Energy density is the amount of energy stored in a given system or region of space per unit volume. Colloquially it may also be used for energy per unit mass, though the accurate term for this is specific energy. Often only the useful or extractable energy is measured, which is to say that inaccessible energy (such as rest mass energy) is ignored. In cosmological and other general relativistic contexts, however, the energy densities considered are those that correspond to the elements of the stress-energy tensor and therefore do include mass energy as well as energy densities associated with the pressures described in the next paragraph.
Energy per unit volume has the same physical units as pressure, and in many circumstances is a synonym: for example, the energy density of a magnetic field may be expressed as (and behaves as) a physical pressure, and the energy required to compress a compressed gas a little more may be determined by multiplying the difference between the gas pressure and the external pressure by the change in volume. In short, pressure is a measure of the enthalpy per unit volume of a system. A pressure gradient has the potential to perform work on the surroundings by converting enthalpy to work until equilibrium is reached.
There are different types of energy stored in materials, and it takes a particular type of reaction to release each type of energy. In order of the typical magnitude of the energy released, these types of reactions are: nuclear, chemical, electrochemical, and electrical.
Nuclear reactions take place in stars and nuclear power plants, both of which derive energy from the binding energy of nuclei. Chemical reactions are used by animals to derive energy from food, and by automobiles to derive energy from gasoline. Liquid hydrocarbons (fuels such as gasoline, diesel and kerosene) are today the most dense way known to economically store and transport chemical energy at a very large scale (1 kg of diesel fuel burns with the oxygen contained in ~15 kg of air). Electrochemical reactions are used by most mobile devices such as laptop computers and mobile phones to release the energy from batteries.
There are several different types of energy content. One is the theoretical total amount of thermodynamic work that can be derived from a system, with a given temperature and pressure for the surroundings. This is called exergy. Another is the theoretical amount of work that can be derived from reactants that are initially at room temperature and atmospheric pressure. This is given by the change in standard Gibbs free energy. But as a source of heat or for use in a heat engine, the relevant quantity is the change in standard enthalpy or the heat of combustion.
There are two kinds of heat of combustion:
A convenient table of HHV and LHV of some fuels can be found in the references.
In energy storage applications the energy density relates the energy in an energy store to the volume of the storage facility, e.g. the fuel tank. The higher the energy density of the fuel, the more energy may be stored or transported for the same amount of volume. The energy density of a fuel per unit mass is called the specific energy of that fuel. In general an engine using that fuel will generate less kinetic energy due to inefficiencies and thermodynamic considerations--hence the specific fuel consumption of an engine will always be greater than its rate of production of the kinetic energy of motion.
Energy density differs from energy conversion efficiency (net output per input) or embodied energy (the energy output costs to provide, as harvesting, refining, distributing, and dealing with pollution all use energy). Large scale, intensive energy use impacts and is impacted by climate, waste storage, and environmental consequences.
No single energy storage method boasts the best in specific power, specific energy, and energy density. Peukert's law describes how the amount of useful energy that can be obtained (for a lead-acid cell) depends on how quickly it is pulled out. To maximize both specific energy and energy density, one can compute the specific energy density of a substance by multiplying the two values together, where the higher the number, the better the substance is at storing energy efficiently.
This article or section appears to contradict itself.April 2019)(
Some of this section's listed sources may not be reliable. (February 2020) (Learn how and when to remove this template message)
Unless otherwise stated, the values in the following table are lower heating values for perfect combustion not counting oxidizer mass or volume. The following unit conversions may be helpful when considering the data in the table: 3.6 MJ = 1 kW?h ? 1.34 hp?h.
