the life cycle when a completely new product is being analyzed, the uniform distribution proves to be more useful.^{[10]} In this situation, other distribution may not be viable since there is no existing data on the new product or that the demand history is unavailable so there isn't really an appropriate or known distribution.^{[10]} The uniform distribution would be ideal in this situation since the random variable of lead-time (related to demand) is unknown for the new product but the results are likely to range between a plausible range of two values.^{[10]} The lead-time would thus represent the random variable. From the uniform distribution model, other factors related to lead-time were able to be calculated such as cycle service level and shortage per cycle. It was also noted that the uniform distribution was also used due to the simplicity of the calculations.^{[10]}
The uniform distribution is useful for sampling from arbitrary distributions. A general method is the inverse transform sampling method, which uses the cumulative distribution function (CDF) of the target random variable. This method is very useful in theoretical work. Since simulations using this method require inverting the CDF of the target variable, alternative methods have been devised for the cases where the cdf is not known in closed form. One such method is rejection sampling.
The normal distribution is an important example where the inverse transform method is not efficient. However, there is an exact method, the Box-Muller transformation, which uses the inverse transform to convert two independent uniform random variables into two independent normally distributed random variables.
In analog-to-digital conversion a quantization error occurs. This error is either due to rounding or truncation. When the original signal is much larger than one least significant bit (LSB), the quantization error is not significantly correlated with the signal, and has an approximately uniform distribution. The RMS error therefore follows from the variance of this distribution.
There are many applications in which it is useful to run simulation experiments. Many programming languages come with implementations to generate pseudo-random numbers which are effectively distributed according to the standard uniform distribution.
If u is a value sampled from the standard uniform distribution, then the value a + (b - a)u follows the uniform distribution parametrised by a and b, as described above.
While the historical origins in the conception of uniform distribution are inconclusive, it is speculated that the term 'uniform' arose from the concept of equiprobability in dice games (note that the dice games would have discrete and not continuous uniform sample space). Equiprobability was mentioned in Gerolamo Cardano's Liber de Ludo Aleae, a manual written in 16th century and detailed on advanced probability calculus in relation to dice.^{[11]}