This article includes a list of general references, but it remains largely unverified because it lacks sufficient corresponding inline citations. (July 2011) (Learn how and when to remove this template message)
M-1862 Dreyse needle-gun
|Type||Bolt action rifle|
|Place of origin||Kingdom of Prussia|
|In service||1841-1876 (Kingdom of Prussia and German Empire)|
|Designer||Johann Nikolaus von Dreyse|
|Mass||4.9 kg (10.8 lb) Zündnadelgewehr M/41|
4.8 kg (10.6 lb) Zündnadelgewehr M/62
|Length||143 cm (56 in) Zündnadelgewehr M/41|
134 cm (52.8 in) Zündnadelgewehr M/62
|Barrel length||91 cm (36 in)|
|Cartridge||Acorn-shaped lead bullet in paper cartridge|
|Caliber||15.4 mm (0.61 in)|
|Action||Breech-loading bolt action|
|Rate of fire||6-12 rounds per minute|
|Muzzle velocity||305 m/s (1,000 ft/s)|
|Effective firing range||200 m (218.7 yd) (point target)|
|Maximum firing range||527 m (576.3 yd) (maximum setting on sights for M/62)|
678 m (741.5 yd) (maximum setting on sights for M/65)
|Sights||V-notch and front post iron sights|
The Dreyse needle-gun (German Zündnadelgewehr, which translates roughly as "ignition needle rifle") was a military breechloading rifle. It is famous for having been the main infantry weapon of the Prussians, who accepted it for service in 1841 as the "leichtes Perkussionsgewehr Modell 1841"("light percussion rifle Model 1841"), with the name chosen to hide the revolutionary nature of the new weapon. The name "Zündnadelgewehr"/"needle-gun" comes from its needle-like firing pin, which passed through the paper cartridge case to strike a percussion cap at the bullet base. The Dreyse rifle was also the first breech-loading rifle to use the bolt action to open and close the chamber, executed by turning and pulling a bolt handle. It has a rate of fire of about 6 rounds per minute.
The rifle was the invention of the gunsmith Johann Nikolaus von Dreyse (1787-1867) who, beginning in 1824, had conducted multiple experiments and in 1836 produced the complete needle-gun. Dreyse was ennobled in 1864.
The first types of needle-gun made by Johann Nikolaus von Dreyse were muzzle-loading, with the novelty of the weapon lying in the long needle driven by a coiled conchoidal spring which fired the internal percussion cap on the base of the sabot. It was his adoption of the bolt-action breechloading principle combined with this igniter system which gave the rifle its military potential, allowing, as it did, a much faster rate of fire.
After successful testing in 1840, the Prussian king Friedrich Wilhelm IV ordered 60,000 of the new rifles. Dreyse set up the Dreyse-Zündnadel factory in Sömmerda with the help of state loans to ramp up production. It was accepted for service in 1841 as the leichtes Perkussionsgewehr Model 1841, but only 45,000 had been produced by 1848. It was used in combat for the first time during the German revolutions of 1848-49 and proved its combat superiority in street fighting during the May Uprising in Dresden in 1849. Many German states subsequently adopted the weapon. The Sömmerda factory could not meet demand and produced only 30,000 rifles a year. Most of the Prussian infantry in the 1850s was still equipped with the obsolete 1839 Model caplock Potsdam musket, whose ballistic performance was clearly inferior to the French Minié rifle and the Austrian Lorenz rifle. The Prussian Army's low level of funding resulted in just 90 battalions being equipped with the weapon in 1855. Dreyse consented to state manufacture of the rifle to increase production. The Royal Prussian Rifle Factory at the Spandau Arsenal began production in 1853, followed by Danzig, Saarn and Erfurt. At first, the Spandau factory produced 12,000 Dreyse needle guns a year, rising to 48,000 in 1867.
The British Army evaluated the Dreyse needle gun in 1849-51. In the British trials, the Dreyse was shown to be capable of six rounds per minute, and to maintain accuracy to 800-1,200 yards (730-1,100 m). The trials suggested that the Dreyse was "too complicated and delicate" for service use. The French carabine à tige muzzle-loading rifle was judged to be a better weapon, and an improved version was adopted as the Pattern 1851 Minié-type muzzle-loading rifle.
After the Prussian army received a 25% increase in funding and was reformed by Wilhelm I, Albrecht von Roon and Helmuth von Moltke the Elder from 1859 to 1863, the Dreyse needle gun played an important role in the Austro-Prussian victory in the Second Schleswig War against Denmark in 1864. The introduction of cast steel barrels made industrial mass production of the weapon a reality in the early 1860s. The new 1862 model and the enhanced M/55 ammunition type expedited the use and widespread adoption of the weapon in the 1860s. The success of German private industry in delivering the necessary amount of armaments for the army marked the definite end of government-owned army workshops. The Prussian Army infantry was fully equipped with and could boast of 270,000 Dreyse needle guns by the outbreak of the decisive Austro-Prussian War in 1866. The employment of the needle-gun radically changed military tactics in the 19th century, as a Prussian soldier could fire five (or more) shots, even while lying on the ground, in the time that it took his Austrian muzzle-loading counterpart to reload while standing. Production was ramped up after the war against Austria and when the Franco-Prussian War broke out in 1870, the Prussian Army had 1,150,000 needle guns in its inventory. The success of the design spurred subsequent developments in firearms technology and, before the start of the Franco-Prussian War of 1870-71, the French introduced the Chassepot rifle. The Prussians won the war but the Chassepot proved superior to the needle-gun in every way.
In 1867, Romania purchased 20,000 rifles and 11,000 carbines from the Prussian government. These were used to great effect in the Romanian War of Independence.
Sometime in the late 1860s, Japan acquired an unknown number of Model 1862 rifles and bayonets. These were marked with the imperial chrysanthemum stamp. China also acquired Dreyse rifles for the modernisation of their armed forces.
The cartridge used with this rifle consisted of the paper case, the bullet, the percussion cap and the black powder charge. The 15.4 mm (0.61 in) bullet was shaped like an acorn, with the broader end forming a point, and the primer attached to its base. The bullet was held in a paper case known as a sabot, which separated from the bullet as it exited the muzzle. Between this inner lining and the outer case was the powder charge, consisting of 4.8 g (74 grains) of black powder.
The upper end of the paper case is rolled up and tied. Upon release of the trigger, the point of the needle pierces the rear of the cartridge, passes through the powder and hits the primer fixed to the base of the sabot. Thus the burn-front in the black powder charge passes from the front to the rear. This front-to-rear burn pattern minimizes the effect seen in rear-igniting cartridges where a portion of the powder at the front of the charge is forced down and out of the barrel to burn wastefully in the air as muzzle flash. It also ensures that the whole charge burns under the highest possible pressure, theoretically minimising unburnt residues. Consequently, a smaller charge can be used to obtain the same velocity as a rear-ignited charge of the same bullet calibre and weight. It also increases the handling security of the cartridge, since it is virtually impossible to set the primer off accidentally.
There was also a blank cartridge developed for the needle-gun. It was shorter and lighter than the live round, since it lacked the projectile, but was otherwise similar in construction and powder load.
British trials in 1849-51 showed that:
Its effective range was not as great as that of the Chassepot, against which it was fielded during the Franco-Prussian War. The main reason for this was that a sizable amount of gas escaped at the breech when the rifle was fired with a paper cartridge. An improved model, giving greater muzzle velocity and increased speed in loading, was introduced later, but it was replaced shortly thereafter by the Mauser Model 1871 rifle.
The placement of the primer directly behind the bullet meant the firing needle was enclosed in black powder when the gun was fired, causing stress to the pin, which could break over time and render the rifle useless until it could be replaced. Soldiers were provided with two replacement needles for that purpose. The needle could be replaced quite easily, even in the field, in under 30 seconds. Because the rifle used black powder, residue accumulated at the back of the barrel, making cleaning necessary after about 60-80 shots. This was not a large problem because the individual soldier carried fewer cartridges than that and Dreyse created an "air chamber" by having a protruding needle tube (the Chassepot also had this, but it was more likely to jam after fewer shots because of its smaller-diameter chamber). A soldier trained well before the war of 1866 had to finish field cleaning in less than 10 minutes.
|Rifle||Dreyse||Kammerlader M1849/55||Pattern 1851 Minié rifle||Fusil modèle 1866 Chassepot rifle|
|Effective range||600 m (660 yd)||1,000 m (1,100 yd)||1,460 m (1,600 yd)||1,200 m (1,300 yd) |
|Sighted to||600 m (660 yd)||1,600 m (1,750 yd)|
|Rate of fire||6 rounds/minute||6 to 8 rounds/minute (estimate, see article)||2 rounds/minute||5 rounds/minute|
6 to 7 rounds/minute
|Calibre||15.4 mm (0.61 in)||17.5 mm (0.69 in)||17.8 mm (.702 in)||11 mm (0.43 in)|
|Muzzle velocity||305 m/s (1,000 ft/s)||265-350 m/s (870-1,150 ft/s)|
|Barrel length||91 cm (35.8 in)||78 cm (30.7 in)||99.1 cm (39 in)|
|Total length||142 cm (55.9 in)||126 cm (49.6 in)|
|Loaded weight||4.7 kg (10.4 lb)||5 kg (11.0 lb)|