Thermoelectricity

Get Thermoelectricity essential facts below. View Videos or join the Thermoelectricity discussion. Add Thermoelectricity to your PopFlock.com topic list for future reference or share this resource on social media.
## Seebeck effect

## Peltier effect

## Thomson effect

## Full thermoelectric equations

## Thomson relations

## Applications

### Thermoelectric generators

### Peltier effect

### Temperature measurement

## See also

## References

## Notes

## Further reading

## External links

This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.

Thermoelectricity

The **thermoelectric effect** is the direct conversion of temperature differences to electric voltage and vice versa via a thermocouple.^{[1]} A thermoelectric device creates voltage when there is a different temperature on each side. Conversely, when a voltage is applied to it, heat is transferred from one side to the other, creating a temperature difference. At the atomic scale, an applied temperature gradient causes charge carriers in the material to diffuse from the hot side to the cold side.

This effect can be used to generate electricity, measure temperature or change the temperature of objects. Because the direction of heating and cooling is determined by the polarity of the applied voltage, thermoelectric devices can be used as temperature controllers.

The term "thermoelectric effect" encompasses three separately identified effects: the **Seebeck effect**, **Peltier effect**, and **Thomson effect**. The Seebeck and Peltier effects are different manifestations of the same physical process; textbooks may refer to this process as the **Peltier-Seebeck effect** (the separation derives from the independent discoveries by French physicist Jean Charles Athanase Peltier and Baltic German physicist Thomas Johann Seebeck). The Thomson effect is an extension of the Peltier-Seebeck model and is credited to Lord Kelvin.

Joule heating, the heat that is generated whenever a current is passed through a resistive material, is not generally termed a thermoelectric effect. The Peltier-Seebeck and Thomson effects are thermodynamically reversible,^{[2]} whereas Joule heating is not.

The **Seebeck effect** is the conversion of heat directly into electricity at the junction of different types of wire. Originally discovered in 1794 by Italian scientist Alessandro Volta,^{[3]}^{[note 1]} it is named after the Baltic German physicist Thomas Johann Seebeck, who in 1821 independently rediscovered it.^{[4]} It was observed that a compass needle would be deflected by a closed loop formed by two different metals joined in two places, with a temperature difference between the joints. This was because the electron energy levels in each metal shifted differently and a potential difference between the junctions created an electrical current and therefore a magnetic field around the wires. Seebeck did not recognize that there was an electric current involved, so he called the phenomenon "thermomagnetic effect". Danish physicist Hans Christian Ørsted rectified the oversight and coined the term "thermoelectricity".^{[5]}

The Seebeck effect is a classic example of an electromotive force (emf) and leads to measurable currents or voltages in the same way as any other emf. The local current density is given by

where is the local voltage,^{[6]} and is the local conductivity. In general, the Seebeck effect is described locally by the creation of an electromotive field

where is the Seebeck coefficient (also known as thermopower), a property of the local material, and is the temperature gradient.

The Seebeck coefficients generally vary as function of temperature and depend strongly on the composition of the conductor. For ordinary materials at room temperature, the Seebeck coefficient may range in value from -100 ?V/K to +1,000 ?V/K (see Seebeck coefficient article for more information).

If the system reaches a steady state, where , then the voltage gradient is given simply by the emf: . This simple relationship, which does not depend on conductivity, is used in the thermocouple to measure a temperature difference; an absolute temperature may be found by performing the voltage measurement at a known reference temperature. A metal of unknown composition can be classified by its thermoelectric effect if a metallic probe of known composition is kept at a constant temperature and held in contact with the unknown sample that is locally heated to the probe temperature. It is used commercially to identify metal alloys. Thermocouples in series form a thermopile. Thermoelectric generators are used for creating power from heat differentials.

When an electric current is passed through a circuit of a thermocouple, heat is evolved at one junction and absorbed at the other junction.This is known as Peltier Effect. The **Peltier effect** is the presence of heating or cooling at an electrified junction of two different conductors and is named after French physicist Jean Charles Athanase Peltier, who discovered it in 1834.^{[7]} When a current is made to flow through a junction between two conductors, A and B, heat may be generated or removed at the junction. The Peltier heat generated at the junction per unit time is

where and are the Peltier coefficients of conductors A and B, and is the electric current (from A to B). The total heat generated is not determined by the Peltier effect alone, as it may also be influenced by Joule heating and thermal-gradient effects (see below).

