Get Linear Canonical Transform essential facts below. View Videos or join the Linear Canonical Transform discussion. Add Linear Canonical Transform to your PopFlock.com topic list for future reference or share this resource on social media.
The basic properties of the transformations mentioned above, such as scaling, shift, coordinate multiplication are considered. Any linear canonical transformation is related to affine transformations in phase space, defined by time-frequency or position-momentum coordinates.
The LCT can be represented in several ways; most easily, it can be parameterized by a 2×2 matrix with determinant 1, i.e., an element of the special linear group SL2(C). Then for any such matrix with ad - bc = 1, the corresponding integral transform from a function to is defined as
when b ? 0,
when b = 0.
Many classical transforms are special cases of the linear canonical transform:
Composition of LCTs corresponds to multiplication of the corresponding matrices; this is also known as the "additivity property of the WDF".
In detail, if the LCT is denoted by OF(a,b,c,d), i.e.
If is the , where is the LCT of , then
LCT is equal to the twisting operation for the WDF and the Cohen's class distribution also has the twisting operation.
We can freely use the LCT to transform the parallelogram whose center is at (0,0) to another parallelogram which has the same same area and the same center
From this picture we know that the point (-1,2) transform to the point (0,1) and the point (1,2) transform to the point (4,3). As the result, we can write down the equations below
we can solve the equations and get (a,b,c,d) is equal to (2,1,1,1)
From the following picture, we summarize the LCT with other transform or properties
In optics and quantum mechanics
Paraxial optical systems implemented entirely with thin lenses and propagation through free space and/or graded index (GRIN) media, are quadratic phase systems (QPS); these were known before Moshinsky and Quesne (1974) called attention to their significance in connection with canonical transformations in quantum mechanics. The effect of any arbitrary QPS on an input wavefield can be described using the linear canonical transform, a particular case of which was developed by Segal (1963) and Bargmann (1961) in order to formalize Fock's (1928) boson calculus.
It was shown that linear canonical transformations in quantum theory can be defined as the linear transformations mixing the momentum and position operators and leaving invariant the Canonical commutation relations
Canonical transforms are used to analyze differential equations. These include diffusion, the Schrödinger free particle, the linear potential (free-fall), and the attractive and repulsive oscillator equations. It also includes a few others such as the Fokker-Planck equation. Although this class is far from universal, the ease with which solutions and properties are found makes canonical transforms an attractive tool for problems such as these.
Wave propagation through air, a lens, and between satellite dishes are discussed here. All of the computations can be reduced to 2×2 matrix algebra. This is the spirit of LCT.
Electromagnetic wave propagation
Assuming the system looks like as depicted in the figure, the wave travels from plane xi, yi to the plane of x and y.
The Fresnel transform is used to describe electromagnetic wave propagation in air:
When the travel distance (z) is larger, the shearing effect is larger.
With the lens as depicted in the figure, and the refractive index denoted as n, the result is:
with f the focal length and ? the thickness of the lens.
The distortion passing through the lens is similar to LCT, when
This is also a shearing effect: when the focal length is smaller, the shearing effect is larger.
The spherical mirror--e.g., a satellite dish--can be described as a LCT, with
This is very similar to lens, except focal length is replaced by the radius of the dish. Therefore, if the radius is smaller, the shearing effect is larger.
Joint Free space and Spherical lens
The relation between the input and output we can use LCT to represent
(1) If z1 = z2 = 2f, it is reverse real image
(2) If z1 = z2 = f, it is Fourier transform+scaling
(3) if z1=z2, it is fractional Fourier transform+scaling
In this part, we show the basic properties of LCT
Matrix of transform
With the two-dimension column vector r defined as r =, we show some basic properties (result) for the specific input below
The system considered is depicted in the figure to the right: two dishes - one being the emitter and the other one the receiver - and a signal travelling between them over a distance D.
First, for dish A (emitter), the LCT matrix looks like this:
Then, for dish B (receiver), the LCT matrix similarly becomes:
Last, for the propagation of the signal in air, the LCT matrix is:
Putting all three components together, the LCT of the system is:
^de Bruijn, N. G. (1973). "A theory of generalized functions, with applications to Wigner distribution and Weyl correspondence", Nieuw Arch. Wiskd., III. Ser., 21 205-280.
^P.R. Deshmukh & A.S. Gudadhe (2011) Convolution structure for two version of fractional Laplace transform. Journal of Science and Arts, 2(15):143-150. "Archived copy". Archived from the original on 2012-12-23. Retrieved .CS1 maint: archived copy as title (link)
S.A. Collins, "Lens-system diffraction integral written in terms of matrix optics," J. Opt. Soc. Amer.60, 1168–1177 (1970).
M. Moshinsky and C. Quesne, "Linear canonical transformations and their unitary representations," J. Math. Phys.12, 8, 1772–1783, (1971).
B.M. Hennelly and J.T. Sheridan, "Fast Numerical Algorithm for the Linear Canonical Transform", J. Opt. Soc. Am. A22, 5, 928–937 (2005).
H.M. Ozaktas, A. Koç, I. Sari, and M.A. Kutay, "Efficient computation of quadratic-phase integrals in optics", Opt. Let.31, 35–37, (2006).
Bing-Zhao Li, Ran Tao, Yue Wang, "New sampling formulae related to the linear canonical transform", Signal Processing '87', 983–990, (2007).
A. Koç, H.M. Ozaktas, C. Candan, and M.A. Kutay, "Digital computation of linear canonical transforms", IEEE Trans. Signal Process., vol. 56, no. 6, 2383-2394, (2008).
Ran Tao, Bing-Zhao Li, Yue Wang, "On sampling of bandlimited signals associated with the linear canonical transform", IEEE Transactions on Signal Processing, vol. 56, no. 11, 5454-5464, (2008).
D. Stoler, "Operator methods in Physical Optics", 26th Annual Technical Symposium. International Society for Optics and Photonics, 1982.
Tian-Zhou Xu, Bing-Zhao Li, " Linear Canonical Transform and Its Applications ", Beijing, Science Press, 2013.
Raoelina Andriambololona, R. T. Ranaivoson, H.D.E Randriamisy, R. Hanitriarivo, "Dispersion Operators Algebra and Linear Canonical Transformations", arXiv:1608.02268 [quant-ph], International Journal of Theoretical Physics, Volume 56, Issue 4, pp 1258-1273, Springer, 2017
R.T. Ranaivoson, Raoelina Andriambololona, R. Hanitriarivo, "Properties of Elementary Fermions of the Standard Model deduced from Linear Canonical Transformations",arXiv:1806.07228 [physics.gen-ph], 2018.
Tatiana Alieva., Martin J. Bastiaans. (2016) The Linear Canonical Transformations: Definition and Properties. In: Healy J., Alper Kutay M., Ozaktas H., Sheridan J. (eds) Linear Canonical Transforms. Springer Series in Optical Sciences, vol 198. Springer, New York, NY