3D model (JSmol)
CompTox Dashboard (EPA)
|Molar mass||153.326 g/mol|
|Density||5.72 g/cm3, solid|
|Melting point||1,923 °C (3,493 °F; 2,196 K)|
|Boiling point||~ 2,000 °C (3,630 °F; 2,270 K)|
|3.48 g/100 mL (20 °C) |
90.8 g/100 mL (100 °C)
Reacts to form Ba(OH)2
|Solubility||soluble in ethanol, dilute mineral acids and alkalies; insoluble in acetone and liquid ammonia|
|Fm3m, No. 225|
Std enthalpy of
|Safety data sheet||See: data page|
|GHS Signal word||Danger|
|H301, H302, H314, H315, H318, H332, H412|
|P210, P220, P221, P260, P261, P264, P270, P271, P273, P280, P283, P301+310, P301+312, P301+330+331, P302+352, P303+361+353, P304+312, P304+340, P305+351+338, P306+360, P310, P312, P321, P330, P332+313|
|NFPA 704 (fire diamond)|
|Supplementary data page|
|Refractive index (n),|
Dielectric constant (?r), etc.
|UV, IR, NMR, MS|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Barium oxide, BaO, baria, is a white hygroscopic non-flammable compound. It has a cubic structure and is used in cathode ray tubes, crown glass, and catalysts. It is harmful to human skin and if swallowed in large quantity causes irritation. Excessive quantities of barium oxide may lead to death.
Barium oxide is used as a coating for hot cathodes, for example, those in cathode ray tubes. It replaced lead(II) oxide in the production of certain kinds of glass such as optical crown glass. While lead oxide raised the refractive index, it also raised the dispersive power, which barium oxide does not alter. Barium oxide also has use as an ethoxylation catalyst in the reaction of ethylene oxide and alcohols, which takes place between 150 and 200 °C.
It is also a source of pure oxygen through heat fluctuation. It readily oxidises to BaO2 by formation of a peroxide ion. The complete peroxidation of BaO to BaO2 occurs at moderate temperatures but the increased entropy of the O2 molecule at high temperatures means that BaO2 decomposes to O2 and BaO at 1175K.
The reaction was used as a large scale method to produce oxygen before the air separation became the dominant method in the beginning of the 20th century. The method was named after its inventors the Brin process.
Barium oxide is made by heating barium carbonate. It may also be prepared by thermal decomposition of barium nitrate. Likewise, it is often formed through the decomposition of other barium salts.
Barium oxide is an irritant. If it contacts the skin or the eyes or is inhaled it causes pain and redness. However, it is more dangerous when ingested. It can cause nausea and diarrhea, muscle paralysis, cardiac arrhythmia, and can cause death. If ingested, medical attention should be sought immediately.