Get Gauss's Theorem essential facts below. View Videos or join the Gauss's Theorem discussion. Add Gauss's Theorem to your PopFlock.com topic list for future reference or share this resource on social media.
Theorem in calculus which relates the flux of closed surfaces to divergence over their volume
More precisely, the divergence theorem states that the surface integral of a vector field over a closed surface, which is called the flux through the surface, is equal to the volume integral of the divergence over the region inside the surface. Intuitively, it states that the sum of all sources of the field in a region (with sinks regarded as negative sources) gives the net flux out of the region.
Vector fields are often illustrated using the example of the velocity field of a fluid, such as a gas or liquid. A moving liquid has a velocity--a speed and a direction--at each point, which can be represented by a vector, so that the velocity of the liquid forms a vector field. Consider an imaginary closed surface S inside a body of liquid, enclosing a volume of liquid. The flux of liquid out of the volume is equal to the volume rate of fluid crossing this surface, i.e., the surface integral of the velocity over the surface.
Since liquids are incompressible, the amount of liquid inside a closed volume is constant; if there are no sources or sinks inside the volume then the flux of liquid out of S is zero. If the liquid is moving, it may flow into the volume at some points on the surface S and out of the volume at other points, but the amounts flowing in and out at any moment are equal, so the net flux of liquid out of the volume is zero.
However if a source of liquid is inside the closed surface, such as a pipe through which liquid is introduced, the additional liquid will exert pressure on the surrounding liquid, causing an outward flow in all directions. This will cause a net outward flow through the surface S. The flux outward through S equals the volume rate of flow of fluid into S from the pipe. Similarly if there is a sink or drain inside S, such as a pipe which drains the liquid off, the external pressure of the liquid will cause a velocity throughout the liquid directed inward toward the location of the drain. The volume rate of flow of liquid inward through the surface S equals the rate of liquid removed by the sink.
If there are multiple sources and sinks of liquid inside S, the flux through the surface can be calculated by adding up the volume rate of liquid added by the sources and subtracting the rate of liquid drained off by the sinks. The volume rate of flow of liquid through a source or sink (with the flow through a sink given a negative sign) is equal to the divergence of the velocity field at the pipe mouth, so adding up (integrating) the divergence of the liquid throughout the volume enclosed by S equals the volume rate of flux through S. This is the divergence theorem.
The divergence theorem is employed in any conservation law which states that the total volume of all sinks and sources, that is the volume integral of the divergence, is equal to the net flow across the volume's boundary.
A region V bounded by the surface S = ?V with the surface normal n
The left side is a volume integral over the volume V, the right side is the surface integral over the boundary of the volume V. The closed manifold ?V is oriented by outward-pointing normals, and n is the outward pointing unit normal at each point on the boundary ?V. (dS may be used as a shorthand for ndS.) In terms of the intuitive description above, the left-hand side of the equation represents the total of the sources in the volume V, and the right-hand side represents the total flow across the boundary S.
The divergence theorem follows from the fact that if a volume V is partitioned into separate parts, the flux out of the original volume is equal to the sum of the flux out of each component volume. This is true despite the fact that the new subvolumes have surfaces that were not part of the original volume's surface, because these surfaces are just partitions between two of the subvolumes and the flux through them just passes from one volume to the other and so cancels out when the flux out of the subvolumes is summed.
A volume divided into two subvolumes. At right the two subvolumes are separated to show the flux out of the different surfaces.
See the diagram. A closed, bounded volume V is divided into two volumes V1 and V2 by a surface S3(green). The flux ?(Vi) out of each component region Vi is equal to the sum of the flux through its two faces, so the sum of the flux out of the two parts is
where ?1 and ?2 are the flux out of surfaces S1 and S2, ?31 is the flux through S3 out of volume 1, and ?32 is the flux through S3 out of volume 2. The point is that surface S3 is part of the surface of both volumes. The "outward" direction of the normal vector is opposite for each volume, so the flux out of one through S3 is equal to the negative of the flux out of the other
so these two fluxes cancel in the sum. Therefore
Since the union of surfaces S1 and S2 is S
The volume can be divided into any number of subvolumes and the flux out of V is equal to the sum of the flux out of each subvolume, because the flux through the green surfaces cancels out in the sum. In (b) the volumes are shown separated slightly, illustrating that each green partition is part of the boundary of two adjacent volumes
This principle applies to a volume divided into any number of parts, as shown in the diagram. Since the integral over each internal partition (green surfaces) appears with opposite signs in the flux of the two adjacent volumes they cancel out, and the only contribution to the flux is the integral over the external surfaces (grey). Since the external surfaces of all the component volumes equal the original surface.
