Aluminium
Get Aluminium essential facts below. View Videos or join the Aluminium discussion. Add Aluminium to your PopFlock.com topic list for future reference or share this resource on social media.
Aluminium

Aluminium,  13Al
Aluminium-4.jpg
General properties
Pronunciation
Alternative name aluminum (U.S., Canada)
Appearance silvery gray metallic
Standard atomic weight (Ar, standard) [1]
Aluminium in the periodic table
13
Group
Period period 3
Element category   post-transition metal, sometimes considered a metalloid
Block p-block
Electron configuration [Ne] 3s2 3p1
Electrons per shell
2, 8, 3
Physical properties
Phase at STP solid
Melting point 933.47 K ​(660.32 °C, ​1220.58 °F)
Boiling point 2743 K ​(2470 °C, ​4478 °F)
Density (near r.t.) 2.70 g/cm3
when liquid (at m.p.) 2.375 g/cm3
Heat of fusion 10.71 kJ/mol
Heat of vaporization 284 kJ/mol
Molar heat capacity 24.20 J/(mol·K)
Vapor pressure
P (Pa) 1 10 100 1 k 10 k 100 k
at T (K) 1482 1632 1817 2054 2364 2790
Atomic properties
Oxidation states +3, +2,[2] +1,[3] -1, -2 ​(an amphoteric oxide)
Electronegativity Pauling scale: 1.61
Ionization energies
  • 1st: 577.5 kJ/mol
  • 2nd: 1816.7 kJ/mol
  • 3rd: 2744.8 kJ/mol
  • (more)
Atomic radius empirical: 143 pm
Covalent radius 121±4 pm
Van der Waals radius 184 pm
Miscellanea
Crystal structureface-centered cubic (fcc)
Face-centered cubic crystal structure for aluminium
Speed of sound thin rod (rolled) 5000 m/s (at r.t.)
Thermal expansion 23.1 µm/(m·K) (at 25 °C)
Thermal conductivity 237 W/(m·K)
Electrical resistivity 28.2 n?·m (at 20 °C)
Magnetic ordering paramagnetic[4]
Magnetic susceptibility +16.5·10-6 cm3/mol
Young's modulus 70 GPa
Shear modulus 26 GPa
Bulk modulus 76 GPa
Poisson ratio 0.35
Mohs hardness 2.75
Vickers hardness 160-350 MPa
Brinell hardness 160-550 MPa
CAS Number 7429-90-5
History
Naming after alumina (aluminium oxide), itself named after mineral alum
Prediction Antoine Lavoisier
Discovery and first isolation Hans Christian Ørsted (1824)
Named by Humphry Davy
Main isotopes of aluminium
Iso­tope Abun­dance Half-life (t1/2) Decay mode Pro­duct
26Al trace 7.17×105 y ?+ 26Mg
? 26Mg
? -
27Al 100% stable
| references | in Wikidata

Aluminium or aluminum is a chemical element with symbol Al and atomic number 13. It is a silvery-white, soft, nonmagnetic and ductile metal in the boron group. By mass, aluminium makes up about 8% of the Earth's crust; it is the third most abundant element after oxygen and silicon and the most abundant metal in the crust, though it is less common in the mantle below. The chief ore of aluminium is bauxite. Aluminium metal is so chemically reactive that native specimens are rare and limited to extreme reducing environments. Instead, it is found combined in over 270 different minerals.[5]

Aluminium is remarkable for its low density and its ability to resist corrosion through the phenomenon of passivation. Aluminium and its alloys are vital to the aerospace industry[6] and important in transportation and building industries, such as building facades and window frames.[7] The oxides and sulfates are the most useful compounds of aluminium.[6]

Despite its prevalence in the environment, no known form of life uses aluminium salts metabolically, but aluminium is well tolerated by plants and animals.[8] Because of these salts' abundance, the potential for a biological role for them is of continuing interest, and studies continue.

Physical characteristics

Nuclei and isotopes

Aluminium's atomic number is 13. Of aluminium isotopes, only one is stable: 27Al. This is consistent with the fact aluminium's atomic number is odd.[a] It is the only isotope that has existed on Earth in its current form since the creation of the planet. It is essentially the only isotope representing the element on Earth, which makes aluminium a mononuclidic element and practically equates its standard atomic weight to that of the isotope. Such a low standard atomic weight of aluminium[b] has some effects on the properties of the element (see below).

All other isotopes are radioactive and could not have survived; the most stable isotope of these is 26Al (half-life 720,000 years). 26Al is produced from argon in the atmosphere by spallation caused by cosmic ray protons and used in radiodating. The ratio of 26Al to 10Be has been used to study transport, deposition, sediment storage, burial times, and erosion on 105 to 106 year time scales.[10] Most meteorite scientists believe that the energy released by the decay of 26Al was responsible for the melting and differentiation of some asteroids after their formation 4.55 billion years ago.[11]

The remaining isotopes of aluminium, with mass numbers ranging from 21 to 43, all have half-lives well under an hour. Three metastable states are known, all with half-lives under a minute.[9]

Electron shell

An aluminium atom has 13 electrons, arranged in an electron configuration of [Ne]3s23p1,[12] with three electrons beyond a stable noble gas configuration. Accordingly, the combined first three ionization energies of aluminium are far lower than the fourth ionization energy alone.[13] Aluminium can relatively easily surrender its three outermost electrons in many chemical reactions (see below). The electronegativity of aluminium is 1.61 (Pauling scale).[14]

A free aluminium atom has a radius of 143 pm.[15] With the three outermost electrons removed, the radius shrinks to 39 pm for a 4-coordinated atom or 53.5 pm for a 6-coordinated atom.[15] At standard temperature and pressure, aluminium atoms (when not affected by atoms of other elements) form a face-centered cubic crystal system bound by metallic bonding provided by atoms' outermost electrons; hence aluminium (at these conditions) is a metal. This crystal system is shared by some other metals, such as lead and copper; the size of a unit cell of aluminium is comparable to that of those.[16]

Bulk

Etched surface from a high purity (99.9998%) aluminium bar, size 55×37 mm

Aluminium metal, when in quantity, is very shiny and resembles silver because it preferentially absorbs far ultraviolet radiation while reflecting all visible light so it does not impart any color to reflected light, unlike the reflectance spectra of copper and gold. Another important characteristic of aluminium is its low density, 2.70 g/cm3.[17][c] Aluminium is a relatively soft, durable, lightweight, ductile, and malleable with appearance ranging from silvery to dull gray, depending on the surface roughness. It is nonmagnetic and does not easily ignite. A fresh film of aluminium serves as a good reflector (approximately 92%) of visible light and an excellent reflector (as much as 98%) of medium and far infrared radiation. The yield strength of pure aluminium is 7-11 MPa, while aluminium alloys have yield strengths ranging from 200 MPa to 600 MPa.[18] Aluminium has about one-third the density and stiffness of steel. It is easily machined, cast, drawn and extruded.

Aluminium atoms are arranged in a face-centered cubic (fcc) structure. Aluminium has a stacking-fault energy of approximately 200 mJ/m2.[19]

Aluminium is a good thermal and electrical conductor, having 59% the conductivity of copper, both thermal and electrical, while having only 30% of copper's density. Aluminium is capable of superconductivity, with a superconducting critical temperature of 1.2 kelvin and a critical magnetic field of about 100 gauss (10 milliteslas).[20] Aluminium is the most common material for the fabrication of superconducting qubits.[21]

Chemistry

Corrosion resistance can be excellent because a thin surface layer of aluminium oxide forms when the bare metal is exposed to air, effectively preventing further oxidation,[22] in a process termed passivation. The strongest aluminium alloys are less corrosion resistant due to galvanic reactions with alloyed copper.[18] This corrosion resistance is greatly reduced by aqueous salts, particularly in the presence of dissimilar metals.

