In still photography, Kodak's Kodacolor brand has been associated with various color negative films (i.e., films that produce negatives for making color prints on paper) since 1942. Kodak claims that Kodacolor was "the world's first true color negative film". More accurately, it was the first color negative film intended for making paper prints: in 1939, Agfa had introduced a 35 mm Agfacolor negative film for use by the German motion picture industry, in which the negative was used only for making positive projection prints on 35 mm film. There have been several varieties of Kodacolor negative film, including Kodacolor-X, Kodacolor VR and Kodacolor Gold.
|Process||proprietary, later known as C-22|
|Format||120, 620, 116, 616, 127, 35 mm, 122|
When introduced, Kodacolor was sold with the cost of processing the film included, but prints were ordered separately. Both the film and processing procedures were revised through the years. The speed was increased to 32/16° in the 1950s.
After Kodak lost its anti-trust case in 1954, starting in 1955 processing was no longer included in the price of Kodacolor. Kodak made the processing information (by then C-22 process) and chemicals available to other film processing labs.
While Kodacolor film was normally daylight balanced, for a while starting in 1956  it was balanced in-between daylight and tungsten, to allow use indoors, or with clear flash bulbs. This film used the prefix CU. This was not a great success, and the film returned to daylight balance a few years later.
Kodacolor was also available in Type A, balanced for 3400K photolamps. A suffix of A on the type number indicated Type A, such as C828A.
|Speed||64/19° (early) 80/20° (late)|
|Format||35 mm, 120, 620, 116, 616, 126, 127, 828|
Only a few specialty labs still process this film, due to the length of discontinuation. Surviving exposed (but unprocessed) Kodacolor-X and C-22 films can still yield color images, although this requires highly specialised development techniques.
|Speed||80/20° (1972-75) 100/21° (1975-?)|
|Format||110, 35 mm, 120, 620, 116, 616, 126, 127, 828|
Kodacolor-II was the first of a new generation of Kodak color negative films using the C-41 process. It was designed as a major improvement to meet the needs of the small 13×17 mm negatives used in 110 film for the Kodak Pocket Instamatic cameras.
The film was initially released in 1972 in the 110 size only, so that non-Kodak processing labs would have time to set up lines using the C-41 process. The other sizes were released in 1973.
Kodacolor 400 was available by 1977. It offered a major speed increase over Kodacolor II.
Kodacolor HR was only available in the Disc format. It was Kodak's first color negative film to use their T-Grain technology. The T-Grain technology offered significant reduction in film grain, which was required for the very small 8×11 mm negatives used in the Kodak Disc cameras and film introduced in the same year.
|Kodacolor VR 1000 (CF)|
|Kodacolor VR 100 (CP)|
|Format||35 mm, 120, 110|
The Kodacolor VR films were also Kodak's first to use developer-inhibitor-releaser, which improved edge effects for higher sharpness.
|Kodacolor VR 200 (CL)|
|Format||35 mm, 120, 620, 127, 126, Disc|
Kodacolor VR 200 used T-Grain technology. It was also available in the Disc film format (CVR).
|Kodacolor VR 400 (CM)|
|Format||35 mm, 120|
Kodacolor VR 400 uses T-Grain technology.
Kodacolor VR-G 100 was later sold as Kodacolor Gold 100.
|Kodacolor VR-G 200 (CB)|
|Format||35 mm, 120, 127, 126|
Kodacolor VR-G 200 was later sold as Kodacolor Gold 200.
Kodacolor VR-G 400 was later sold as Kodacolor Gold 400.
Companies processing films requiring Process C-22: