3D model (JSmol)
CompTox Dashboard (EPA)
|Odor||repulsive and sweet|
|Melting point||-164.85 °C (-264.73 °F; 108.30 K)|
|Boiling point||-92.49 °C (-134.48 °F; 180.66 K)|
|Vapor pressure||39.5 atm (16.6°C)|
|Tetrahedral (for boron)|
Heat capacity (C)
Std enthalpy of
|Main hazards||highly flammable, reacts with water|
|Safety data sheet||See: data page|
|GHS Signal word||Danger|
|H220, H280, H314, H318, H330, H370, H372|
|P210, P260, P264, P270, P271, P280, P284, P301+330+331, P303+361+353, P304+340, P305+351+338, P307+311, P310, P314, P320, P321, P363, P377, P381, P403, P403+233, P405, P410+403, P501|
|NFPA 704 (fire diamond)|
|38 °C (100 °F; 311 K)|
|Lethal dose or concentration (LD, LC):|
LC50 (median concentration)
|40 ppm (rat, 4 hr)|
29 ppm (mouse, 4 hr)
40-80 ppm (rat, 4 hr)
159-181 ppm (rat, 15 min)
LCLo (lowest published)
|125 ppm (dog, 2 hr)|
50 ppm (hamster, 8 hr)
|NIOSH (US health exposure limits):|
|TWA 0.1 ppm (0.1 mg/m3)|
|TWA 0.1 ppm (0.1 mg/m3)|
IDLH (Immediate danger)
Related boron compounds
|Supplementary data page|
|Refractive index (n),|
Dielectric constant (?r), etc.
|UV, IR, NMR, MS|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Diborane(6), generally known as diborane is the chemical compound consisting of boron and hydrogen with the formula B2H6. It is a colorless, pyrophoric gas with a repulsively sweet odor. Synonyms include boroethane, boron hydride, and diboron hexahydride. Diborane is a key boron compound with a variety of applications. It has attracted wide attention for its electronic structure. Its derivatives are useful reagents.
Diborane is an electron-deficient molecule which does not have enough valence electrons to form a separate two-electron bond between each pair of bonded atoms. For the eight atoms of B2H6, this would require a minimum of seven bonds and therefore fourteen valence electrons (as in ethane, C2H6), but B2H6 has only twelve valence electrons.
Instead diborane adopts a bridged structure of D2h symmetry containing four terminal and two bridging hydrogen atoms. The model determined by molecular orbital theory indicates that the bonds between boron and the terminal hydrogen atoms are conventional 2-center, 2-electron covalent bonds. The bonding between the boron atoms and the bridging hydrogen atoms is, however, different from that in molecules such as hydrocarbons. Each boron uses two electrons in bonding to the terminal hydrogen atoms, and has one valence electron remaining for additional bonding. The bridging hydrogen atoms provide one electron each. The B2H2 ring is held together by four electrons which form two 3-center 2-electron bonds. This type of bond is sometimes called a 'banana bond'. The lengths of the B-Hbridge bonds and the B-Hterminal bonds are 1.33 and 1.19 Å respectively, and this difference in the lengths of these bonds reflects the difference in their strengths, the B-Hbridge bonds being relatively weaker. The weakness of the B-Hbridge vs B-Hterminal bonds is indicated by their vibrational signatures in the infrared spectrum, being ?2100 and 2500 cm-1, respectively. The structure is isoelectronic with C2H62+, which would arise from the diprotonation of the planar molecule ethene. Diborane is one of many compounds with such unusual bonding.
Of the other elements in Group IIIA, gallium is known to form a similar compound, digallane, Ga2H6. Aluminium forms a polymeric hydride, (AlH3)n, although unstable Al2H6 has been isolated in solid hydrogen and is isostructural with diborane.