In highly acidic solutions, aluminium reacts with water to form hydrogen, and in highly alkaline ones to form aluminates-- protective passivation under these conditions is negligible. Primarily because it is corroded by dissolved chlorides, such as common sodium chloride, household plumbing is never made from aluminium.[23]

However, because of its general resistance to corrosion, aluminium is one of the few metals that retains silvery reflectance in finely powdered form, making it an important component of silver-colored paints. Aluminium mirror finish has the highest reflectance of any metal in the 200-400 nm (UV) and the 3,000-10,000 nm (far IR) regions; in the 400-700 nm visible range it is slightly outperformed by tin and silver and in the 700-3000 nm (near IR) by silver, gold, and copper.[24]

Aluminium is oxidized by water at temperatures below 280 °C to produce hydrogen, aluminium hydroxide and heat:

2 Al + 6 H2O -> 2 Al(OH)3 + 3 H2

This conversion is of interest for the production of hydrogen. However, commercial application of this fact has challenges in circumventing the passivating oxide layer, which inhibits the reaction, and in storing the energy required to regenerate the aluminium metal.[25]

Inorganic compounds

The vast majority of compounds, including all Al-containing minerals and all commercially significant aluminium compounds, feature aluminium in the oxidation state 3+. The coordination number of such compounds varies, but generally Al3+ is six-coordinate or tetracoordinate. Almost all compounds of aluminium(III) are colorless.[26]

All four trihalides are well known. Unlike the structures of the three heavier trihalides, aluminium fluoride (AlF3) features six-coordinate Al. The octahedral coordination environment for AlF3 is related to the compactness of the fluoride ion, six of which can fit around the small Al3+ center. AlF3 sublimes (with cracking) at 1,291 °C (2,356 °F). With heavier halides, the coordination numbers are lower. The other trihalides are dimeric or polymeric with tetrahedral Al centers. These materials are prepared by treating aluminium metal with the halogen, although other methods exist. Acidification of the oxides or hydroxides affords hydrates. In aqueous solution, the halides often form mixtures, generally containing six-coordinate Al centers that feature both halide and aquo ligands. When aluminium and fluoride are together in aqueous solution, they readily form complex ions such as , , and . In the case of chloride, polyaluminium clusters are formed such as [Al13O4(OH)24(H2O)12]7+.

Aluminium hydrolysis as a function of pH.[] Coordinated water molecules are omitted.

Aluminium forms one stable oxide with the chemical formula Al2O3. It can be found in nature in the mineral corundum.[27] Aluminium oxide is also commonly called alumina.[28]Sapphire and ruby are impure corundum contaminated with trace amounts of other metals. The two oxide-hydroxides, AlO(OH), are boehmite and diaspore. There are three trihydroxides: bayerite, gibbsite, and nordstrandite, which differ in their crystalline structure (polymorphs). Most are produced from ores by a variety of wet processes using acid and base. Heating the hydroxides leads to formation of corundum. These materials are of central importance to the production of aluminium and are themselves extremely useful.

Aluminium carbide (Al4C3) is made by heating a mixture of the elements above 1,000 °C (1,832 °F). The pale yellow crystals consist of tetrahedral aluminium centers. It reacts with water or dilute acids to give methane. The acetylide, Al2(C2)3, is made by passing acetylene over heated aluminium.

Aluminium nitride (AlN) is the only nitride known for aluminium. Unlike the oxides, it features tetrahedral Al centers. It can be made from the elements at 800 °C (1,472 °F). It is air-stable material with a usefully high thermal conductivity. Aluminium phosphide (AlP) is made similarly; it hydrolyses to give phosphine:

AlP + 3 H2O -> Al(OH)3 + PH3

Rarer oxidation states

Although the great majority of aluminium compounds feature Al3+ centers, compounds with lower oxidation states are known and sometime of significance as precursors to the Al3+ species.

Aluminium(I)

AlF, AlCl and AlBr exist in the gaseous phase when the trihalide is heated with aluminium. The composition AlI is unstable at room temperature, converting to triiodide:[29]

A stable derivative of aluminium monoiodide is the cyclic adduct formed with triethylamine, Al4I4(NEt3)4. Also of theoretical interest but only of fleeting existence are Al2O and Al2S. Al2O is made by heating the normal oxide, Al2O3, with silicon at 1,800 °C (3,272 °F) in a vacuum.[29] Such materials quickly disproportionate to the starting materials.

Aluminium(II)

Very simple Al(II) compounds are invoked or observed in the reactions of Al metal with oxidants. For example, aluminium monoxide, AlO, has been detected in the gas phase after explosion[30] and in stellar absorption spectra.[31] More thoroughly investigated are compounds of the formula R4Al2 which contain an Al-Al bond and where R is a large organic ligand.[32]

Organoaluminium compounds and related hydrides

Structure of trimethylaluminium, a compound that features five-coordinate carbon.

A variety of compounds of empirical formula AlR3 and AlR1.5Cl1.5 exist.[33] These species usually feature tetrahedral Al centers formed by dimerization with some R or Cl bridging between both Al atoms, e.g. "trimethylaluminium" has the formula Al2(CH3)6 (see figure). With large organic groups, triorganoaluminium compounds exist as three-coordinate monomers, such as triisobutylaluminium. Such compounds[which?] are widely used in industrial chemistry, despite the fact that they are often highly pyrophoric. Few analogues exist between organoaluminium and organoboron compounds other than[clarification needed] large organic groups.

The industrially important aluminium hydride is lithium aluminium hydride (LiAlH4), which is used in as a reducing agent in organic chemistry. It can be produced from lithium hydride and aluminium trichloride:

4 LiH + AlCl3 -> LiAlH4 + 3 LiCl

Several useful derivatives of LiAlH4 are known, e.g. sodium bis(2-methoxyethoxy)dihydridoaluminate. The simplest hydride, aluminium hydride or alane, remains a laboratory curiosity. It is a polymer with the formula (AlH3)n, in contrast to the corresponding boron hydride that is a dimer with the formula (BH3)2.

Natural occurrence

In space

Aluminium's per-particle abundance in the Solar System is 3.15 ppm (parts per million).[34][d] It is the twelfth most abundant of all elements and third most abundant among the elements that have odd atomic numbers, after hydrogen and nitrogen.[34] The only stable isotope of aluminium, 27Al, is the eighteenth most abundant nucleus in the Universe. It is created almost entirely after fusion of carbon in massive stars that will later become Type II supernovae: this fusion creates 26Mg, which, upon capturing free protons and neutrons becomes aluminium. Some smaller quantities of 27Al are created in hydrogen burning shells of evolved stars, where 26Mg can capture free protons.[35] Essentially all aluminium now in existence is 27Al; 26Al was present in the early Solar System but is currently extinct. However, the trace quantities of 26Al that do exist are the most common gamma ray emitter in the interstellar gas.[35]

On Earth

Bauxite, a major aluminium ore. The red-brown color is due to the presence of iron minerals.