|Storage type||Specific energy
|How energy is released and Comments|
|Antimatter||89,875,517,874||Depends on the density of the antimatter's form||24,965,421,631,578||Depends on the density of the antimatter's form||Annihilation, counting both the consumed antimatter mass and ordinary matter mass|
||579,000,000||104,000||161,000,000,000||28,900,000,000||Fusion reactor (Experimental)|
|Plutonium-239||83,610,000||1,300,000,000-1,700,000,000 (Depends on crystallographic phase)||23,222,915,000||370,000,000,000-460,000,000,000 (Depends on crystallographic phase)||Electricity produced in Fission reactor|
|Plutonium-239||31,000,000||490,000,000-620,000,000 (Depends on crystallographic phase)||8,700,000,000||140,000,000,000-170,000,000,000 (Depends on crystallographic phase)||Electricity produced in Fission reactor|
|Uranium||80,620,000||1,539,842,000||22,394,000,000||Electricity produced in breeder reactor|
|Thorium||79,420,000||929,214,000||22,061,000,000||Breeder reactor (Experimental)|
|Hydrogen, liquid||141.86 (HHV)
|Energy figures apply after reheating to 25°C.|
|Hydrogen, at 690 bar and 25°C||141.86 (HHV)
|Hydrogen, gas, 1 atm, 25°C||141.86 (HHV)
|Methane (1.013 bar, 15 °C)||55.6||0.0378||15,444.5||10.5|
|LNG (NG at -160 °C)||53.6||22.2||14,888.9||6,166.7|
|CNG (NG compressed to 250 bar/~3,600 psi)||53.6||9||14,888.9||2,500.0|
|Gasoline (petrol)||46.4||34.2||12,888.9||9,500.0||Combusted inside Internal combustion engines. 20 to 40% thermal efficiency.|
|Residential heating oil||46.2||37.3||12,833.3||10,361.1|
|Diesel fuel||45.6||38.6||12,666.7||10,722.2||Combusted inside Internal combustion engines. 25 to 40% thermal efficiency.|
|Jet fuel||43||35||Aircraft engine|
|Gasohol E10 (10% ethanol 90% gasoline by volume)||43.54||33.18||12,094.5||9,216.7|
|Biodiesel oil (vegetable oil)||42.20||33||11,722.2||9,166.7|
|DMF (2,5-dimethylfuran)[clarification needed]||42||37.8||11,666.7||10,500.0|
|Crude oil (according to the definition of tonne of oil equivalent)||41.868||37||11,630||10,278|
|Body fat||38||35||10,555.6||9,722.2||Metabolism in human body (22% Efficiency)|
|Gasohol E85 (85% ethanol 15% gasoline by volume)||33.1||25.65||9,194.5||7,125.0|
|Coal, anthracite||26-33||34-43||7,222.2-9,166.7||9,444.5-11,944.5||Figures represent perfect combustion not counting oxidizer, but efficiency of conversion to electricity is ~36%|
|Silicon||1.790||4.5||500||1,285||Energy stored through solid to liquid phase change of silicon|
|PET plastic (impure)||23.5||6,527.8|
|Hydrazine (combusted to N2+H2O)||19.5||19.3||5,416.7||5,361.1|
|Liquid ammonia (combusted to N2+H2O)||18.6||11.5||5,166.7||3,194.5|
|PVC plastic (improper combustion toxic)[clarification needed]||18.0||25.2||5,000.0||7,000.0|
|Sugars, carbohydrates, and protein||17||26.2 (dextrose)||4,722.2||7,277.8||Metabolism in human body (22% Efficiency)|
|Dry cow dung and camel dung||15.5||4,305.6|
|Sodium||13.3||12.8||3,694.5||3,555.6||burned to wet sodium hydroxide|
|Sulfur||9.23||19.11||2,563.9||5,308.3||burned to sulfur dioxide|
|Sodium||9.1||8.8||2,527.8||2,444.5||burned to dry sodium oxide|
|Battery, lithium-air rechargeable||9.0||2,500.0||Controlled electric discharge|
|Iron||5.2||40.68||1,444.5||11,300.0||burned to iron(III) oxide|
|Teflon plastic||5.1||11.2||1,416.7||3,111.1||combustion toxic, but flame retardant|
|Iron||4.9||38.2||1,361.1||10,611.1||burned to iron(II) oxide|
|Battery, zinc-air||1.59||6.02||441.7||1,672.2||Controlled electric discharge|
|Liquid nitrogen||0.77||0.62||213.9||172.2||Maximum reversible work at 77.4K with 300K reservoir|
|Sodium sulfur battery||0.54-0.86||150-240|
|Compressed air at 300 bar||0.5||0.2||138.9||55.6||Potential energy|
|Latent heat of fusion of ice (thermal)||0.335||0.335||93.1||93.1|
|Lithium metal battery||1.8||4.32||Controlled electric discharge|
|Lithium-ion battery||0.36-0.875||0.9-2.63||100.00-243.06||250.00-730.56||Controlled electric discharge|
|Alkaline battery||0.48||1.3||Controlled electric discharge|
|Nickel-metal hydride battery||0.41||0.504-1.46||Controlled electric discharge|
|Lead-acid battery||0.17||0.56||Controlled electric discharge|
|Supercapacitor (EDLC)||0.01-0.030||0.006-0.06||up to 8.57||Controlled electric discharge|
|Water at 100 m dam height||0.000981||0.000978||0.272||0.272||Figures represent potential energy, but efficiency of conversion to electricity is 85-90%|
|Electrolytic capacitor||0.00001-0.0002||0.00001-0.001||Controlled electric discharge|
|Storage type||Energy density by mass (MJ/kg)||Energy density by volume (MJ/L)||Specific energy (W?h/kg)||Energy density (W?h/L)||How energy is released and Comments|
The mechanical energy storage capacity, or resilience, of a Hookean material when it is deformed to the point of failure can be computed by calculating tensile strength times the maximum elongation dividing by two. The maximum elongation of a Hookean material can be computed by dividing stiffness of that material by its ultimate tensile strength. The following table lists these values computed using the Young's modulus as measure of stiffness:
|Material||Energy density by mass
|Resilience: Energy density by volume
|Tensile yield strength
|Steel, ASTM A228 (yield, 1 mm diameter)||1,440-1,770||11,200-13,800||7.80||210||2,170-2,410|
