The reflectance of the surface of a material is its effectiveness in reflecting radiant energy. It is the fraction of incident electromagnetic power that is reflected at the boundary. Reflectance is a component of the response of the electronic structure of the material to the electromagnetic field of light, and is in general a function of the frequency, or wavelength, of the light, its polarization, and the angle of incidence. The dependence of reflectance on the wavelength is called a reflectance spectrum or spectral reflectance curve.
The hemispherical reflectance of a surface, denoted R, is defined as^{[1]}
where ?_{e}^{r} is the radiant flux reflected by that surface and ?_{e}^{i} is the radiant flux received by that surface.
The spectral hemispherical reflectance in frequency and spectral hemispherical reflectance in wavelength of a surface, denoted R_{?} and R_{?} respectively, are defined as^{[1]}
where
The directional reflectance of a surface, denoted R_{?}, is defined as^{[1]}
where
The spectral directional reflectance in frequency and spectral directional reflectance in wavelength of a surface, denoted R_{?,?} and R_{?,?} respectively, are defined as^{[1]}
where
For homogeneous and semi-infinite (see halfspace) materials, reflectivity is the same as reflectance. Reflectivity is the square of the magnitude of the Fresnel reflection coefficient,^{[2]} which is the ratio of the reflected to incident electric field;^{[3]} as such the reflection coefficient can be expressed as a complex number as determined by the Fresnel equations for a single layer, whereas the reflectance is always a positive real number.
For layered and finite media, according to the CIE,^{[]} reflectivity is distinguished from reflectance by the fact that reflectivity is a value that applies to thick reflecting objects.^{[4]} When reflection occurs from thin layers of material, internal reflection effects can cause the reflectance to vary with surface thickness. Reflectivity is the limit value of reflectance as the sample becomes thick; it is the intrinsic reflectance of the surface, hence irrespective of other parameters such as the reflectance of the rear surface. Another way to interpret this is that the reflectance is the fraction of electromagnetic power reflected from a specific sample, while reflectivity is a property of the material itself, which would be measured on a perfect machine if the material filled half of all space.^{[5]}
Given that reflectance is a directional property, most surfaces can be divided into those that give specular reflection and those that give diffuse reflection.
For specular surfaces, such as glass or polished metal, reflectance is nearly zero at all angles except at the appropriate reflected angle; that is the same angle with respect to the surface normal in the plane of incidence, but on the opposing side. When the radiation is incident normal to the surface, it is reflected back into the same direction.
For diffuse surfaces, such as matte white paint, reflectance is uniform; radiation is reflected in all angles equally or near-equally. Such surfaces are said to be Lambertian.
Most practical objects exhibit a combination of diffuse and specular reflective properties.
Reflection occurs when light moves from a medium with one index of refraction into a second medium with a different index of refraction.
Specular reflection from a body of water is calculated by the Fresnel equations.^{[6]} Fresnel reflection is directional and therefore does not contribute significantly to albedo which primarily diffuses reflection.
A real water surface may be wavy. Reflectance, which assumes a flat surface as given by the Fresnel equations, can be adjusted to account for waviness.
The generalization of reflectance to a diffraction grating, which disperses light by wavelength, is called diffraction efficiency.
