Get Standard Displacement essential facts below. View Videos or join the Standard Displacement discussion. Add Standard Displacement to your PopFlock.com topic list for future reference or share this resource on social media.
Load lines, by showing how low a ship is sitting in the water, make it possible to determine displacement
The displacement or displacement tonnage of a ship is its weight. As the term indicates, it is measured indirectly, using Archimedes' principle, by first calculating the volume of water displaced by the ship, then converting that value into weight. Traditionally, various measurement rules have been in use, giving various measures in long tons. Today, metric tonnes are more commonly used.
Ship displacement varies by a vessel's degree of load, from its empty weight as designed (known as "lightweight tonnage") to its maximum load. Numerous specific terms are used to describe varying levels of load and trim, detailed below.
Shipboard stability computer programs can be used to calculate a vessel's displacement
The process of determining a vessel's displacement begins with measuring its draft This is accomplished by means of its "draft marks" (or "load lines"). A merchant vessel has three matching sets: one mark each on the port and starboard sides forward, midships, and astern. These marks allow a ship's displacement to be determined to an accuracy of 0.5%.
The draft observed at each set of marks is averaged to find a mean draft. The ship's hydrostatic tables show the corresponding volume displaced.
To calculate the weight of the displaced water, it is necessary to know its density. Seawater (1025 kg/m3) is more dense than fresh water (1000 kg/m3); so a ship will ride higher in salt water than in fresh. The density of water also varies with temperature.
Devices akin to slide rules have been available since the 1950s to aid in these calculations. It is done today with computers.
USS Aaron Ward (DD-132), a Wickes-class destroyer, and USS Abel P. Upshur (DD-193), a Clemson-class destroyer, berthed alongside each other. USS Abel P. Upshur on the outboard lies lower in the water as it is more heavily loaded and displaces more water.
There are terms for the displacement of a vessel under specified conditions:
Loaded displacement is the weight of the ship including cargo, passengers, fuel, water, stores, dunnage and such other items necessary for use on a voyage. These bring the ship down to its "load draft", colloquially known as the "waterline".
Full load displacement and loaded displacement have almost identical definitions. Full load is defined as the displacement of a vessel when floating at its greatest allowable draft as established by a classification society (and designated by its "waterline"). Warships have arbitrary full load condition established.
Deep load condition means full ammunition and stores, with most available fuel capacity used.
Light displacement (LDT) is defined as the weight of the ship excluding cargo, fuel, water, ballast, stores, passengers, crew, but with water in boilers to steaming level.
Normal displacement is the ship's displacement "with all outfit, and two-thirds supply of stores, ammunition, etc., on board."
Standard displacement, also known as "Washington displacement", is a specific term defined by the Washington Naval Treaty of 1922. It is the displacement of the ship complete, fully manned, engined, and equipped ready for sea, including all armament and ammunition, equipment, outfit, provisions and fresh water for crew, miscellaneous stores, and implements of every description that are intended to be carried in war, but without fuel or reserve boiler feed water on board.
A floating ship's displacement Fp and buoyancy Fa must be equal