|Boeing 737 Next Generation |
|The 737-800 is the most common 737NG variant|
|Role||Narrow-body jet airliner|
|Manufacturer||Boeing Commercial Airplanes|
|First flight||February 9, 1997|
|Primary users||Southwest Airlines|
|7,052 as of December 2019|
(2019 US$ million) -700: $89.1; -800: $106.1; -900ER: $112.6
|Boeing 737 Classic|
|Variants||Boeing Business Jet |
Boeing 737 AEW&C
Boeing C-40 Clipper
Boeing P-8 Poseidon
|Boeing 737 MAX|
The Boeing 737 Next Generation, commonly abbreviated as 737NG, or 737 Next Gen jet airplanes are narrow-body aircraft powered by two engines and produced by Boeing Commercial Airplanes. Launched in 1993 as the third generation derivative of the Boeing 737, it has been produced since 1997 and is an upgrade of the 737 Classic (-300/-400/-500) series.
It features a redesigned wing with a larger area, a wider wingspan, greater fuel capacity and higher maximum takeoff weights (MTOW). It is equipped with CFM International CFM56-7 series engines, a glass cockpit, and features upgraded and redesigned interior configurations. It has a longer range and larger variants than its predecessor: the series includes four models, the -600/-700/-800/-900, seating between 108 and 215 passengers. The 737NG's primary competition is with the Airbus A320 family.
As of November 30, 2019, a total of 7,092 Boeing 737NG aircraft have been ordered, of which 7,046 have been delivered, with remaining orders for the -700W, -800, and -800A variants. In December 2019, Boeing delivered its last passenger 737NG to KLM. It is superseded by the fourth generation Boeing 737 MAX.
When regular Boeing customer United Airlines bought the more technologically advanced Airbus A320 with fly-by-wire controls, this prompted Boeing to update the slower, shorter-range 737 Classic variants into the more efficient, longer New Generation variants. In 1991, Boeing initiated development of an updated series of aircraft. After working with potential customers, the 737 Next Generation (NG) program was announced on November 17, 1993.
The first NG to roll out was a 737-700, on December 8, 1996. This aircraft, the 2,843rd 737 built, first flew on February 9, 1997 with pilots Mike Hewett and Ken Higgins. The prototype 737-800 rolled out on June 30, 1997 and first flew on July 31, 1997, piloted by Jim McRoberts and again by Hewett. The smallest of the new variants, the -600 series, is identical in size to the -500, launching in December 1997 with an initial flight occurring January 22, 1998; it was granted FAA certification on August 18, 1998. The flight test program used 10 aircraft: 3 -600s, 4 -700s, and 3 -800s.
In 2004, Boeing offered a Short Field Performance package in response to the needs of Gol Transportes Aéreos, which frequently operates from restricted airports. The enhancements improve takeoff and landing performance. The optional package is available for the 737NG models and standard equipment for the 737-900ER.
In July 2008, Boeing offered Messier-Bugatti-Dowty's new carbon brakes for the Next-Gen 737s, which are intended to replace steel brakes and will reduce the weight of the brake package by 550-700 pounds (250-320 kg) depending on whether standard or high-capacity steel brakes were fitted. A weight reduction of 700 pounds (320 kg) on a 737-800 results in 0.5% reduction in fuel burn.Delta Air Lines received the first Next-Gen 737 model with this brake package, a 737-700, at the end of July 2008.
The CFM56-7B Evolution nacelle began testing in August 2009 to be used on the new 737 PIP (Performance Improvement Package) due to enter service mid-2011. This new improvement is said to shave at least 1% off the overall drag and have some weight benefits. Overall, it is claimed to have a 2% improvement on fuel burn on longer stages.
In 2005, three ex-Boeing employees filed a lawsuit on behalf of the U.S. government, claiming that dozens of 737NG contained defective structural elements supplied by airframe manufacturer Ducommun, allegations denied by Boeing. The federal judge presiding the case sided with Boeing, and a subsequent court of appeal also ruled in favor of the company. A 2010 documentary by Al Jazeera alleged that in three crashes involving 737NGs - Turkish Airlines Flight 1951, American Airlines Flight 331, and AIRES Flight 8250 - the fuselage broke up following impact with the ground because of the defective structural components that were the subject of the 2005 lawsuit. However, the accident investigations in all three cases did not highlight any link between post-impact structural failures and manufacturing issues.