Overall, the Earth is about 1.59% aluminium by mass (seventh in abundance by mass).[36] Aluminium occurs in greater proportion in the Earth than in the Universe because aluminium easily forms the oxide and becomes bound into rocks and aluminium stays in the Earth's crust while less reactive metals sunk to the core.[35] In the Earth's crust, aluminium is the most abundant (8.3% by mass) metallic element and the third most abundant of all elements (after oxygen and silicon).[26] A large number of silicates in the Earth's crust contain aluminium.[37] In contrast, the Earth's mantle is only 2.38% aluminium by mass.[38]

Because of its strong affinity for oxygen, aluminium is almost never found in the elemental state; instead it is found in oxides or silicates. Feldspars, the most common group of minerals in the Earth's crust, are aluminosilicates. Aluminium also occurs in the minerals beryl, cryolite, garnet, spinel, and turquoise.[39] Impurities in Al2O3, such as chromium and iron, yield the gemstones ruby and sapphire, respectively.[40] Native aluminium metal can only be found as a minor phase in low oxygen fugacity environments, such as the interiors of certain volcanoes.[41] Native aluminium has been reported in cold seeps in the northeastern continental slope of the South China Sea. It is possible that these deposits resulted from bacterial reduction of tetrahydroxoaluminate Al(OH)4-.[42]

Although aluminium is a common and widespread element, not all aluminium minerals are economically viable sources of the metal. Almost all metallic aluminium is produced from the ore bauxite (AlOx(OH)3-2x). Bauxite occurs as a weathering product of low iron and silica bedrock in tropical climatic conditions.[43] In 2017, most bauxite was mined in Australia, China, Guinea, and India.[44]

History

Friedrich Wöhler, the chemist who first thoroughly described the aluminium metal

The history of aluminium has been shaped by usage of alum. The first written record of alum, made by Greek historian Herodotus, dates back to the 5th century BCE.[45] The ancients are known to have used alum as dyeing mordants and for city defense.[45] After the Crusades, alum, a good indispensable in European fabric industry,[46] was a subject of international commerce;[47] it was imported to Europe from the eastern Mediterranean until the mid-15th century.[48]

The nature of alum remained unknown. Around 1530, Swiss physician Paracelsus suggested alum was a salt of an earth of alum.[49] In 1595, German doctor and chemist Andreas Libavius experimentally confirmed this;[50] In 1722, German chemist Friedrich Hoffmann announced his belief that the base of alum was a distinct earth.[51] In 1754, German chemist Andreas Sigismund Marggraf synthesized alumina by boiling clay in sulfuric acid and subsequently adding potash.[51]

Attempts to produce aluminium metal date back to 1760.[52] The first successful attempt, however, was completed in 1824 by Danish physicist and chemist Hans Christian Ørsted. He reacted anhydrous aluminium chloride with potassium amalgam, yielding a lump of metal looking similar to tin.[53][54] He presented his results and demonstrated a sample of the new metal in 1825.[55][56] In 1827, German chemist Friedrich Wöhler repeated Ørsted's experiments but did not identify any aluminium.[57] (The reason for this inconsistency was only discovered in 1921.)[58] He conducted a similar experiment in 1827 by mixing anhydrous aluminium chloride with potassium and produced a powder of aluminium.[54] In 1845, he was able to produce small pieces of the metal and described some physical properties of this metal.[58] For many years thereafter, Wöhler was credited as the discoverer of aluminium following the success and descriptive details of his 1845 experiment.[59] As Wöhler's method could not yield great quantities of aluminium, the metal remained rare; its cost exceeded that of gold.[57]

The statue of Anteros in Piccadilly Circus, London, was made in 1893 and is one of the first statues cast in aluminium.

French chemist Henri Etienne Sainte-Claire Deville announced an industrial method of aluminium production in 1854 at the Paris Academy of Sciences.[60] Aluminium trichloride could be reduced by sodium, which was more convenient and less expensive than potassium, which Wöhler had used.[61] In 1856, Deville along with companions established the world's first industrial production of aluminium.[60] From 1855 to 1859, the price of aluminium dropped by an order of magnitude, from US$500 to $40 per pound.[62] Even then, aluminium was still not of great purity and produced aluminium differed in properties by sample.[63]

The first industrial large-scale production method was independently developed in 1886 by French engineer Paul Héroult and American engineer Charles Martin Hall; it is now known as the Hall-Héroult process.[64] The Hall-Héroult process converts alumina into the metal. Austrian chemist Carl Joseph Bayer discovered a way of purifying bauxite to yield alumina, now known as the Bayer process, in 1889.[65] Modern production of the aluminium metal is based on the Bayer and Hall-Héroult processes. The Hall-Héroult process was further improved in 1920 by a team led by Swedish chemist Carl Wilhelm Söderberg; this improvement greatly increased the world output of aluminium.[66]

Prices of aluminium dropped and aluminium became widely used in jewelry, everyday items, eyeglass frames, optical instruments, tableware, and foil in the 1890s and early 20th century. Aluminium's ability to form hard yet light alloys with other metals provided the metal many uses at the time.[67] During World War I, major governments demanded large shipments of aluminium for light strong airframes.[68]

By the mid-20th century, aluminium had become a part of everyday lives, also becoming an essential component of houseware.[69] During the mid-20th century, aluminium emerged as a civil engineering material, with buildings using for both basic construction and interior,[70] and advanced its use in military engineering, for both airplanes and land armor vehicle engines.[71]Earth's first artificial satellite, launched in 1957, consisted of two separate aluminium semi-spheres joined together and all subsequent space vehicles have been made of aluminium.[66] The aluminium can was invented in 1956 and employed as a storage for drinks in 1958.[72]

World production of aluminium since 1900

Throughout the 20th century, the production of aluminium rose rapidly: while the world production of aluminium in 1900 was 6,800 metric tons, the annual production first exceeded 100,000 metric tons in 1916; 1,000,000 tons in 1941; 10,000,000 tons in 1971.[73] In the 1970s, the increased demand for aluminium made it an exchange commodity; it entered the London Metal Exchange, the oldest industrial metal exchange in the world, in 1978.[66] The output continued to grow: the annual production of aluminium exceeded 50,000,000 metric tons in 2013.[73]

The real price for aluminium declined from $14,000 per metric ton in 1900 to $2,340 in 1948 (in 1998 United States dollars).[73] Extraction and processing costs were lowered over technological progress and the scale of the economies. However, the need to exploit lower-grade poorer quality deposits and the use of fast increasing input costs (above all, energy) increased the net cost of aluminium;[74] the real price began to grow in the 1970s with the rise of energy cost.[75] Production moved from the industrialized countries to countries where production was cheaper.[76] Production costs in the late 20th century changed because of advances in technology, lower energy prices, exchange rates of the United States dollar, and alumina prices.[77] The BRIC countries' combined share grew in the first decade of the 21st century from 32.6% to 56.5% in primary production and 21.4% to 47.8% in primary consumption.[78] China is accumulating an especially large share of world's production thanks to abundance of resources, cheap energy, and governmental stimuli;[79] it also increased its consumption share from 2% in 1972 to 40% in 2010.[80] In the United States, Western Europe, and Japan, most aluminium was consumed in transportation, engineering, construction, and packaging.[81]

Etymology

Aluminium is named after alumina, or aluminium oxide in modern nomenclature. The word "alumina" comes from "alum", the mineral from which it was collected. The word "alum" comes from alumen, a Latin word meaning "bitter salt".[82] The word alumen stems from the Proto-Indo-European root *alu- meaning "bitter" or "beer".[83]

1897 American advertisement featuring the aluminum spelling

British chemist Humphry Davy, who performed a number of experiments aimed to synthesize the metal, is credited as the person who named aluminium. In 1808, he suggested the metal be named alumium.[84] This suggestion was criticized by contemporary chemists from France, Germany, and Sweden, who insisted the metal should be named for the oxide, alumina, from which it would be isolated.[85] In 1812, Davy chose aluminum, thus producing the modern name.[86] However, it is spelled and pronounced differently outside of North America: aluminum is in use in the U.S. and Canada while aluminium is in use elsewhere.[87]

Spelling

The suffix followed the precedent set in other newly discovered elements of the time: potassium, sodium, magnesium, calcium, and strontium (all of which Davy isolated himself). Nevertheless, element names ending in were not unknown at the time; for example, platinum (known to Europeans since the 16th century), molybdenum (discovered in 1778), and tantalum (discovered in 1802). The suffix is consistent with the universal spelling alumina for the oxide (as opposed to aluminia); compare to lanthana, the oxide of lanthanum, and magnesia, ceria, and thoria, the oxides of magnesium, cerium, and thorium, respectively.