The Peltier coefficients represent how much heat is carried per unit charge. Since charge current must be continuous across a junction, the associated heat flow will develop a discontinuity if and are different. The Peltier effect can be considered as the back-action counterpart to the Seebeck effect (analogous to the back-emf in magnetic induction): if a simple thermoelectric circuit is closed, then the Seebeck effect will drive a current, which in turn (by the Peltier effect) will always transfer heat from the hot to the cold junction. The close relationship between Peltier and Seebeck effects can be seen in the direct connection between their coefficients: (see below).

A typical Peltier heat pump involves multiple junctions in series, through which a current is driven. Some of the junctions lose heat due to the Peltier effect, while others gain heat. Thermoelectric heat pumps exploit this phenomenon, as do thermoelectric cooling devices found in refrigerators.

In different materials, the Seebeck coefficient is not constant in temperature, and so a spatial gradient in temperature can result in a gradient in the Seebeck coefficient. If a current is driven through this gradient, then a continuous version of the Peltier effect will occur. This **Thomson effect** was predicted and subsequently observed in 1851 by Lord Kelvin (William Thomson).^{[8]} It describes the heating or cooling of a current-carrying conductor with a temperature gradient.

If a current density is passed through a homogeneous conductor, the Thomson effect predicts a heat production rate per unit volume

where is the temperature gradient, and is the Thomson coefficient. The Thomson coefficient is related to the Seebeck coefficient as (see below). This equation, however, neglects Joule heating and ordinary thermal conductivity (see full equations below).

Often, more than one of the above effects is involved in the operation of a real thermoelectric device. The Seebeck effect, Peltier effect, and Thomson effect can be gathered together in a consistent and rigorous way, described here; the effects of Joule heating and ordinary heat conduction are included as well. As stated above, the Seebeck effect generates an electromotive force, leading to the current equation^{[9]}

To describe the Peltier and Thomson effects the flow of energy must be considered. To start, the dynamic case where both temperature and charge may be varying with time can be considered. The full thermoelectric equation for the energy accumulation, , is^{[9]}

where is the thermal conductivity. The first term is the Fourier's heat conduction law, and the second term shows the energy carried by currents. The third term, , is the heat added from an external source (if applicable).

In the case where the material has reached a steady state, the charge and temperature distributions are stable, so one must have both and . Using these facts and the second Thomson relation (see below), the heat equation then can be simplified to

The middle term is the Joule heating, and the last term includes both Peltier ( at junction) and Thomson ( in thermal gradient) effects. Combined with the Seebeck equation for , this can be used to solve for the steady-state voltage and temperature profiles in a complicated system.

If the material is not in a steady state, a complete description will also need to include dynamic effects such as relating to electrical capacitance, inductance, and heat capacity.

In 1854, Lord Kelvin found relationships between the three coefficients, implying that the Thomson, Peltier, and Seebeck effects are different manifestations of one effect (uniquely characterized by the Seebeck coefficient).^{[10]}

The first Thomson relation is^{[9]}

where is the absolute temperature, is the Thomson coefficient, is the Peltier coefficient, and is the Seebeck coefficient. This relationship is easily shown given that the Thomson effect is a continuous version of the Peltier effect. Using the second relation (described next), the first Thomson relation becomes .

The second Thomson relation is

This relation expresses a subtle and fundamental connection between the Peltier and Seebeck effects. It was not satisfactorily proven until the advent of the Onsager relations, and it is worth noting that this second Thomson relation is only guaranteed for a time-reversal symmetric material; if the material is placed in a magnetic field or is itself magnetically ordered (ferromagnetic, antiferromagnetic, etc.), then the second Thomson relation does not take the simple form shown here.^{[11]}

The Thomson coefficient is unique among the three main thermoelectric coefficients because it is the only one directly measurable for individual materials. The Peltier and Seebeck coefficients can only be easily determined for pairs of materials; hence, it is difficult to find values of absolute Seebeck or Peltier coefficients for an individual material.

If the Thomson coefficient of a material is measured over a wide temperature range, it can be integrated using the Thomson relations to determine the absolute values for the Peltier and Seebeck coefficients. This needs to be done only for one material, since the other values can be determined by measuring pairwise Seebeck coefficients in thermocouples containing the reference material and then adding back the absolute Seebeck coefficient of the reference material. For more details on absolute Seebeck coefficient determination, see Seebeck coefficient.