During an inspection of a 737NG in 2019 that had 35,000 flights, fatigue cracks were found on a fuselage to wing attachment known as a "pickle fork", designed to last a lifetime of 90,000 flights. Boeing reported the issue to the FAA at the end of September 2019, and more planes showed similar cracking after inspection. The cracks were found in an airliner with more than 33,500 flights, when it was stripped down for conversion to freighter. Aircraft with more than 30,000 flights (15 years at 2,000 flights per year) should be inspected within one week, while those with over 22,600 flights (11 years) should be inspected within one year. The FAA Airworthiness Directive (AD) was issued on October 3, 2019. Cracking could lead to structural failure, affects the structure integrity of the aircraft and results in loss of control.[importance?]
Of the 500 first inspected aircraft, 5% (25) had cracks and were grounded; Boeing expects to repair the first aircraft in three weeks, serving as the template for the resulting Service bulletin. Of the 810 examined aircraft over 30,000 cycles, 38 had structural cracks (4.7%), leaving 1,911 737NGs over 22,600 cycles to be inspected within their next 1,000 cycles, most of the US in-service fleet of 1,930. By early November, 1,200 aircraft were inspected, with cracks on about 60 (5%). Cracks were discovered near fasteners outside the original area in four airplanes. On November 5, Boeing recommended to expand the checks to include them, to be mandated in a November 13 FAA AD. Aircraft below 30,000 cycles have to be re-inspected within within 1,000 cycles, within 60 days above. About one quarter global NG fleet of 6,300 have to be inspected.
Southwest Airlines withdrew two of its aircraft from service after finding pickle fork cracks during the inspections. Planes were also grounded by the Australian Qantas  and the Irish RyanAir  for the same reason.[importance?]
Following the uncontained engine failure of the Southwest Airlines Flight 1380 on April 17, 2018, the NTSB recommended on November 19, 2019 to redesign and retrofit its nacelle for the 6,800 airplanes in service.
Boeing was to increase 737 production from 31.5 units per month in September 2010 to 35 in January 2012 and to 38 units per month in 2013. Production rate was 42 units per month in 2014, and was planned to reach rates of 47 units per month in 2017 and 52 units per month in 2018.
In 2016, the monthly production rate was targeted to reach 57 units per month in 2019, even to the factory limit of 63 units later. A single airplane was then produced in the Boeing Renton Factory in 10 days, less than half what it was a few years before. The empty fuselage from Spirit AeroSystems in Wichita, Kansas, enters the plant on Day 1. Electrical wiring is installed on Day 2 and hydraulic machinery on Day 3. On Day 4 the fuselage is crane-lifted and rotated 90 degrees, wings are mated to the airplane in a six-hour process, along with landing gear, and the airplane is again rotated 90°. The final assembly process begins on Day 6 with the installation of airline seats, galleys, lavatories, overhead bins, etc. Engines are attached on Day 8 and it rolls out of the factory for test flights on Day 10.
On December 18, 2019, Boeing delivered its last built passenger 737NG to KLM, though outstanding deliveries of military variants remained. By the end of December 2019, Boeing was still listing four 737-800 aircraft in its backlog, though these may correspond to orders that will never be delivered due to "additional criteria for recognizing contracted backlog with customers beyond the existence of a firm contract".
From 2006, Boeing discussed replacing the 737 with a "clean sheet" design (internally named "Boeing Y1") that could follow the Boeing 787 Dreamliner. A decision on this replacement was postponed, and delayed into 2011.
In 2011, Boeing launched the 737 MAX, an updated and re-engined version of the 737NG with more efficient CFM International LEAP-1B engines, and aerodynamic changes with distinctive split-tip winglets. The first 737 MAX performed its first flight in January 2016. The fourth generation 737 MAX supersedes the third generation 737NG.
The wing was redesigned with a new thinner airfoil section, greater chord, increased wing span by 16 ft (4.9 m) and area by 25%, which increased total fuel capacity by 30%. New quieter and more fuel-efficient CFM56-7B engines are used. Higher MTOWs are offered. The 737NG includes redesigned vertical stabilizers, and winglets are available on most models.
The 737NG encompasses the -600, -700, -800, and -900 with improved performance and commonality retained from previous 737 models. The wing, engine, and fuel capacity improvements combined increase the 737's range by 900 nmi (1,700 km) to over 3,000 nmi (5,600 km), permitting transcontinental service.