In 1812, British scientist Thomas Young[88] wrote an anonymous review of Davy's book, in which he objected to aluminum and proposed the name aluminium: "for so we shall take the liberty of writing the word, in preference to aluminum, which has a less classical sound."[89] This name did catch on: while the spelling was occasionally used in Britain, the American scientific language used from the start.[90] Most scientists used throughout the world in the 19th century;[91] it still remains the standard in most other languages.[87] In 1828, American lexicographer Noah Webster used exclusively the aluminum spelling in his American Dictionary of the English Language.[92] In the 1830s, the spelling started to gain usage in the United States; by the 1860s, it had become the more common spelling there outside science.[90] In 1892, Hall used the spelling in his advertising handbill for his new electrolytic method of producing the metal, despite his constant use of the spelling in all the patents he filed between 1886 and 1903. It was subsequently suggested this was a typo rather than intended.[87] By 1890, both spellings had been common in the U.S. overall, the spelling being slightly more common; by 1895, the situation had reversed; by 1900, aluminum had been twice as common as aluminium; during the following decade, the spelling dominated American usage.[93] In 1925, the American Chemical Society adopted this spelling.[93]

The International Union of Pure and Applied Chemistry (IUPAC) adopted aluminium as the standard international name for the element in 1990.[94] In 1993, they recognized aluminum as an acceptable variant;[94] the same is true for the most recent 2005 edition of the IUPAC nomenclature of inorganic chemistry.[95] IUPAC official publications use the spelling as primary but list both where appropriate.[e]English Wikipedia follows this standard by adopting the "aluminium" spelling as the sole spelling in chemistry-related articles.

Production and refinement

World's top producers of primary aluminium, 2016[97]
Country Output
(thousand
tons)
 China 31,873
 Russia 3,561
 Canada 3,208
 India 2,896
 United Arab Emirates 2,471
 Australia 1,635
 Norway 1,247
 Bahrain 971
 Saudi Arabia 869
 United States 818
 Brazil 793
 South Africa 701
 Iceland 700
World total 58,800

Aluminium production is highly energy-consuming, and so the producers tend to locate smelters in places where electric power is both plentiful and inexpensive.[98] As of 2012, the world's largest smelters of aluminium are located in China, Russia, Bahrain, United Arab Emirates, and South Africa.[99]

In 2016, China was the top producer of aluminium with a world share of fifty-five percent; the next largest producing countries were Russia, Canada, India, and the United Arab Emirates.[97]

According to the International Resource Panel's Metal Stocks in Society report, the global per capita stock of aluminium in use in society (i.e. in cars, buildings, electronics etc.) is 80 kg (180 lb). Much of this is in more-developed countries (350-500 kg (770-1,100 lb) per capita) rather than less-developed countries (35 kg (77 lb) per capita).[100]

Bayer process

Bauxite is converted to aluminium oxide by the Bayer process. Bauxite is blended for uniform composition and grinded. The resulting slurry is mixed with a hot solution of sodium hydroxide; the mixture is then treated in a digester vessel at a pressure well above atmospheric, dissolving the aluminium hydroxide in bauxite while converting impurities into a relatively insoluble compounds:[101]

Al(OH)3 + Na+ + OH- -> Na+ + [Al(OH)4]-

After this reaction, the slurry is at a temperature above its atmospheric boiling point. It is cooled by removing steam as pressure is reduced. The bauxite residue is separated from the solution and discarded. The solution, free of solids, is seeded with small crystals of aluminium hydroxide; this causes decomposition of the [Al(OH)4]- ions to aluminium hydroxide. After about half of aluminium has precipitated, the mixture is sent to classifiers. Small crystals of aluminium hydroxide are collected to serve as seeding agents; coarse particles are reduced to aluminium oxide; excess solution is removed by evaporation, (if needed) purified, and recycled.[101]

Hall-Héroult process

The conversion of alumina to aluminium metal is achieved by the Hall-Héroult process. In this energy-intensive process, a solution of alumina in a molten (950 and 980 °C (1,740 and 1,800 °F)) mixture of cryolite (Na3AlF6) with calcium fluoride is electrolyzed to produce metallic aluminium. The liquid aluminium metal sinks to the bottom of the solution and is tapped off, and usually cast into large blocks called aluminium billets for further processing.[8]

Extrusion billets of aluminium

Anodes of the electrolysis cell are made of carbon--the most resistant material against fluoride corrosion--and either bake at the process or are prebaked. The former, also called Söderberg anodes, are less power-efficient and fumes released during baking are costly to collect, which is why they are being replaced by prebaked anodes even though they save the power, energy, and labor to prebake the cathodes. Carbon for anodes should be preferably pure so that neither aluminium nor the electrolyte is contaminated with ash. Despite carbon's resistivity against corrosion, it is still consumed at a rate of 0.4-0.5 kg per each kilogram of produced aluminium. Cathodes are made of anthracite; high purity for them is not required because impurities leach only very slowly. Cathode is consumed at a rate of 0.02-0.04 kg per each kilogram of produced aluminium. A cell is usually a terminated after 2-6 years following a failure of the cathode.[8]

The Hall-Heroult process produces aluminium with a purity of above 99%. Further purification can be done by the Hoopes process. This process involves the electrolysis of molten aluminium with a sodium, barium, and aluminium fluoride electrolyte. The resulting aluminium has a purity of 99.99%.[8][102]

Electric power represents about 20 to 40% of the cost of producing aluminium, depending on the location of the smelter. Aluminium production consumes roughly 5% of electricity generated in the United States.[94] Because of this, alternatives to the Hall-Héroult process have been researched, but none has turned out to be economically feasible.[8]

Common bins for recyclable waste along with a bin for unrecyclable waste. The bin with a yellow top is labeled "aluminium". Rhodes, Greece.

Recycling

Recovery of the metal through recycling has become an important task of the aluminium industry. Recycling was a low-profile activity until the late 1960s, when the growing use of aluminium beverage cans brought it to public awareness.[103] Recycling involves melting the scrap, a process that requires only 5% of the energy used to produce aluminium from ore, though a significant part (up to 15% of the input material) is lost as dross (ash-like oxide).[104] An aluminium stack melter produces significantly less dross, with values reported below 1%.[105]

White dross from primary aluminium production and from secondary recycling operations still contains useful quantities of aluminium that can be extracted industrially.[106] The process produces aluminium billets, together with a highly complex waste material. This waste is difficult to manage. It reacts with water, releasing a mixture of gases (including, among others, hydrogen, acetylene, and ammonia), which spontaneously ignites on contact with air;[107] contact with damp air results in the release of copious quantities of ammonia gas. Despite these difficulties, the waste is used as a filler in asphalt and concrete.[108]

Applications

Aluminium-bodied Austin A40 Sports (c. 1951)

Metal

Aluminium is the most widely used non-ferrous metal.[109] The global production of aluminium in 2016 was 58.8 million metric tons. It exceeded that of any other metal except iron (1,231 million metric tons).[97]

Aluminium is almost always alloyed, which markedly improves its mechanical properties, especially when tempered. For example, the common aluminium foils and beverage cans are alloys of 92% to 99% aluminium.[110] The main alloying agents are copper, zinc, magnesium, manganese, and silicon (e.g., duralumin) with the levels of other metals in a few percent by weight.[111]

The major uses for aluminium metal are in:[112]

  • Transportation (automobiles, aircraft, trucks, railway cars, marine vessels, bicycles, spacecraft, etc.). Aluminium is used because of its low density;
  • Packaging (cans, foil, frame etc.). Aluminium is used because it is non-toxic, non-adsorptive, and splinter-proof;
  • Building and construction (windows, doors, siding, building wire, sheathing, roofing, etc.). Since steel is cheaper, aluminium is used when lightness, corrosion resistance, or engineering features are important;
  • Electricity-related uses (conductor alloys, motors and generators, transformers, capacitors, etc.). Aluminium is used because it is relatively cheap, highly conductive, has adequate mechanical strength and low density, and resists corrosion;
  • A wide range of household items, from cooking utensils to furniture. Low density, good appearance, ease of fabrication, and durability are the key factors of aluminium usage;
  • Machinery and equipment (processing equipment, pipes, tools). Aluminium is used because of its corrosion resistance, non-pyrophoricity, and mechanical strength.
  • Aluminium coins have been produced for small denomination currency, owing to its low manufacturing cost and negligible bullion value.[]