|Copper Beryllium 25-1/2 HT (yield)||684||5,720||8.36||131||1,224|
|ABS plastics||241-534||258-571||1.07||1.4-3.1||40 (ultimate)|
|Aluminum 7077-T8 (yield)||399||1120||2.81||71.0||400|
|Steel, stainless, 301-H (yield)||301||2,410||8.0||193||965|
|Epoxy resins||113-1810||2-3||26-85 (ultimate)|
|Douglas fir Wood||158-200||96||.481-.609||13||50 (compression)|
|Steel, Mild AISI 1018||42.4||334||7.87||205||370 (440 Ultimate)|
|Aluminum (not alloyed)||32.5||87.7||2.70||69||110 (ultimate)|
|Pine (American Eastern White, flexural)||31.8-32.8||11.1-11.5||.350||8.30-8.56 (flexural)||41.4 (flexural)|
Table on energy content of batteries:
|Storage device||Energy content
(diameter × height in mm)
|Typical volume (mL)||Energy density
by volume (MJ/L)
by mass (MJ/kg)
|Alkaline AA battery||9,360||Electrochemical||24||14.2 × 50||7.92||1.18||0.39|
|Alkaline C battery||34,416||Electrochemical||65||26 × 46||24.42||1.41||0.53|
|NiMH AA battery||9,072||Electrochemical||26||14.2 × 50||7.92||1.15||0.35|
|NiMH C battery||19,440||Electrochemical||82||26 × 46||24.42||0.80||0.24|
|Lithium-ion 18650 battery||28,800-46,800||Electrochemical||44-49||18 × 65||16.54||1.74-2.83||0.59-1.06|
The greatest energy source by far is mass itself. This energy, E = mc2, where m = ?V, ? is the mass per unit volume, V is the volume of the mass itself and c is the speed of light. This energy, however, can be released only by the processes of nuclear fission (0.1%), nuclear fusion (1%), or the annihilation of some or all of the matter in the volume V by matter-antimatter collisions (100%). Nuclear reactions cannot be realized by chemical reactions such as combustion. Although greater matter densities can be achieved, the density of a neutron star would approximate the most dense system capable of matter-antimatter annihilation possible. A black hole, although denser than a neutron star, does not have an equivalent anti-particle form, but would offer the same 100% conversion rate of mass to energy in the form of Hawking radiation. In the case of relatively small black holes (smaller than astronomical objects) the power output would be tremendous.
The highest density sources of energy aside from antimatter are fusion and fission. Fusion includes energy from the sun which will be available for billions of years (in the form of sunlight) but so far (2018), sustained fusion power production continues to be elusive.
Power from fission of uranium and thorium in nuclear power plants will be available for many decades or even centuries because of the plentiful supply of the elements on earth, though the full potential of this source can only be realised through breeder reactors, which are, apart from the BN-600 reactor, not yet used commercially.Coal, gas, and petroleum are the current primary energy sources in the U.S. but have a much lower energy density. Burning local biomass fuels supplies household energy needs (cooking fires, oil lamps, etc.) worldwide.
The density of thermal energy contained in the core of a light water reactor (PWR or BWR) of typically 1 GWe (1 000 MW electrical corresponding to ~3 000 MW thermal) is in the range of 10 to 100 MW of thermal energy per cubic meter of cooling water depending on the location considered in the system (the core itself (~30 m3), the reactor pressure vessel (~50 m3), or the whole primary circuit (~300 m3)). This represents a considerable density of energy which requires under all circumstances a continuous water flow at high velocity in order to be able to remove the heat from the core, even after an emergency shutdown of the reactor. The incapacity to cool the cores of three boiling water reactors (BWR) at Fukushima in 2011 after the tsunami and the resulting loss of the external electrical power and of the cold source was the cause of the meltdown of the three cores in only a few hours, even though the three reactors were correctly shut down just after the T?hoku earthquake. This extremely high power density distinguishes nuclear power plants (NPP's) from any thermal power plants (burning coal, fuel or gas) or any chemical plants and explains the large redundancy required to permanently control the neutron reactivity and to remove the residual heat from the core of NPP's.
where E is the electric field and B is the magnetic field. The solution will be (in SI units) in Joules per cubic metre. In the context of magnetohydrodynamics, the physics of conductive fluids, the magnetic energy density behaves like an additional pressure that adds to the gas pressure of a plasma.
In normal (linear and nondispersive) substances, the energy density (in SI units) is
In the case of absence of magnetic fields, by exploiting Fröhlich's relationships it is also possible to extend these equations to anisotropy and nonlinearity dielectrics, as well as to calculate the correlated Helmholtz free energy and entropy densities.
properly trained athlete will have efficiencies of 22 to 26%
The Higher Heating Values are 22.7, 29.7 or 31.7 MJ/kg for methanol, ethanol and DME, respectively, while gasoline contains about 45 MJ per kg.
Let ? = 0.85, signifying an 85% efficiency rating, typical of an older powerplant.