The Seebeck effect is used in thermoelectric generators, which function like heat engines, but are less bulky, have no moving parts, and are typically more expensive and less efficient. They have a use in power plants for converting waste heat into additional electrical power (a form of energy recycling) and in automobiles as automotive thermoelectric generators (ATGs) for increasing fuel efficiency. Space probes often use radioisotope thermoelectric generators with the same mechanism but using radioisotopes to generate the required heat difference. Recent uses include stove fans,^{[12]} lighting powered by body heat^{[13]} and a smartwatch powered by body heat.^{[14]}

The Peltier effect can be used to create a refrigerator that is compact and has no circulating fluid or moving parts. Such refrigerators are useful in applications where their advantages outweigh the disadvantage of their very low efficiency. The Peltier effect is also used by many thermal cyclers, laboratory devices used to amplify DNA by the polymerase chain reaction (PCR). PCR requires the cyclic heating and cooling of samples to specified temperatures. The inclusion of many thermocouples in a small space enables many samples to be amplified in parallel.

Thermocouples and thermopiles are devices that use the Seebeck effect to measure the temperature difference between two objects. Thermocouples are often used to measure high temperatures, holding the temperature of one junction constant or measuring it independently (cold junction compensation). Thermopiles use many thermocouples electrically connected in series, for sensitive measurements of very small temperature difference.

- Nernst effect - a thermoelectric phenomenon when a sample allowing electrical conduction in a magnetic field and a temperature gradient normal (perpendicular) to each other
- Ettingshausen effect - thermoelectric phenomenon affecting current in a conductor in a magnetic field
- Pyroelectricity - the creation of an electric polarization in a crystal after heating/cooling, an effect distinct from thermoelectricity
- Thermogalvanic cell - the production of electrical power from a galvanic cell with electrodes at different temperatures

**^**"The Peltier Effect and Thermoelectric Cooling".*ffden-2.phys.uaf.edu*.**^**As the "figure of merit" approaches infinity, the Peltier-Seebeck effect can drive a heat engine or refrigerator at closer and closer to the Carnot efficiency. Disalvo, F. J. (1999). "Thermoelectric Cooling and Power Generation".*Science*.**285**(5428): 703-6. doi:10.1126/science.285.5428.703. PMID 10426986. Any device that works at the Carnot efficiency is thermodynamically reversible, a consequence of classical thermodynamics.**^**Goupil, Christophe; Ouerdane, Henni; Zabrocki, Knud; Seifert, Wolfgang; Hinsche, Nicki F.; Müller, Eckhard (2016). "Thermodynamics and thermoelectricity". In Goupil, Christophe (ed.).*Continuum Theory and Modeling of Thermoelectric Elements*. New York, New York, USA: Wiley-VCH. pp. 2-3. ISBN 9783527413379.**^**Seebeck (1822). "Magnetische Polarisation der Metalle und Erze durch Temperatur-Differenz" [Magnetic polarization of metals and ores by temperature differences].*Abhandlungen der Königlichen Akademie der Wissenschaften zu Berlin*(in German): 265-373.**^**See:- OErsted (1823). "Nouvelles expériences de M. Seebeck sur les actions électro-magnetiques" [New experiments by Mr. Seebeck on electro-magnetic actions].
*Annales de chimie*. 2nd series (in French).**22**: 199-201. From pp. 199-200:*"Il faudra sans doute désormais distinguer cette nouvelle classes de circuits électriques par une dénomination significative; et comme telle je propose l'expression de*circuits thermo-électriques*ou peut-être*thermélectriques*... "*(It's undoubtedly necessary to distinguish henceforth this new class of electrical circuits by an indicative name; and as such I propose the expression "thermo-electric circuits" or perhaps "thermelectric circuits" ... ) - Oersted (1823). "Notiz von neuen electrisch-magnetischen Versuchen des Herrn Seebeck in Berlin" [Notice of new electro-magnetic experiments of Mr. Seebeck in Berlin].
*Annalen der Physik*(in German).**73**: 430-432. Bibcode:1823AnP....73..430O. doi:10.1002/andp.18230730410.