Compounds

The great majority (about 90%) of aluminium oxide is converted to metallic aluminium.[101] Being a very hard material (Mohs hardness 9),[113] alumina is widely used as an abrasive;[114] being extraordinarily chemically inert, it is useful in highly reactive environments such as high pressure sodium lamps.[115] Aluminium oxide is commonly used as a catalyst for industrial processes;[101] e.g. the Claus process to convert hydrogen sulfide to sulfur in refineries and to alkylate amines.[116][117] Many industrial catalysts are supported by alumina, meaning that the expensive catalyst material is dispersed over a surface of the inert alumina.[118] Another principal use is as a drying agent or absorbent.[101][119]

Laser deposition of alumina on a substrate

Several sulfates of aluminium have industrial and commercial application. Aluminium sulfate (in its hydrate form) is produced on the annual scale of several millions of metric tons.[120] About two thirds is consumed in water treatment.[120] The next major application is in the manufacture of paper.[120] It is also used as a mordant in dyeing, in pickling seeds, deodorizing of mineral oils, in leather tanning, and in production of other aluminium compounds.[120] Two kinds of alum, ammonium alum and potassium alum, were formerly used as mordants and in leather tanning, but their use has significantly declined following availability of high-purity aluminium sulfate.[120] Anhydrous aluminium chloride is used as a catalyst in chemical and petrochemical industries, the dyeing industry, and in synthesis of various inorganic and organic compounds.[120] Aluminium hydroxychlorides are used in purifying water, in the paper industry, and as antiperspirants.[120] Sodium aluminate is used in treating water and as an accelerator of solidification of cement.[120]

Many aluminium compounds have niche applications, for example:

Biology

Schematic of aluminium absorption by human skin.[131]

Despite its widespread occurrence in the Earth crust, aluminium has no known function in biology. Aluminium salts are remarkably nontoxic, aluminium sulfate having an LD50 of 6207 mg/kg (oral, mouse), which corresponds to 500 grams for an 80 kg (180 lb) person.[8]

Toxicity

In most people, aluminium is not as toxic as heavy metals. Aluminium is classified as a non-carcinogen by the United States Department of Health and Human Services.[132] There is little evidence that normal exposure to aluminium presents a risk to healthy adult,[133] and there is evidence of no toxicity if it is consumed in amounts not greater than 40 mg/day per kg of body mass.[132] Most aluminium consumed will leave the body in feces; the small part of it that enters the body, will be excreted via urine.[134] Aluminium that does stay in the body is accumulated in, above all, bone; and apart from that, in brain, liver, and kidney.[132] Aluminium metal cannot pass the blood-brain barrier and natural filters before the brain, but some compounds, such as the fluoride, can.[135]

Effects

Aluminium, although rarely, can cause vitamin D-resistant osteomalacia, erythropoietin-resistant microcytic anemia, and central nervous system alterations. People with kidney insufficiency are especially at a risk.[132] Chronic ingestion of hydrated aluminium silicates (for excess gastric acidity control) may result in aluminium binding to intestinal contents and increased elimination of other metals, such as iron or zinc; sufficiently high doses (>50 g/day) can cause elicit anemia.[132] Since aluminium is excreted by kidneys, their function may be impaired by toxic amounts of aluminium.[135]

There are five major aluminium forms absorbed by human body: the free solvated trivalent cation (Al3+(aq)); low-molecular-weight, neutral, soluble complexes (LMW-Al0(aq)); high-molecular-weight, neutral, soluble complexes (HMW-Al0(aq)); low-molecular-weight, charged, soluble complexes (LMW-Al(L)n+/-(aq)); nano and micro-particulates (Al(L)n(s)). They are transported across cell membranes or cell epi-/endothelia through five major routes: (1) paracellular; (2) transcellular; (3) active transport; (4) channels; (5) adsorptive or receptor-mediated endocytosis.[131]

An accident in England revealed that millimolar quantities of aluminium in drinking water cause significant cognitive deficits.[132] Orally ingested aluminium salts can deposit in the brain. There is research on correlation between neurological disorders, including Alzheimer's disease,[f] and aluminium levels, but it has been inconclusive so far.[132]

Aluminium increases estrogen-related gene expression in human breast cancer cells cultured in the laboratory.[139] In very high doses, aluminium is associated with altered function of the blood-brain barrier.[140] A small percentage of people[141] have contact allergies to aluminium and experience itchy red rashes, headache, muscle pain, joint pain, poor memory, insomnia, depression, asthma, irritable bowel syndrome, or other symptoms upon contact with products containing aluminium.[142]

Exposure to powdered aluminium or aluminium welding fumes can cause pulmonary fibrosis.[143] Fine aluminium powder can ignite or explode, posing another workplace hazard.[144][145]

Exposure routes

Food is the main source of aluminium. Drinking water contains more aluminium than solid food;[132] however, aluminium in food may be absorbed more than aluminium from water.[146] Major sources of human oral exposure to aluminium include food (due to its use in food additives, food and beverage packaging, and cooking utensils), drinking water (due to its use in municipal water treatment), and aluminium-containing medications (particularly antacid/antiulcer and buffered aspirin formulations).[147] Dietary exposure in Europeans averages to 0.2-1.5 mg/kg/week but can be as high as 2.3 mg/kg/week.[132] Higher exposure levels of aluminium are mostly limited to miners, aluminium production workers, and dialysis patients.[148]

Excessive consumption of antacids, antiperspirants, vaccines, and cosmetics provide significant exposure levels.[149] Consumption of acidic foods or liquids with aluminium enhances aluminium absorption,[150] and maltol has been shown to increase the accumulation of aluminium in nerve and bone tissues.[151]

Treatment

In case of suspected sudden intake of a large amount of aluminium, the only treatment is deferoxamine mesylate which may be given to help eliminate aluminium from the body by chelation.[152][153] However, this should be applied with caution as this reduces not only aluminium body levels, but also those of other metals such as copper or iron.[152] Nutritionally, treatment of similar to those of other toxic metals and includes removal of sources of aluminium from environment, enhancing cellular energy production, enhancing activity of the eliminative organs, and chelating aluminium with nutrients.[152]

Environmental effects

"Bauxite tailings" storage facility in Stade, Germany. The aluminium industry generates about 70 million tons of this waste annually.

High levels of aluminium occur near mining cites; small amounts of aluminium are released to the environment at the coal-fired power plants or incinerators.[154] Aluminium in the air is washed out by the rain or normally settles down but small particles of aluminium remain in the air for a long time.[154]

Acidic precipitation is the main natural factor to mobilize aluminium from natural sources[132] and the main reason for the environmental effects of aluminium;[155] however, the main factor of presence of aluminium in salt and freshwater are the industrial processes that also release aluminium into air.[132]

In water, aluminium acts as a toxi? agent on gill-breathing animals such as fish by causing loss of plasma- and hemolymph ions leading to osmoregulatory failure.[155] Organic complexes of aluminium may be easily absorbed and interfere with metabolism in mammals and birds, even though this rarely happens in practice.[155]

Aluminium is primary among the factors that reduce plant growth on acidic soils. Although it is generally harmless to plant growth in pH-neutral soils, the concentration in acid soils of toxic Al3+cations increases and disturbs root growth and function.[156][157][158][159]Wheat has developed a tolerance to aluminium, releasing organic compounds that bind to harmful aluminium cations. Sorghum is believed to have the same tolerance mechanism.[160]

Aluminium production possesses its own challenges to the environment on each step of the production process. The major challenge is the greenhouse gas emissions.[148] These gases result from electrical consumption of the smelters and the byproducts of processing. The most potent of these gases are perfluorocarbons from the smelting process.[148] Released sulfur dioxide is one of the primary precursors of acid rain.[148]