Quantity | Unit | Dimension | Notes | |||||
---|---|---|---|---|---|---|---|---|
Name | Symbol^{[nb 1]} | Name | Symbol | Symbol | ||||
Radiant energy | Q_{e}^{[nb 2]} | joule | J | M?L^{2}?T^{-2} | Energy of electromagnetic radiation. | |||
Radiant energy density | w_{e} | joule per cubic metre | J/m^{3} | M?L^{-1}?T^{-2} | Radiant energy per unit volume. | |||
Radiant flux | ?_{e}^{[nb 2]} | watt | W = J/s | M?L^{2}?T^{-3} | Radiant energy emitted, reflected, transmitted or received, per unit time. This is sometimes also called "radiant power". | |||
Spectral flux | ?_{e,?}^{[nb 3]} | watt per hertz | W/Hz | M?L^{2}?T^{-2} | Radiant flux per unit frequency or wavelength. The latter is commonly measured in W?nm^{-1}. | |||
?_{e,?}^{[nb 4]} | watt per metre | W/m | M?L?T^{-3} | |||||
Radiant intensity | I_{e,?}^{[nb 5]} | watt per steradian | W/sr | M?L^{2}?T^{-3} | Radiant flux emitted, reflected, transmitted or received, per unit solid angle. This is a directional quantity. | |||
Spectral intensity | I_{e,?,?}^{[nb 3]} | watt per steradian per hertz | W?sr^{-1}?Hz^{-1} | M?L^{2}?T^{-2} | Radiant intensity per unit frequency or wavelength. The latter is commonly measured in W?sr^{-1}?nm^{-1}. This is a directional quantity. | |||
I_{e,?,?}^{[nb 4]} | watt per steradian per metre | W?sr^{-1}?m^{-1} | M?L?T^{-3} | |||||
Radiance | L_{e,?}^{[nb 5]} | watt per steradian per square metre | W?sr^{-1}?m^{-2} | M?T^{-3} | Radiant flux emitted, reflected, transmitted or received by a surface, per unit solid angle per unit projected area. This is a directional quantity. This is sometimes also confusingly called "intensity". | |||
Spectral radiance | L_{e,?,?}^{[nb 3]} | watt per steradian per square metre per hertz | W?sr^{-1}?m^{-2}?Hz^{-1} | M?T^{-2} | Radiance of a surface per unit frequency or wavelength. The latter is commonly measured in W?sr^{-1}?m^{-2}?nm^{-1}. This is a directional quantity. This is sometimes also confusingly called "spectral intensity". | |||
L_{e,?,?}^{[nb 4]} | watt per steradian per square metre, per metre | W?sr^{-1}?m^{-3} | M?L^{-1}?T^{-3} | |||||
Irradiance Flux density |
E_{e}^{[nb 2]} | watt per square metre | W/m^{2} | M?T^{-3} | Radiant flux received by a surface per unit area. This is sometimes also confusingly called "intensity". | |||
Spectral irradiance Spectral flux density |
E_{e,?}^{[nb 3]} | watt per square metre per hertz | W?m^{-2}?Hz^{-1} | M?T^{-2} | Irradiance of a surface per unit frequency or wavelength. This is sometimes also confusingly called "spectral intensity". Non-SI units of spectral flux density include jansky (1 Jy = 10^{-26} W?m^{-2}?Hz^{-1}) and solar flux unit (1 sfu = 10^{-22} W?m^{-2}?Hz^{-1} = 10^{4} Jy). | |||
E_{e,?}^{[nb 4]} | watt per square metre, per metre | W/m^{3} | M?L^{-1}?T^{-3} | |||||
Radiosity | J_{e}^{[nb 2]} | watt per square metre | W/m^{2} | M?T^{-3} | Radiant flux leaving (emitted, reflected and transmitted by) a surface per unit area. This is sometimes also confusingly called "intensity". | |||
Spectral radiosity | J_{e,?}^{[nb 3]} | watt per square metre per hertz | W?m^{-2}?Hz^{-1} | M?T^{-2} | Radiosity of a surface per unit frequency or wavelength. The latter is commonly measured in W?m^{-2}?nm^{-1}. This is sometimes also confusingly called "spectral intensity". | |||
J_{e,?}^{[nb 4]} | watt per square metre, per metre | W/m^{3} | M?L^{-1}?T^{-3} | |||||
Radiant exitance | M_{e}^{[nb 2]} | watt per square metre | W/m^{2} | M?T^{-3} | Radiant flux emitted by a surface per unit area. This is the emitted component of radiosity. "Radiant emittance" is an old term for this quantity. This is sometimes also confusingly called "intensity". | |||
Spectral exitance | M_{e,?}^{[nb 3]} | watt per square metre per hertz | W?m^{-2}?Hz^{-1} | M?T^{-2} | Radiant exitance of a surface per unit frequency or wavelength. The latter is commonly measured in W?m^{-2}?nm^{-1}. "Spectral emittance" is an old term for this quantity. This is sometimes also confusingly called "spectral intensity". | |||
M_{e,?}^{[nb 4]} | watt per square metre, per metre | W/m^{3} | M?L^{-1}?T^{-3} | |||||