The Speed Trim System, introduced on the 737 Classic, has been updated for the 737NG to include a stall identification function. Originally inhibited in high alpha scenarios, STS operates at any speed on the 737NG. STS is triggered by airspeed sensor and commands Airplane Nose Down as the airplane slows down.
The flight deck was upgraded with modern avionics, and passenger cabin improvements similar to those on the Boeing 777, including more curved surfaces and larger overhead bins than previous-generation 737s. The Next Generation 737 interior was also adopted on the Boeing 757-300. This improved on the previous interior of the Boeing 757-200 and the Boeing 737 Classic variants, the new interior became optional on the 757-200.
In 2010, new interior options for the 737NG included the 787-style Boeing Sky Interior. It introduced new pivoting overhead bins (a first for a Boeing narrow-body aircraft), new sidewalls, new passenger service units, and LED mood lighting. Boeing's newer "Space Bins" can carry 50 percent more than the pivoting bins, thus allowing a 737-800 to hold 174 carry-on bags. Boeing also offered it as a retrofit for older 737NG aircraft.
The 737-600 was launched by SAS in March 1995 with the first aircraft delivered in September 1998. A total of 69 have been produced with the last aircraft delivered to WestJet in 2006. Boeing displayed the 737-600 in its price list until August 2012. The smallest model offered was then the 737-700. The 737-600 replaces the 737-500 and is similar to the Airbus A318.
In November 1993, Southwest Airlines launched the Next-Generation program with an order for 63 737-700s and took delivery of the first one in December 1997. It replaced the 737-300, typically seating 126 passengers in two classes to 149 in all-economy configuration, similar to the Airbus A319.
In long-range cruise, it burns 4,440 lb (2,010 kg) per hour at Mach 0.785 (450 kn; 834 km/h) and FL410, increasing to 4,620-4,752 lb (2,096-2,155 kg) at Mach 0.80-Mach 0.82 (459-470 kn; 850-871 km/h). As of July 2018, all -700 series on order, 1,128 -700, 120 -700 BBJ, 20 -700C, and 14 -700W aircraft have been delivered. By June 2018, around one thousand were in service: half of them with Southwest Airlines, followed by Westjet with 56 and United Airlines with 39. The value of a new -700 stayed around $35 million from 2008 to 2018, a 2003 aircraft was valued for $15.5 million in 2016 and $12 million in 2018 and will be scrapped for $6 million by 2023.[unreliable source?]
The 737-700C is a convertible version where the seats can be removed to carry cargo instead. There is a large door on the left side of the aircraft. The United States Navy was the launch customer for the 737-700C under the military designation C-40 Clipper.
Boeing launched the 737-700ER (Extended Range) on January 31, 2006, with All Nippon Airways as the launch customer. Inspired by the Boeing Business Jet, it features the fuselage of the 737-700 and the wings and landing gear of the 737-800. When outfitted with nine auxiliary fuel tanks, it can hold 10,707 gallons (40,530 L) of fuel, and with a 171,000 lb (77,565 kg) MTOW it has a 5,775 nmi (10,695 km) range with 48 premium seats in one class. This also significantly decreases cargo payload capacity from 966 to 165 cu ft (27.4 to 4.7 m3), trading payload for increased range. The first was delivered on February 16, 2007, to ANA with 24 business class and 24 premium economy seats only. A 737-700 can typically accommodate 126 passengers in two classes. It is similar to the Airbus A319LR.
The Boeing 737-800 is a stretched version of the 737-700. It replaced the 737-400. The Boeing 737-800 competes with the Airbus A320. The 737-800 seats 162 passengers in a two-class layout or 189 passengers in a one-class layout. The 737-800 was launched on September 5, 1994. Launch customer Hapag-Lloyd Flug (now TUIfly) received the first one in April 1998.
Following Boeing's merger with McDonnell Douglas, the 737-800 also filled the gap left by Boeing's decision to discontinue the McDonnell Douglas MD-80 and MD-90 aircraft. For many airlines in the U.S., the 737-800 replaced aging Boeing 727-200 trijets.
The 737-800 burns 850 US gallons (3,200 L) of jet fuel per hour--about 80 percent of the fuel used by an MD-80 on a comparable flight, while carrying more passengers. The Airline Monitor, an industry publication, quotes a 737-800 fuel burn of 4.88 US gal (18.5 L) per seat per hour, compared to 5.13 US gal (19.4 L) for the A320. In 2011, United Airlines-- flying a Boeing 737-800 from Houston to Chicago--operated the first U.S. commercial flight powered by a blend of algae-derived biofuel and traditional jet fuel to reduce its carbon footprint.