A Spanish scientific report from 2001 claimed that the fungus Geotrichum candidum consumes the aluminium in compact discs.[161][162] Other reports all refer back to that report and there is no supporting original research. Better documented, the bacterium Pseudomonas aeruginosa and the fungus Cladosporium resinae are commonly detected in aircraft fuel tanks that use kerosene-based fuels (not avgas), and laboratory cultures can degrade aluminium.[163] However, these life forms do not directly attack or consume the aluminium; rather, the metal is corroded by microbe waste products.[164]

See also

Notes

  1. ^ No elements with odd atomic numbers have more than two stable isotopes; even-numbered elements have multiple stable isotopes, with tin (element 50) having the highest number of isotopes of all elements, ten.[9] See Even and odd atomic nuclei for more details.
  2. ^ Most other metals have greater standard atomic weights: for instance, that of iron is 55.8; copper 63.5; lead 207.2.[1]
  3. ^ Aluminium's low density (compared to the other metals) arises from the fact that its nuclei are much lighter, while difference in the unit cell size does not compensate for this difference.
  4. ^ Abundances in the source are listed relative to silicon rather than in per-particle notation. The sum of all elements per 106 parts of silicon is 2.6682×1010 parts; aluminium comprises 8.410×104 parts.
  5. ^ For instance, see the November-December 2013 issue of Chemistry International: in a table of (some) elements, the element is listed as "aluminium (aluminum)".[96]
  6. ^ According to the Alzheimer's Society, the medical and scientific opinion is that studies have not convincingly demonstrated a causal relationship between aluminium and Alzheimer's disease.[136] Research in this area has been inconclusive; aluminium accumulation may be a consequence of the disease rather than a causal agent.[137][138]