As the volume is subdivided into smaller parts, the ratio of the flux out of each volume to the volume approaches
The flux ? out of each volume is the surface integral of the vector field F(x) over the surface
The goal is to divide the original volume into infinitely many infinitesimal volumes. As the volume is divided into smaller and smaller parts, the surface integral on the right, the flux out of each subvolume, approaches zero because the surface area S(Vi) approaches zero. However, from the definition of divergence, the ratio of flux to volume, , the part in parentheses below, does not in general vanish but approaches the divergencediv F as the volume approaches zero.
As long as the vector field F(x) has continuous derivatives, the sum above holds even in the limit when the volume is divided into infinitely small increments
As approaches zero volume, it becomes the infinitesimal dV, the part in parentheses becomes the divergence, and the sum becomes a volume integral over V
Since this derivation is coordinate free, it shows that the divergence does not depend on the coordinates used.
By replacing F in the divergence theorem with specific forms, other useful identities can be derived (cf. vector identities).
With for a scalar function g and a vector field F,
A special case of this is F = ? f, in which case the theorem is the basis for Green's identities.
With for two vector fields F and G, where denotes a cross product,
With for two vector fields F and G, where denotes a dot product,
With for a scalar function f and vector field c:
The last term on the right vanishes for constant or any divergence free (solenoidal) vector field, e.g. Incompressible flows without sources or sinks such as phase change or chemical reactions etc. In particular, taking to be constant:
By reordering the triple product on the right hand side and taking out the constant vector of the integral,
The vector field corresponding to the example shown. Vectors may point into or out of the sphere.
The divergence theorem can be used to calculate a flux through a closed surface that fully encloses a volume, like any of the surfaces on the left. It can not directly be used to calculate the flux through surfaces with boundaries, like those on the right. (Surfaces are blue, boundaries are red.)
The direct computation of this integral is quite difficult, but we can simplify the derivation of the result using the divergence theorem, because the divergence theorem says that the integral is equal to:
where W is the unit ball:
Since the function y is positive in one hemisphere of W and negative in the other, in an equal and opposite way, its total integral over W is zero. The same is true for z:
Differential form and integral form of physical laws
As a result of the divergence theorem, a host of physical laws can be written in both a differential form (where one quantity is the divergence of another) and an integral form (where the flux of one quantity through a closed surface is equal to another quantity). Three examples are Gauss's law (in electrostatics), Gauss's law for magnetism, and Gauss's law for gravity.
Continuity equations offer more examples of laws with both differential and integral forms, related to each other by the divergence theorem. In fluid dynamics, electromagnetism, quantum mechanics, relativity theory, and a number of other fields, there are continuity equations that describe the conservation of mass, momentum, energy, probability, or other quantities. Generically, these equations state that the divergence of the flow of the conserved quantity is equal to the distribution of sources or sinks of that quantity. The divergence theorem states that any such continuity equation can be written in a differential form (in terms of a divergence) and an integral form (in terms of a flux).
Joseph-Louis Lagrange introduced the notion of surface integrals in 1760 and again in more general terms in 1811, in the second edition of his Méchanique Analytique. Lagrange employed surface integrals in his work on fluid mechanics. He discovered the divergence theorem in 1762.
Carl Friedrich Gauss was also using surface integrals while working on the gravitational attraction of an elliptical spheroid in 1813, when he proved special cases of the divergence theorem. He proved additional special cases in 1833 and 1839. But it was Mikhail Ostrogradsky, who gave the first proof of the general theorem, in 1826, as part of his investigation of heat flow. Special cases were proven by George Green in 1828 in An Essay on the Application of Mathematical Analysis to the Theories of Electricity and Magnetism,Siméon Denis Poisson in 1824 in a paper on elasticity, and Frédéric Sarrus in 1828 in his work on floating bodies.