In early 2017, a new 737-800 was valued at $48.3 million, falling to below $47 million by mid-2018.[unreliable source?] By 2025, a 17-year-old 737-800W will be worth $9.5 million and leased for $140,000 per month.[unreliable source?]
As of May 2019, Boeing had delivered 4,979 737-800s, 116 737-800As, and 21 737-800 BBJ2s and has 12 737-800 unfilled orders. The 737-800 is the most common variant of the 737NG and is the most widely used narrowbody aircraft.Ryanair, an Irish low-cost airline, is among the largest operators of the Boeing 737-800, with a fleet of over 400 737-800 aircraft serving routes across Europe, Middle East and North Africa.
In February 2016, Boeing launched a passenger-to-freighter conversion program, with converted aircraft designated as 737-800BCF (for Boeing Converted Freighter). Boeing started the program with orders for 55 conversions, with the first converted aircraft due for late 2017 delivery. The first converted aircraft was delivered to West Atlantic in April 2018.
At the 2018 Farnborough Airshow, GECAS announced an agreement for 20 firm orders and 15 option orders for the 737-800BCF, raising the commitment to 50 aircraft. Total orders and commitments include 80 aircraft to over half a dozen customers. As early 737NG aircraft become available on the market they are actively marketed to be converted to cargo planes via the Boeing Converted Freighter design as the operational economics are attractive due to the low operating costs and availability of certified pilots on a robust airframe.
Modifications to the 737-800 airframe include installing a large cargo door, a cargo handling system, and additional accommodations for non-flying crew or passengers. The aircraft is designed to fly up to 1,995 nmi (3,695 km) at a MTOW of 174,100 lb (79,000 kg).
Boeing later introduced the 737-900, the longest variant to date. Because the -900 retains the same exit configuration of the -800, seating capacity is limited to 189 in a high-density 1-class layout, although the 2-class number is lower at approximately 177. Alaska Airlines launched the 737-900 in 1997 and accepted the delivery on May 15, 2001. The 737-900 also retains the MTOW and fuel capacity of the -800, trading range for payload.
The 737-900ER (ER for extended range), which was called the 737-900X prior to launch, is the newest addition and the largest variant of the Boeing 737 NG line and was introduced to meet the range and passenger capacity of the discontinued 757-200 and to directly compete with the Airbus A321. An additional pair of exit doors and a flat rear pressure bulkhead increased seating capacity to 180 passengers in a two-class configuration. It can accommodate up to 220 passengers.
Some airlines seal the additional exit. Additional fuel capacity and standard winglets improved range to that of other 737NG variants.
The first 737-900ER was rolled out of the Renton, Washington factory on August 8, 2006, for its launch customer, Lion Air, an Indonesian low-cost airline. The airline received this aircraft on April 27, 2007, in a special dual paint scheme combining the Lion Air's logo on the vertical stabilizer and the Boeing's livery colors on the fuselage. Lion Air has orders for 103 Boeing 737-900ERs as of September 2017. Its operators are primarily US carriers and Lion Air.
As of May 2019, 52 -900s, 504 -900ERs, and seven -900 BBJ3s have been delivered with 1 unfilled order. With a smaller operator base, the -900ER is not as liquid as other variants; in October 2018, a ten-year-old -900ER was worth $19.4 million and leased for $180,000 per month over eight years, below the -800, while there is a premium for the A321 over the A320. By 2025, a seventeen-year-old -900ER will reach $8.5 million with a $120,000 lease, $1 million and $20,000 less per month than a -800W of the same age, and could be parted out or converted to a freighter.[unreliable source?]
In the late 1980s, Boeing marketed the Boeing 77-33 jet, a business jet version of the 737-300. The name was short-lived. After the introduction of the next generation series, Boeing introduced the Boeing Business Jet (BBJ) series. The BBJ1 was similar in dimensions to the 737-700 but had additional features, including stronger wings and landing gear from the 737-800, and has increased range (through the use of extra fuel tanks) over the other various 737 models. The first BBJ rolled out on August 11, 1998 and flew for the first time on September 4.