- OErsted (1823). "Nouvelles expériences de M. Seebeck sur les actions électro-magnetiques" [New experiments by Mr. Seebeck on electro-magnetic actions].
**^**The voltage in this case does not refer to electric potential but rather the "voltmeter" voltage , where is the Fermi level.**^**Peltier (1834). "Nouvelles expériences sur la caloricité des courants électrique" [New experiments on the heat effects of electric currents].*Annales de Chimie et de Physique*(in French).**56**: 371-386.**^**Thomson, William (1851). "On a mechanical theory of thermo-electric currents".*Proceedings of the Royal Society of Edinburgh*.**3**(42): 91-98.- ^
^{a}^{b}^{c}"A.11 Thermoelectric effects". Eng.fsu.edu. 2002-02-01. Retrieved . **^**Thomson, William (1854). "On the dynamical theory of heat. Part V. Thermo-electric currents".*Transactions of the Royal Society of Edinburgh*.**21**: 123-171.**^**There is a generalized second Thomson relation relating anisotropic Peltier and Seebeck coefficients with reversed magnetic field and magnetic order. See, for example, Rowe, D. M., ed. (2010).*Thermoelectrics Handbook: Macro to Nano*. CRC Press. ISBN 9781420038903.**^**"https://stovefanreviews.com/teg-module-and-seebeck-effect/"**^**"http://www.gizmag.com/lumen-flashlight/39893/**^**"https://www.technologyreview.com/s/602874/body-heat-powers-this-smart-watch"

**^**In 1794, Volta found that if a temperature difference existed between the ends of an iron rod, then it could excite spasms of a frog's leg. His apparatus consisted of two glasses of water. Dipped in each glass was a wire that was connected to one or the other hind leg of a frog. An iron rod was bent into a bow and one end was heated in boiling water. When the ends of the iron bow were dipped into the two glasses, a thermoelectric current passed through the frog's legs and caused them to twitch. See:- Volta, Alessandro (1794). "Nuova memoria sull'elettricità animale del Sig. Don Alessandro Volta ... in alcune lettere al Sig. Ab. Anton Maria Vassalli ..." [New memoir on animal electricity from Don Alessandro Volta ... in some letters to Abbot Antonio Maria Vassalli ...].
*Annali di chimica e storia naturale (Annals of chemistry and natural history)*(in Italian).**5**: 132-144. ; see p. 139. - Reprinted in: Volta, Alessandro (1816)
*Collezione dell'Opere del Cavaliere Conte Alessandro Volta*... [Collection of the works of Count Alessandro Volta ... ]. (in Italian) Florence (Firenze), (Italy): Guglielmo Piatti. vol. 2, part 1.*"Nuova memoria sull'elettricità animale, divisa in tre lettere, dirette al Signor Abate Anton Maria Vassalli ... Lettera Prima"*(New memoir on animal electricity, divided into three letters, addressed to Abbot Antonio Maria Vassalli ... First letter), pp. 197-206 ; see p. 202.

*" ... tuffava nell'acqua bollente un capo di tal arco per qualche mezzo minuto, ... inetto de tutto ad eccitare le convulsioni dell'animale."*( ... I dipped into boiling water one end of such an arc [of iron rod] for about half a minute, then I took it out and without giving it time to cool, resumed the experiment with the two glasses of cool water; and [it was] at this point that the frog in the bath convulsed; and this [happened] even two, three, four times, [upon] repeating the experiment; until, [having] cooled - by such dips [that were] more or less long and repeated, or by a longer exposure to the air - the end of the iron [rod that had been] dipped earlier into the hot water, this arc returned [to being] completely incapable of exciting convulsions of the animal.)- Volta, Alessandro (1794). "Nuova memoria sull'elettricità animale del Sig. Don Alessandro Volta ... in alcune lettere al Sig. Ab. Anton Maria Vassalli ..." [New memoir on animal electricity from Don Alessandro Volta ... in some letters to Abbot Antonio Maria Vassalli ...].

- Rowe, D. M., ed. (2006).
*Thermoelectrics Handbook:Macro to Nano*. Taylor & Francis. ISBN 0-8493-2264-2. - P.M. Jack (2003). "Physical Space as a Quaternion Structure I: Maxwell Equations. A Brief Note.". Toronto, Canada arXiv:math-ph/0307038v1
- Besançon, Robert M. (1985).
*The Encyclopedia of Physics*(Third ed.). Van Nostrand Reinhold Company. ISBN 0-442-25778-3. - Ioffe, A.F. (1957).
*Semiconductor Thermoelements and Thermoelectric Cooling*. Infosearch Limited. ISBN 0-85086-039-3. - Thomson, William (1851). "On a mechanical theory of thermoelectric currents".
*Proc.Roy.Soc.Edinburgh*: 91-98.

This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.

Popular Products

Music Scenes

Popular Artists