References

  1. ^ a b Meija, J.; et al. (2016). "Atomic weights of the elements 2013 (IUPAC Technical Report)". Pure and Applied Chemistry. 88 (3): 265-91. doi:10.1515/pac-2015-0305. 
  2. ^ D. C. Tyte (1964). "Red (B2?-A2?) Band System of Aluminium Monoxide". Nature. 202 (4930): 383. Bibcode:1964Natur.202..383T. doi:10.1038/202383a0. 
  3. ^ Dohmeier, C.; Loos, D.; Schnöckel, H. (1996). "Aluminum(I) and Gallium(I) Compounds: Syntheses, Structures, and Reactions". Angewandte Chemie International Edition. 35: 129-149. doi:10.1002/anie.199601291. 
  4. ^ Lide, D. R. (2000). "Magnetic susceptibility of the elements and inorganic compounds" (PDF). CRC Handbook of Chemistry and Physics (81st ed.). CRC Press. ISBN 0849304814. 
  5. ^ Shakhashiri, B. Z. (17 March 2008). "Chemical of the Week: Aluminum" (PDF). SciFun.org. University of Wisconsin. Archived from the original (PDF) on 9 May 2012. Retrieved 2012. 
  6. ^ a b Singh, Bikram Jit (2014). RSM: A Key to Optimize Machining: Multi-Response Optimization of CNC Turning with Al-7020 Alloy. Anchor Academic Publishing (aap_verlag). ISBN 9783954892099. 
  7. ^ Hihara, Lloyd H.; Adler, Ralph P. I.; Latanision, Ronald M. (2013-10-23). Environmental Degradation of Advanced and Traditional Engineering Materials. CRC Press. ISBN 9781439819272. 
  8. ^ a b c d e f Frank, W. B. (2009). "Aluminum". Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH. doi:10.1002/14356007.a01_459.pub2. ISBN 978-3527306732. 
  9. ^ a b IAEA - Nuclear Data Section (2017). "Livechart - Table of Nuclides - Nuclear structure and decay data". www-nds.iaea.org. International Atomic Energy Agency. Retrieved 2017. 
  10. ^ Dickin, A. P. (2005). "In situ Cosmogenic Isotopes". Radiogenic Isotope Geology. Cambridge University Press. ISBN 978-0-521-53017-0. Archived from the original on 6 December 2008. Retrieved 2008. 
  11. ^ Dodd, R. T. (1986). Thunderstones and Shooting Stars. Harvard University Press. pp. 89-90. ISBN 978-0-674-89137-1. 
  12. ^ Dean 1999, p. 4.2.
  13. ^ Dean 1999, p. 4.6.
  14. ^ Dean 1999, p. 4.29.
  15. ^ a b Dean 1999, p. 4.30.
  16. ^ Enghag, Per (2008). Encyclopedia of the Elements: Technical Data - History - Processing - Applications. John Wiley & Sons. pp. 139, 819, 949. ISBN 978-3-527-61234-5. 
  17. ^ Lide 2004, p. 4-3.
  18. ^ a b Polmear, I. J. (1995). Light Alloys: Metallurgy of the Light Metals (3 ed.). Butterworth-Heinemann. ISBN 978-0-340-63207-9. 
  19. ^ Dieter, G. E. (1988). Mechanical Metallurgy. McGraw-Hill. ISBN 978-0-07-016893-0. 
  20. ^ Cochran, J. F.; Mapother, D. E. (1958). "Superconducting Transition in Aluminum". Physical Review. 111 (1): 132-142. Bibcode:1958PhRv..111..132C. doi:10.1103/PhysRev.111.132. 
  21. ^ Devoret, M. H.; Schoelkopf, R. J. (2013). "Superconducting Circuits for Quantum Information: An Outlook". Science. 339 (6124): 1169-1174. Bibcode:2013Sci...339.1169D. doi:10.1126/science.1231930. PMID 23471399. 
  22. ^ Vargel, Christian (2004) [French edition published 1999]. Corrosion of Aluminium. Elsevier. ISBN 978-0-08-044495-6. Archived from the original on 21 May 2016. 
  23. ^ Beal, Roy E. (1 January 1999). Engine Coolant Testing : Fourth Volume. ASTM International. p. 90. ISBN 978-0-8031-2610-7. Archived from the original on 24 April 2016. 
  24. ^ Macleod, H. A. (2001). Thin-film optical filters. CRC Press. pp. 158-159. ISBN 978-0-7503-0688-1. 
  25. ^ "Reaction of Aluminum with Water to Produce Hydrogen" (PDF). U.S. Department of Energy. 1 January 2008. Archived from the original (PDF) on 14 September 2012. 
  26. ^ a b Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 217. ISBN 0-08-037941-9. 
  27. ^ Roscoe, Henry Enfield; Schorlemmer, Carl (1913). A treatise on chemistry. Macmillan. 
  28. ^ Eastaugh, Nicholas; Walsh, Valentine; Chaplin, Tracey; Siddall, Ruth (2008-09-10). Pigment Compendium. Routledge. ISBN 9781136373930. 
  29. ^ a b Dohmeier, C.; Loos, D.; Schnöckel, H. (1996). "Aluminum(I) and Gallium(I) Compounds: Syntheses, Structures, and Reactions". Angewandte Chemie International Edition. 35 (2): 129-149. doi:10.1002/anie.199601291. 
  30. ^ Tyte, D. C. (1964). "Red (B2?-A2?) Band System of Aluminium Monoxide". Nature. 202 (4930): 383-384. Bibcode:1964Natur.202..383T. doi:10.1038/202383a0. 
  31. ^ Merrill, P. W.; Deutsch, A. J.; Keenan, P. C. (1962). "Absorption Spectra of M-Type Mira Variables". The Astrophysical Journal. 136: 21. Bibcode:1962ApJ...136...21M. doi:10.1086/147348. 
  32. ^ Uhl, W. (2004). "Organoelement Compounds Possessing Al?Al, Ga?Ga, In?In, and Tl?Tl Single Bonds". Organoelement Compounds Possessing Al--Al, Ga--Ga, In--In, and Tl--Tl Single Bonds. Advances in Organometallic Chemistry. 51. pp. 53-108. doi:10.1016/S0065-3055(03)51002-4. ISBN 978-0-12-031151-4. 
  33. ^ Elschenbroich, C. (2006). Organometallics. Wiley-VCH. ISBN 978-3-527-29390-2. 
  34. ^ a b Lodders, K. (2003). "Solar System abundances and condensation temperatures of the elements" (PDF). The Astrophysical Journal. 591 (2): 1220-47. Bibcode:2003ApJ...591.1220L. doi:10.1086/375492. ISSN 0004-637X. 
  35. ^ a b c Clayton, Donald (2007). Handbook of Isotopes in the Cosmos: Hydrogen to Gallium. Cambridge University Press. pp. 129-137. ISBN 978-0-521-53083-5. 
  36. ^ William F McDonough The composition of the Earth. quake.mit.edu, archived by the Internet Archive Wayback Machine.
  37. ^ Wade, K.; Banister, A. J. (2016). The Chemistry of Aluminium, Gallium, Indium and Thallium: Comprehensive Inorganic Chemistry. Elsevier. p. 1049. ISBN 978-1-4831-5322-3. 
  38. ^ Palme, H.; O'Neill, Hugh St. C. (2005). "Cosmochemical Estimates of Mantle Composition". In Carlson, Richard W. The Mantle and Core (PDF). Elseiver. p. 14. 
  39. ^ Downs, A. J. (1993-05-31). Chemistry of Aluminium, Gallium, Indium and Thallium. Springer Science & Business Media. ISBN 9780751401035. 
  40. ^ Kotz, John C.; Treichel, Paul M.; Townsend, John (2012). Chemistry and Chemical Reactivity. Cengage Learning. p. 300. ISBN 978-1-133-42007-1. 
  41. ^ Barthelmy, D. "Aluminum Mineral Data". Mineralogy Database. Archived from the original on 4 July 2008. Retrieved 2008. 
  42. ^ Chen, Z.; Huang, Chi-Yue; Zhao, Meixun; Yan, Wen; Chien, Chih-Wei; Chen, Muhong; Yang, Huaping; Machiyama, Hideaki; Lin, Saulwood (2011). "Characteristics and possible origin of native aluminum in cold seep sediments from the northeastern South China Sea". Journal of Asian Earth Sciences. 40 (1): 363-370. Bibcode:2011JAESc..40..363C. doi:10.1016/j.jseaes.2010.06.006. 
  43. ^ Guilbert, J. F.; Park, C. F. (1986). The Geology of Ore Deposits. W. H. Freeman. pp. 774-795. ISBN 978-0-7167-1456-9. 
  44. ^ United States Geological Survey (2018). "Bauxite and alumina" (PDF). Mineral Commodities Summaries. Retrieved 2018. 
  45. ^ a b Drozdov 2007, p. 12.
  46. ^ Clapham, John Harold; Power, Eileen Edna (1941). The Cambridge Economic History of Europe: From the Decline of the Roman Empire. CUP Archive. p. 207. ISBN 978-0-521-08710-0. 
  47. ^ Drozdov 2007, p. 16.
  48. ^ Setton, Kenneth M. (1976). The papacy and the Levant: 1204-1571. 1 The thirteenth and fourteenth centuries. American Philosophical Society. ISBN 978-0-87169-127-9. OCLC 165383496. 
  49. ^ Drozdov 2007, p. 25.
  50. ^ Weeks, Mary Elvira (1968). Discovery of the elements. 1 (7 ed.). Journal of chemical education. p. 187. 
  51. ^ a b Richards 1896, p. 2.
  52. ^ Richards 1896, p. 3.
  53. ^ Royal Danish Academy of Sciences and Letters (1827). Det Kongelige Danske Videnskabernes Selskabs philosophiske og historiske afhandlinger [The philosophical and historical dissertations of the Royal Danish Science Society] (in Danish). Popp. pp. XXV-XXVI. 
  54. ^ a b Wöhler, Friedrich (1827). "Ueber das Aluminium". Annalen der Physik und Chemie. 2. 11: 146-161. 
  55. ^ Drozdov 2007, p. 36.
  56. ^ Fontani, Marco; Costa, Mariagrazia; Orna, Mary Virginia (2014). The Lost Elements: The Periodic Table's Shadow Side. Oxford University Press. p. 30. ISBN 978-0-19-938334-4. 
  57. ^ a b Venetski, S. (1969). "'Silver' from clay". Metallurgist. 13 (7): 451-453. doi:10.1007/BF00741130. 
  58. ^ a b Drozdov 2007, p. 38.
  59. ^ Light Metals: Aluminium, Magnesium and Titanium. 23. 1960. pp. 69-70. 
  60. ^ a b Drozdov 2007, p. 39.
  61. ^ Sainte-Claire Deville, H. E. (1859). De l'aluminium, ses propriétés, sa fabrication. Paris: Mallet-Bachelier. Archived from the original on 30 April 2016. 
  62. ^ Polmear, Ian (11 November 2005). Light Alloys: From Traditional Alloys to Nanocrystals. Butterworth-Heinemann. p. 15. ISBN 978-0-08-049610-8. 
