Get Stable Distribution essential facts below. View Videos or join the Stable Distribution discussion. Add Stable Distribution to your PopFlock.com topic list for future reference or share this resource on social media.
Probability density function
Symmetric ?-stable distributions with unit scale factor Skewed centered stable distributions with unit scale factor
Cumulative distribution function
CDFs for symmetric ?-stable distributions CDFs for skewed centered stable distributions
? ? (0, 2] -- stability parameter
? ? [-1, 1] -- skewness parameter (note that skewness is undefined) c ? (0, ?) -- scale parameter
Of the four parameters defining the family, most attention has been focused on the stability parameter, ? (see panel). Stable distributions have 0 < ? normal distribution, and ? = 1 to the Cauchy distribution. The distributions have undefined variance for ? < 2, and undefined mean for ? attractors" for properly normed sums of independent and identically distributed (iid) random variables. The normal distribution defines a family of stable distributions. By the classical central limit theorem the properly normed sum of a set of random variables, each with finite variance, will tend toward a normal distribution as the number of variables increases. Without the finite variance assumption, the limit may be a stable distribution that is not normal. Mandelbrot referred to such distributions as "stable Paretian distributions", after Vilfredo Pareto. In particular, he referred to those maximally skewed in the positive direction with 1 < ? < 2 as "Pareto-Lévy distributions", which he regarded as better descriptions of stock and commodity prices than normal distributions.
Let X1 and X2 be independent copies of a random variableX. Then X is said to be stable if for any constants a > 0 and b > 0 the random variable aX1 + bX2 has the same distribution as cX + d for some constants c > 0 and d. The distribution is said to be strictly stable if this holds with d = 0.
Such distributions form a four-parameter family of continuous probability distributions parametrized by location and scale parameters ? and c, respectively, and two shape parameters ? and ?, roughly corresponding to measures of asymmetry and concentration, respectively (see the figures).
The characteristic function ?(t) of any probability distribution is just the Fourier transform of its probability density function f(x). The density function is therefore the inverse Fourier transform of the characteristic function.
Although the probability density function for a general stable distribution cannot be written analytically, the general characteristic function can be expressed analytically. A random variable X is called stable if its characteristic function can be written as
? ? R is a shift parameter, ? ? [-1, 1], called the skewness parameter, is a measure of asymmetry. Notice that in this context the usual skewness is not well defined, as for ? < 2 the distribution does not admit 2nd or higher moments, and the usual skewness definition is the 3rd central moment.
The reason this gives a stable distribution is that the characteristic function for the sum of two random variables equals the product of the two corresponding characteristic functions. Adding two random variables from a stable distribution gives something with the same values of ? and ?, but possibly different values of ? and c.
Not every function is the characteristic function of a legitimate probability distribution (that is, one whose cumulative distribution function is real and goes from 0 to 1 without decreasing), but the characteristic functions given above will be legitimate so long as the parameters are in their ranges. The value of the characteristic function at some value t is the complex conjugate of its value at -t as it should be so that the probability distribution function will be real.
In the simplest case ? = 0, the characteristic function is just a stretched exponential function; the distribution is symmetric about ? and is referred to as a (Lévy) symmetric alpha-stable distribution, often abbreviated S?S.
When ? < 1 and ? = 1, the distribution is supported by [?, ?).
The parameter c > 0 is a scale factor which is a measure of the width of the distribution while ? is the exponent or index of the distribution and specifies the asymptotic behavior of the distribution.
The above definition is only one of the parametrizations in use for stable distributions; it is the most common but is not continuous in the parameters at ? = 1.
The ranges of ? and ? are the same as before, ? (like c) should be positive, and ? (like ?) should be real.
In either parametrization one can make a linear transformation of the random variable to get a random variable whose density is . In the first parametrization, this is done by defining the new variable:
For the second parametrization, we simply use
no matter what ? is. In the first parametrization, if the mean exists (that is, ? > 1) then it is equal to ?, whereas in the second parametrization when the mean exists it is equal to
A stable distribution is therefore specified by the above four parameters. It can be shown that any non-degenerate stable distribution has a smooth (infinitely differentiable) density function. If denotes the density of X and Y is the sum of independent copies of X:
then Y has the density with
The asymptotic behavior is described, for ?< 2, by:
where ? is the Gamma function (except that when ? ≥ 1 and ? = ±1, the tail does not vanish to the left or right, resp., of ?, although the above expression is 0). This "heavy tail" behavior causes the variance of stable distributions to be infinite for all ? < 2. This property is illustrated in the log-log plots below.
When ? = 2, the distribution is Gaussian (see below), with tails asymptotic to exp(-x2/4c2)/(2c).