Radiant exposure | H_{e} | joule per square metre | J/m^{2} | M?T^{-2} | Radiant energy received by a surface per unit area, or equivalently irradiance of a surface integrated over time of irradiation. This is sometimes also called "radiant fluence". | |||
Spectral exposure | H_{e,?}^{[nb 3]} | joule per square metre per hertz | J?m^{-2}?Hz^{-1} | M?T^{-1} | Radiant exposure of a surface per unit frequency or wavelength. The latter is commonly measured in J?m^{-2}?nm^{-1}. This is sometimes also called "spectral fluence". | |||
H_{e,?}^{[nb 4]} | joule per square metre, per metre | J/m^{3} | M?L^{-1}?T^{-2} | |||||
Hemispherical emissivity | ? | N/A | 1 | Radiant exitance of a surface, divided by that of a black body at the same temperature as that surface. | ||||
Spectral hemispherical emissivity | ?_{?} or ?_{?} |
N/A | 1 | Spectral exitance of a surface, divided by that of a black body at the same temperature as that surface. | ||||
Directional emissivity | ?_{?} | N/A | 1 | Radiance emitted by a surface, divided by that emitted by a black body at the same temperature as that surface. | ||||
Spectral directional emissivity | ?_{?,?} or ?_{?,?} |
N/A | 1 | Spectral radiance emitted by a surface, divided by that of a black body at the same temperature as that surface. | ||||
Hemispherical absorptance | A | N/A | 1 | Radiant flux absorbed by a surface, divided by that received by that surface. This should not be confused with "absorbance". | ||||
Spectral hemispherical absorptance | A_{?} or A_{?} |
N/A | 1 | Spectral flux absorbed by a surface, divided by that received by that surface. This should not be confused with "spectral absorbance". | ||||
Directional absorptance | A_{?} | N/A | 1 | Radiance absorbed by a surface, divided by the radiance incident onto that surface. This should not be confused with "absorbance". | ||||
Spectral directional absorptance | A_{?,?} or A_{?,?} |
N/A | 1 | Spectral radiance absorbed by a surface, divided by the spectral radiance incident onto that surface. This should not be confused with "spectral absorbance". | ||||
Hemispherical reflectance | R | N/A | 1 | Radiant flux reflected by a surface, divided by that received by that surface. | ||||
Spectral hemispherical reflectance | R_{?} or R_{?} |
N/A | 1 | Spectral flux reflected by a surface, divided by that received by that surface. | ||||
Directional reflectance | R_{?} | N/A | 1 | Radiance reflected by a surface, divided by that received by that surface. | ||||
Spectral directional reflectance | R_{?,?} or R_{?,?} |
N/A | 1 | Spectral radiance reflected by a surface, divided by that received by that surface. | ||||
Hemispherical transmittance | T | N/A | 1 | Radiant flux transmitted by a surface, divided by that received by that surface. | ||||
Spectral hemispherical transmittance | T_{?} or T_{?} |
N/A | 1 | Spectral flux transmitted by a surface, divided by that received by that surface. | ||||
Directional transmittance | T_{?} | N/A | 1 | Radiance transmitted by a surface, divided by that received by that surface. | ||||
Spectral directional transmittance | T_{?,?} or T_{?,?} |
N/A | 1 | Spectral radiance transmitted by a surface, divided by that received by that surface. | ||||
Hemispherical attenuation coefficient | ? | reciprocal metre | m^{-1} | L^{-1} | Radiant flux absorbed and scattered by a volume per unit length, divided by that received by that volume. | |||
Spectral hemispherical attenuation coefficient | ?_{?} or ?_{?} |
reciprocal metre | m^{-1} | L^{-1} | Spectral radiant flux absorbed and scattered by a volume per unit length, divided by that received by that volume. | |||
Directional attenuation coefficient | ?_{?} | reciprocal metre | m^{-1} | L^{-1} | Radiance absorbed and scattered by a volume per unit length, divided by that received by that volume. | |||
Spectral directional attenuation coefficient | ?_{?,?} or ?_{?,?} |
reciprocal metre | m^{-1} | L^{-1} | Spectral radiance absorbed and scattered by a volume per unit length, divided by that received by that volume. | |||
See also: SI · Radiometry · Photometry |