In heraldry, an orle is a subordinary consisting of a narrow band occupying the inward half of where a bordure would be, following the exact outline of the shield but within it, showing the field between the outer edge of the orle and the edge of the shield.
An orle can sometimes be confused with an inescutcheon or escutcheon voided (a smaller shield with a shield-shaped hole), or with a patch of the field left over between a bordure and an inescutcheon.
Orles may varied by any of the lines of variation.
A tressure is a subordinary that can be regarded as a diminutive of an orle. John Woodward is of the opinion that "a plain tressure is a diminutive of the orle, and is depicted half its thickness". A tressure is described as representing the circular raised line on a coin that shows the user if the coin has been clipped or overly worn. A double tressure is normally an 'orle gemel', i.e. an orle divided into two narrow ones set closely together, one inside the other, with artists interpreting it as composed of two narrow orles each being one-third or one-fourth the width and the void between them being one-third or one-half the width. A. C. Fox-Davies argued that a tressure is by necessity doubled, otherwise it would be an orle. However, examples exist of coats of arms with a single tressure, as in the arms of Edward Lawrence.
Plain tressures are rare. It is much more common to see tressures flory-counter-flory, especially in Scottish heraldry, where many coats of arms derive from the Royal Coat of Arms, in which the tressure represents the Auld Alliance with France (fleurs-de-lys being a French symbol). As a result the double tressure flory-counter-flory is often referred to as 'the royal tressure'.
Example of a double tressure impaled, the arms of Isabella of Scotland