One-sided stable distribution and stable count distribution
When ? < 1 and ? = 1, the distribution is supported by [?, ?). This family is called one-sided stable distribution. Its standard distribution (?=0) is defined as
, where .
Let , its characteristic function is . Thus the integral form of its PDF is (note: )
The double-sine integral is more effective for very small .
Consider the Lévy sum where , then Y has the density where . Set , we arrive at the stable count distribution. Its standard distribution is defined as
, where and .
The stable count distribution is the conjugate prior of the one-sided stable distribution. Its location-scale family is defined as
, where , , and .
It is also a one-sided distribution supported by . The location parameter is the cut-off location, while defines its scale.
Its mean is and its standard deviation is . It is hypothesized that VIX is distributed like with and (See Section 7 of ). Thus the stable count distribution is the first-order marginal distribution of a volatility process. In this context, is called the "floor volatility".
Another approach to derive the stable count distribution is to use the Laplace transform of the one-sided stable distribution, (Section 2.4 of )
This is called the "lambda decomposition" (See Section 4 of ) since the right hand side was named as "symmetric lambda distribution" in Lihn's former works. However, it has several more popular names such as "exponential power distribution", or the "generalized error/normal distribution", often referred to when ? > 1.
The n-th moment of is the -th moment of , All positive moments are finite. This in a way solves the thorny issue of diverging moments in the stable distribution.
Stable distributions are closed under convolution for a fixed value of ?. Since convolution is equivalent to multiplication of the Fourier-transformed function, it follows that the product of two stable characteristic functions with the same ? will yield another such characteristic function. The product of two stable characteristic functions is given by:
Since ? is not a function of the ?, c or ? variables it follows that these parameters for the convolved function are given by:
In each case, it can be shown that the resulting parameters lie within the required intervals for a stable distribution.
A generalized central limit theorem
Another important property of stable distributions is the role that they play in a generalized central limit theorem. The central limit theorem states that the sum of a number of independent and identically distributed (i.i.d.) random variables with finite non-zero variances will tend to a normal distribution as the number of variables grows.
A generalization due to Gnedenko and Kolmogorov states that the sum of a number of random variables with symmetric distributions having power-law tails (Paretian tails), decreasing as where (and therefore having infinite variance), will tend to a stable distribution as the number of summands grows. If then the sum converges to a stable distribution with stability parameter equal to 2, i.e. a Gaussian distribution.
There are other possibilities as well. For example, if the characteristic function of the random variable is asymptotic to for small t (positive or negative), then we may ask how t varies with n when the value of the characteristic function for the sum of n such random variables equals a given value u:
Assuming for the moment that t -> 0, we take the limit of the above as n -> ?:
This shows that is asymptotic to so using the previous equation we have
This implies that the sum divided by
has a characteristic function whose value at some t? goes to u (as n increases) when In other words, the characteristic function converges pointwise to and therefore by Lévy's continuity theorem the sum divided by
This can be applied to a random variable whose tails decrease as . This random variable has a mean but the variance is infinite. Let us take the following distribution:
We can write this as
We want to find the leading terms of the asymptotic expansion of the characteristic function. The characteristic function of the probability distribution is so the characteristic function for f(x) is
and we can calculate:
where and are constants. Therefore,
and according to what was said above (and the fact that the variance of f(x;2,0,1,0) is 2), the sum of n instances of this random variable, divided by will converge in distribution to a Gaussian distribution with variance 1. But the variance at any particular n will still be infinite. Note that the width of the limiting distribution grows faster than in the case where the random variable has a finite variance (in which case the width grows as the square root of n). The average, obtained by dividing the sum by n, tends toward a Gaussian whose width approaches zero as n increases, in accordance with the Law of large numbers.
Log-log plot of symmetric centered stable distribution PDF's showing the power law behavior for large x. The power law behavior is evidenced by the straight-line appearance of the PDF for large x, with the slope equal to -(?+1). (The only exception is for ? = 2, in black, which is a normal distribution.)
Log-log plot of skewed centered stable distribution PDF's showing the power law behavior for large x. Again the slope of the linear portions is equal to -(?+1)
For ? = 2 the distribution reduces to a Gaussian distribution with variance ?2 = 2c2 and mean ?; the skewness parameter ? has no effect.
For ? = 1 and ? = 0 the distribution reduces to a Cauchy distribution with scale parameter c and shift parameter ?.
For ? = 1/2 and ? = 1 the distribution reduces to a Lévy distribution with scale parameter c and shift parameter ?.
Note that the above three distributions are also connected, in the following way: A standard Cauchy random variable can be viewed as a mixture of Gaussian random variables (all with mean zero), with the variance being drawn from a standard Lévy distribution. And in fact this is a special case of a more general theorem (See p. 59 of ) which allows any symmetric alpha-stable distribution to be viewed in this way (with the alpha parameter of the mixture distribution equal to twice the alpha parameter of the mixing distribution--and the beta parameter of the mixing distribution always equal to one).
A general closed form expression for stable PDF's with rational values of ? is available in terms of Meijer G-functions. Fox H-Functions can also be used to express the stable probability density functions. For simple rational numbers, the closed form expression is often in terms of less complicated special functions. Several closed form expressions having rather simple expressions in terms of special functions are available. In the table below, PDF's expressible by elementary functions are indicated by an E and those that are expressible by special functions are indicated by an s.
where . Reversing the order of integration and summation, and carrying out the integration yields:
which will be valid for x ? ? and will converge for appropriate values of the parameters. (Note that the n = 0 term which yields a delta function in x-? has therefore been dropped.) Expressing the first exponential as a series will yield another series in positive powers of x-? which is generally less useful.
For one-sided stable distribution, the above series expansion needs to be modified, since and . There is no real part to sum. Instead, the integral of the characteristic function should be carried out on the negative axis, which yields:
Simulation of stable variables
Simulating sequences of stable random variables is not straightforward, since there are no analytic expressions for the inverse nor the CDF itself. All standard approaches like the rejection or the inversion methods would require tedious computations. A much more elegant and efficient solution was proposed by Chambers, Mallows and Stuck (CMS), who noticed that a certain integral formula yielded the following algorithm:
generate a random variable uniformly distributed on and an independent exponential random variable with mean 1;
This algorithm yields a random variable . For a detailed proof see.
Given the formulas for simulation of a standard stable random variable, we can easily simulate a stable random variable for all admissible values of the parameters , , and using the following property. If then
is . For (and ) the CMS method reduces to the well known Box-Muller transform for generating Gaussian random variables. Many other approaches have been proposed in the literature, including application of Bergström and LePage series expansions, see  and, respectively. However, the CMS method is regarded as the fastest and the most accurate.
Stable distributions owe their importance in both theory and practice to the generalization of the central limit theorem to random variables without second (and possibly first) order moments and the accompanying self-similarity of the stable family. It was the seeming departure from normality along with the demand for a self-similar model for financial data (i.e. the shape of the distribution for yearly asset price changes should resemble that of the constituent daily or monthly price changes) that led Benoît Mandelbrot to propose that cotton prices follow an alpha-stable distribution with ? equal to 1.7.Lévy distributions are frequently found in analysis of critical behavior and financial data.
The Lévy distribution of solar flare waiting time events (time between flare events) was demonstrated for CGRO BATSE hard x-ray solar flares in December 2001. Analysis of the Lévy statistical signature revealed that two different memory signatures were evident; one related to the solar cycle and the second whose origin appears to be associated with a localized or combination of localized solar active region effects.
Other analytic cases
A number of cases of analytically expressible stable distributions are known. Let the stable distribution be expressed by then we know:
The STABLE program for Windows is available from John Nolan's stable webpage: http://academic2.american.edu/~jpnolan/stable/stable.html. It calculates the density (pdf), cumulative distribution function (cdf) and quantiles for a general stable distribution, and performs maximum likelihood estimation of stable parameters and some exploratory data analysis techniques for assessing the fit of a data set.
libstable is a C implementation for the Stable distribution pdf, cdf, random number, quantile and fitting functions (along with a benchmark replication package and an R package).
R Package 'stabledist' by Diethelm Wuertz, Martin Maechler and Rmetrics core team members. Computes stable density, probability, quantiles, and random numbers. Updated Sept. 12, 2016.
^ abcVoit, Johannes (2005). Balian, R; Beiglböck, W; Grosse, H; Thirring, W (eds.). The Statistical Mechanics of Financial Markets - Springer. Texts and Monographs in Physics. Springer. doi:10.1007/b137351. ISBN978-3-540-26285-5.
^Janicki, Aleksander; Kokoszka, Piotr (1992). "Computer investigation of the Rate of Convergence of Lepage Type Series to ?-Stable Random Variables". Statistics. 23 (4): 365-373. doi:10.1080/02331889208802383. ISSN0233-1888.
^Uchaikin, V. V.; Zolotarev, V. M. (1999). "Chance And Stability - Stable Distributions And Their Applications". VSP.
^Zlotarev, V. M. (1961). "Expression of the density of a stable distribution with exponent alpha greater than one by means of a frequency with exponent 1/alpha". Selected Translations in Mathematical Statistics and Probability (Translated from the Russian Article: Dokl. Akad. Nauk SSSR. 98, 735-738 (1954)). 1: 163-167.