On October 11, 1999 Boeing launched the BBJ2. Based on the 737-800, it is 5.84 m (19 ft 2 in) longer than the BBJ1, with 25% more cabin space and twice the baggage space, but has slightly reduced range. It is also fitted with auxiliary belly fuel tanks and winglets. The first BBJ2 was delivered on February 28, 2001.
The BBJ3 aircraft is based on the 737-900ER aircraft. In January 2014, three 737-900ER aircraft had been configured as BBJ3 business jets for Saudi Arabian customers. The BBJ3 is approximately 16 feet longer than the 737-800/BBJ2, and has a slightly shorter range.
As of July 2018, 6,343 Boeing 737 Next Generation aircraft were in commercial service. This comprised 39 -600s, 1,027 -700s, 4,764 -800s and 513 -900s.
Data through December 31, 2019
An analysis by Boeing on commercial jet airplane accidents in the period 1959-2017 showed that the Next Generation series had a hull loss rate of 0.17 per million departures compared to 0.71 for the classic series and 1.75 for the original series.
|2-class:56-62||108 (8F@36" 100Y@32")||128 (8F@36" 120Y@32")||160 (12F@36" 148Y@32")||177 (12F@36" 165Y@32")|
|1-class:56-62||123 @32" - 130 @ 30"||140 @32" - 148 @ 30"||175 @32" - 184 @ 30"||177 @32" - 215 @ 28"|
|Seat width:67||First : 22in / 56 cm; Economy : 17in / 43 cm|
|Length:34-41||102 ft 6 in / 31.24 m||110 ft 4 in / 33.63 m||129 ft 6 in / 39.47 m||138 ft 2 in / 42.11 m|
|Height:34-41||41 ft 3 in / 12.57 m||41 ft 2 in / 12.55 m|
|Wing||Span: 112 ft 7 in / 34.32 m, with winglets: 117 ft 5in / 35.79m;:34-41 Area: 124.60 m2 (1,341.2 sq ft); Sweepback: 25°; AR: 9.44|
|Fuselage:67||Width: 12 ft 4 in (3.76 m); Cabin width: 11 ft 7 in (3.53 m); Cabin height: 86.6 in (2.20 m)|
|OEW:21-24||80,200 lb / 36,378 kg||83,000 lb / 37,648 kg||91,300 lb / 41,413 kg||98,495 lb / 44,677 kg|
|MLW:21-24||121,500 lb / 55,111 kg||129,200 lb / 58,604 kg||146,300 lb / 66,361 kg||157,300 lb / 71,350 kg|
|MTOW:21-24||144,500 lb / 65,544 kg||154,500 lb / 70,080 kg||174,200 lb / 79,016 kg||187,700 lb / 85,139 kg|
|Fuel capacity:21-24||6,875 US gal / 26,022 L||7,837 US gal / 29,666 L[a]|
|Lower deck cargo:21-24||720 ft³ / 20.4 m³||966 ft³ / 27.4 m³||1,555 ft³ / 44.1 m³||1,826 ft³ / 51.7 m³|
|Takeoff run[b]||6,161 ft (1,878 m)||6,699 ft (2,042 m)||7,598 ft (2,316 m)||9,800 ft (3,000 m):159|
|Flight envelope||41,000 feet (12,497 m) Ceiling, Mach 0.82 (470 kn; 871 km/h) MMo|
|Cruise||Mach 0.785 (453 kn; 838 km/h)||Mach 0.781 (450 kn; 834 km/h)||Mach 0.789 (455 kn; 842 km/h)||Mach 0.79 (455 kn; 844 km/h)|
|Range||3,235 nmi (5,991 km)[c]||3,010 nmi (5,570 km)[d]||2,935 nmi (5,436 km)[e]||2,950 nmi (5,460 km)[f]|
|Engines (× 2)||CFM56-7B18/20/22:126-133||CFM56-7B20/22/24/26/27:134-149||CFM56-7B24/26/27:150-161|
|Thrust (× 2)||20,000-22,000 lbf
89-98 kN :126-133
|Cruise max. thrust[g]||5,960 lbf (26.5 kN) (climb)|
|Engine dimensions||Fan tip diameter: 61 in (155 cm), length: 103.50 in (263 cm)|
|Engine ground clearance||18 in / 46 cm:44||19 in / 48 cm:45|
Aircraft of comparable role, configuration and era
New 737 Shows Off Operating Improvements