To verify the planar variant of the divergence theorem for a region :
and the vector field:
The boundary of is the unit circle, , that can be represented parametrically by:
such that where units is the length arc from the point to the point on . Then a vector equation of is
At a point on :
Because , and because . Thus
Let's say we wanted to evaluate the flux of the following vector field defined by bounded by the following inequalities:
By the divergence theorem,
We now need to determine the divergence of . If is a three-dimensional vector field, then the divergence of is given by .
Thus, we can set up the following the flux integral
Now that we have set up the integral, we can evaluate it.
One can use the general Stokes' Theorem to equate the n-dimensional volume integral of the divergence of a vector field F over a region U to the (n - 1)-dimensional surface integral of F over the boundary of U:
This equation is also known as the divergence theorem.
suggestively, replacing the vector field F with a rank-n tensor field T, this can be generalized to:
where on each side, tensor contraction occurs for at least one index. This form of the theorem is still in 3d, each index takes values 1, 2, and 3. It can be generalized further still to higher (or lower) dimensions (for example to 4d spacetime in general relativity).
^ abKatz, Victor (2009). "Chapter 22: Vector Analysis". A History of Mathematics: An Introduction. Addison-Wesley. pp. 808-9. ISBN978-0-321-38700-4.
^In his 1762 paper on sound, Lagrange treats a special case of the divergence theorem: Lagrange (1762) "Nouvelles recherches sur la nature et la propagation du son" (New researches on the nature and propagation of sound), Miscellanea Taurinensia (also known as: Mélanges de Turin ), 2: 11 - 172. This article is reprinted as: "Nouvelles recherches sur la nature et la propagation du son" in: J.A. Serret, ed., Oeuvres de Lagrange, (Paris, France: Gauthier-Villars, 1867), vol. 1, pages 151-316; on pages 263-265, Lagrange transforms triple integrals into double integrals using integration by parts.
^Mikhail Ostragradsky presented his proof of the divergence theorem to the Paris Academy in 1826; however, his work was not published by the Academy. He returned to St. Petersburg, Russia, where in 1828-1829 he read the work that he'd done in France, to the St. Petersburg Academy, which published his work in abbreviated form in 1831.
His proof of the divergence theorem - "Démonstration d'un théorème du calcul intégral" (Proof of a theorem in integral calculus) - which he had read to the Paris Academy on February 13, 1826, was translated, in 1965, into Russian together with another article by him. See: ? ?.?. (Yushkevich A.P.) and ?.?. (Antropov V.I.) (1965) "? ?.?. " (Unpublished works of MV Ostrogradskii), - (Istoriko-Matematicheskie Issledovaniya / Historical-Mathematical Studies), 16: 49-96; see the section titled: "? ?.?. ? ? ?" (Ostrogradskii M. V. Dokazatelstvo odnoy teoremy integralnogo ischislenia / Ostragradsky M.V. Proof of a theorem in integral calculus).
M. Ostrogradsky (presented: November 5, 1828 ; published: 1831) "Première note sur la théorie de la chaleur" (First note on the theory of heat) Mémoires de l'Académie impériale des sciences de St. Pétersbourg, series 6, 1: 129-133; for an abbreviated version of his proof of the divergence theorem, see pages 130-131.
^George Green, An Essay on the Application of Mathematical Analysis to the Theories of Electricity and Magnetism (Nottingham, England: T. Wheelhouse, 1838). A form of the "divergence theorem" appears on pages 10-12.
^Other early investigators who used some form of the divergence theorem include:
Poisson (presented: February 2, 1824 ; published: 1826) "Mémoire sur la théorie du magnétisme" (Memoir on the theory of magnetism), Mémoires de l'Académie des sciences de l'Institut de France, 5: 247-338; on pages 294-296, Poisson transforms a volume integral (which is used to evaluate a quantity Q) into a surface integral. To make this transformation, Poisson follows the same procedure that is used to prove the divergence theorem.
Frédéric Sarrus (1828) "Mémoire sur les oscillations des corps flottans" (Memoir on the oscillations of floating bodies), Annales de mathématiques pures et appliquées (Nismes), 19: 185-211.