Extensive studies of diborane have led to the development of multiple syntheses. Most preparations entail reactions of hydride donors with boron halides or alkoxides. The industrial synthesis of diborane involves the reduction of BF3 by sodium hydride, lithium hydride or lithium aluminium hydride:
Similarly, oxidation of borohydride salts has been demonstrated and remains convenient for small scale preparations. For example, using iodine as an oxidizer:
Another small-scale synthesis uses potassium hydroborate and phosphoric acid as starting materials.
Diborane is a highly reactive and versatile reagent that has numerous applications. Its dominating reaction pattern involves formation of adducts with Lewis bases. Often such initial adducts proceed rapidly to give other products. It reacts with ammonia to form the diammoniate of diborane, DADB, with lesser quantities of ammonia borane depending on the conditions used. Diborane also reacts readily with alkynes to form substituted alkene products which will readily undergo further addition reactions.
As a pyrophoric substance, diborane reacts exothermically with oxygen to form boron trioxide and water, so much that it was considered as a possible rocket or ramjet propellant but discarded because back then it was too expensive and dangerous to handle:
Diborane also reacts violently with water to form hydrogen and boric acid:
Diborane also reacts with methanol to give hydrogen and trimethoxyborate ester:
Diborane and its variants are central organic synthesis reagents for hydroboration, whereby alkenes add across the B-H bonds to give trialkylboranes. Diborane is used as a reducing agent roughly complementary to the reactivity of lithium aluminium hydride. The compound readily reduces carboxylic acids to the corresponding alcohols, whereas ketones react only sluggishly.
Diborane was first synthesised in the 19th century by hydrolysis of metal borides, but it was never analysed. From 1912 to 1936, the major pioneer in the chemistry of boron hydrides, Alfred Stock, undertook his research that led to the methods for the synthesis and handling of the highly reactive, volatile, and often toxic boron hydrides. He proposed the first ethane-like structure of diborane.Electron diffraction measurements by S. H. Bauer initially appeared to support his proposed structure.
Because of a personal communication with L. Pauling (who supported the ethane-like structure), H. I. Schlessinger did not specifically discuss 3-center-2-electron bonding in his then classic review in the early 1940s. The review does, however, discuss the C2v structure in some depth, "It is to be recognized that this formulation easily accounts for many of the chemical properties of diborane..."
In 1943, Longuet-Higgins, while still an undergraduate at Oxford, was the first to explain the structure and bonding of the boron hydrides. The paper reporting the work, written with his tutor R. P. Bell, also reviews the history of the subject beginning with the work of Dilthey. Shortly afterwards, the theoretical work of Longuet-Higgins was confirmed in an infrared study of diborane by Price.  The structure was re-confirmed by electron diffraction measurement in 1951 by K. Hedberg and V. Schomaker, with the confirmation of the structure shown in the schemes on this page.
William Nunn Lipscomb, Jr. further confirmed the molecular structure of boranes using X-ray crystallography in the 1950s, and developed theories to explain its bonding. Later, he applied the same methods to related problems, including the structure of carboranes on which he directed the research of future Nobel Prize winner Roald Hoffmann. Lipscomb himself received the Nobel Prize in Chemistry in 1976 for his efforts.
Diborane has been tested as a rocket propellant. Complete combustion is strongly exothermic. However, combustion is not complete in the rocket engine, as some boron monoxide, BO, is produced. This mirrors the incomplete combustion of hydrocarbons, to produce carbon monoxide, CO.
Diborane has been used as a rubber vulcaniser, as a catalyst for hydrocarbon polymerisation, as a flame-speed accelerator, and as a doping agent for the production of semiconductors. It is also an intermediate in the production of highly pure boron for semiconductor production. It is also used to coat the walls of tokamaks to reduce the amount of heavy metal impurities in the core plasma.
The toxic effects of diborane are primarily due to its irritant properties. Short-term exposure to diborane can cause a sensation of tightness of the chest, shortness of breath, cough, and wheezing. These signs and symptoms can occur immediately or be delayed for up to 24 hours. Skin and eye irritation can also occur. Studies in animals have shown that diborane causes the same type of effects observed in humans.