  63. ^ Drozdov 2007, p. 46.
  64. ^ Drozdov 2007, pp. 55-61.
  65. ^ Drozdov 2007, p. 74.
  66. ^ a b c "Aluminium history". All about aluminium. Retrieved 2017. 
  67. ^ Drozdov 2007, pp. 64-69.
  68. ^ Ingulstad, Mats (2012). "'We Want Aluminum, No Excuses': Business-Government Relations in the American Aluminum Industry, 1917-1957". In Ingulstad, Mats; Frøland, Hans Otto. From Warfare to Welfare: Business-Government Relations in the Aluminium Industry. Tapir Academic Press. pp. 33-68. ISBN 978-82-321-0049-1. 
  69. ^ Drozdov 2007, pp. 69-70.
  70. ^ Drozdov 2007, pp. 165-166.
  71. ^ Drozdov 2007, p. 85.
  72. ^ Drozdov 2007, p. 135.
  73. ^ a b c "Aluminum". Historical Statistics for Mineral Commodities in the United States (Report). United States Geological Survey. 2017. Retrieved 2017. 
  74. ^ Nappi 2013, p. 9.
  75. ^ Nappi 2013, pp. 9-10.
  76. ^ Nappi 2013, p. 10.
  77. ^ Nappi 2013, pp. 14-15.
  78. ^ Nappi 2013, p. 17.
  79. ^ Nappi 2013, p. 20.
  80. ^ Nappi 2013, p. 22.
  81. ^ Nappi 2013, p. 23.
  82. ^ Harper, Douglas. "Alum". Online Etymology Dictionary. Retrieved 2017. 
  83. ^ Pokorny, Julius (1959). "alu- (-d-, -t-)". Indogermanisches etymologisches Wörterbuch [Indo-European etymological dictionary] (in German). A. Francke Verlag. pp. 33-34. 
  84. ^ Davy, Humphry (1808). "Electro Chemical Researches, on the Decomposition of the Earths; with Observations on the Metals obtained from the alkaline Earths, and on the Amalgam procured from Ammonia". Philosophical Transactions of the Royal Society. 98: 353. doi:10.1098/rstl.1808.0023Freely accessible. Retrieved 2009. 
  85. ^ Richards 1896, pp. 3-4.
  86. ^ Davy, Humphry (1812). "Of metals; their primary compositions with other uncompounded bodies, and with each other". Elements of Chemical Philosophy: Part 1. 1. Bradford and Inskeep. p. 201. 
  87. ^ a b c Powell, Mike (2015). Amglish: Two Nations Divided by a Common Language. BookBaby. p. 138. ISBN 978-1-4835-5100-5. 
  88. ^ Cutmore, Jonathan. "Quarterly Review Archive". Romantic Circles. University of Maryland. Archived from the original on 1 March 2017. Retrieved 2017. 
  89. ^ Young, Thomas (1812). Elements of Chemical Philosophy By Sir Humphry Davy. Quarterly Review. VIII. p. 72. ISBN 978-0-217-88947-6. 210. Retrieved 2009. 
  90. ^ a b Quinion, Michael (2005). Port Out, Starboard Home: The Fascinating Stories We Tell About the words We Use. Penguin Books Limited. pp. 23-24. ISBN 978-0-14-190904-2. 
  91. ^ Richards 1896, p. 4.
  92. ^ Webster, Noah (1828). "aluminum". American Dictionary of the English Language. Retrieved 2017. 
  93. ^ a b "Aluminum vs Aluminium". Spectra Aluminum Products. Retrieved 2017. 
  94. ^ a b c Emsley, John (2011). Nature's Building Blocks: An A-Z Guide to the Elements. OUP Oxford. pp. 24-30. ISBN 978-0-19-960563-7. 
  95. ^ Connelly, Neil G.; Damhus, Ture, eds. (2005). Nomenclature of inorganic chemistry. IUPAC Recommendations 2005 (PDF). RSC Publishing. p. 249. ISBN 978-0-85404-438-2. 
  96. ^ "Standard Atomic Weights Revised" (PDF). Chemistry International. 35 (6): 17-18. ISSN 0193-6484. 
  97. ^ a b c Brown, T. J.; Idoine, N. E.; Raycraft, E. R.; et al. (2018). World Mineral Production: 2012-2016. British Geological Survey. ISBN 978-0-85272-882-6. 
  98. ^ Brown, T. J. (2009). World Mineral Production 2003-2007. British Geological Survey. 
  99. ^ "Top 10 Largest Aluminium Smelters In The World - Gulf Business". Gulf Business. 2013. Retrieved . 
  100. ^ Graedel, T. E.; et al. (2010). Metal stocks in Society - Scientific Synthesis (PDF) (Report). International Resource Panel. p. 17. ISBN 978-92-807-3082-1. Retrieved 2017. 
  101. ^ a b c d e Hudson, L. Keith; Misra, Chanakya; Perrotta, Anthony J.; et al. (2005). "Aluminum Oxide". Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH. 
  102. ^ Totten, G. E.; Mackenzie, D. S. (2003). Handbook of Aluminum. Marcel Dekker. p. 40. ISBN 978-0-8247-4843-2. Archived from the original on 15 June 2016. 
  103. ^ Schlesinger, Mark (2006). Aluminum Recycling. CRC Press. p. 248. ISBN 978-0-8493-9662-5. 
  104. ^ "Benefits of Recycling". Ohio Department of Natural Resources. Archived from the original on 24 June 2003. 
  105. ^ "Theoretical/Best Practice Energy Use In Metalcasting Operations" (PDF). Archived from the original (PDF) on 31 October 2013. Retrieved 2013. 
  106. ^ Hwang, J. Y.; Huang, X.; Xu, Z. (2006). "Recovery of Metals from Aluminium Dross and Salt cake" (PDF). Journal of Minerals & Materials Characterization & Engineering. 5 (1): 47. Archived (PDF) from the original on 14 September 2012. 
  107. ^ "Why are dross & saltcake a concern?". www.experts123.com. Archived from the original on 14 November 2012. 
  108. ^ Dunster, A. M.; et al. (2005). "Added value of using new industrial waste streams as secondary aggregates in both concrete and asphalt" (PDF). Waste & Resources Action Programme. Archived from the original on 2010-04-02. 
  109. ^ "Aluminum". Encyclopædia Britannica. Archived from the original on 12 March 2012. Retrieved 2012. 
  110. ^ Millberg, L. S. "Aluminum Foil". How Products are Made. Archived from the original on 13 July 2007. Retrieved 2007. 
  111. ^ Lyle, J. P.; Granger, D. A.; Sanders, R. E. (2005). "Aluminum Alloys". Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH. doi:10.1002/14356007.a01_481. ISBN 978-3527306732. 
  112. ^ Davis, Joseph R. (1993). Aluminum and Aluminum Alloys. ASM International. pp. 13-17. ISBN 9780871704962. 
  113. ^ Lumley, Roger (2010). Fundamentals of Aluminium Metallurgy: Production, Processing and Applications. Elsevier Science. p. 42. ISBN 978-0-85709-025-6. 
  114. ^ Mortensen, Andreas (2006). Concise Encyclopedia of Composite Materials. Elsevier. p. 281. ISBN 978-0-08-052462-7. 
  115. ^ The Ceramic Society of Japan (19 October 2012). Advanced Ceramic Technologies & Products. Springer Science & Business Media. p. 541. ISBN 978-4-431-54108-0. 
  116. ^ Slesser, Malcolm (1988). Dictionary of Energy. Palgrave Macmillan UK. p. 138. ISBN 978-1-349-19476-6. 
  117. ^ Supp, Emil (2013). How to Produce Methanol from Coal. Springer Science & Business Media. pp. 164-165. ISBN 978-3-662-00895-9. 
  118. ^ Ertl, Gerhard; Knözinger, Helmut; Weitkamp, Jens (29 August 2008). Preparation of Solid Catalysts. John Wiley & Sons. p. 80. ISBN 978-3-527-62068-5. 
  119. ^ Armarego, W.L.F.; Chai, Christina (23 July 2009). Purification of Laboratory Chemicals. Butterworth-Heinemann. pp. 73, 109, 116, 155. ISBN 978-0-08-087824-9. 
  120. ^ a b c d e f g h Helmboldt, O. (2007). "Aluminum Compounds, Inorganic". Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH. doi:10.1002/14356007.a01_527.pub2. ISBN 978-3527306732. 
  121. ^ Ryan, Rachel S. M.; Organization, World Health (2004). WHO Model Formulary, 2004. World Health Organization. ISBN 9789241546317. 
  122. ^ Occupational Skin Disease. Grune & Stratton. 1983. ISBN 9780808914945. 
  123. ^ Galbraith, A; Bullock, S; Manias, E; Hunt, B; Richards, A (1999). Fundamentals of pharmacology: a text for nurses and health professionals. Harlow: Pearson. p. 482. 
  124. ^ Papich, Mark G. (2007). "Aluminum Hydroxide and Aluminum Carbonate". Saunders Handbook of Veterinary Drugs (2nd ed.). St. Louis, Mo: Saunders/Elsevier. pp. 15-16. ISBN 9781416028888. 
  125. ^ Brown, H. C. (1951). Reductions by Lithium Aluminum Hydride. Organic Reactions. 6. p. 469. doi:10.1002/0471264180.or006.10. ISBN 978-0471264187. 
  126. ^ Gerrans, G. C.; Hartmann-Petersen, P. (2007). "Lithium Aluminium Hydride". Sasol Encyclopaedia of Science and Technology. New Africa Books. p. 143. ISBN 978-1-86928-384-1. 
  127. ^ M. Witt; H. W. Roesky (2000). "Organoaluminum chemistry at the forefront of research and development" (PDF). Curr. Sci. 78 (4): 410. Archived from the original (PDF) on 6 October 2014. 
  128. ^ A. Andresen; H.G. Cordes; J. Herwig; W. Kaminsky; A. Merck; R. Mottweiler; J. Pein; H. Sinn; H.J. Vollmer (1976). "Halogen-free Soluble Ziegler-Catalysts for the Polymerization of Ethylene". Angew. Chem. Int. Ed. 15 (10): 630. doi:10.1002/anie.197606301. 
  129. ^ Aas, Øystein; Klemetsen, Anders; Einum, Sigurd; et al. (2011). Atlantic Salmon Ecology. John Wiley & Sons. p. 240. ISBN 978-1-4443-4819-4. 
  130. ^ Singh, Manmohan (3 August 2007). Vaccine Adjuvants and Delivery Systems. John Wiley & Sons. pp. 81-109. ISBN 978-0-470-13492-4. 
  131. ^ a b Exley, C. (2013). "Human exposure to aluminium". Environmental Science: Processes & Impacts. 15 (10): 1807-1816. doi:10.1039/C3EM00374D. PMID 23982047. 
  132. ^ a b c d e f g h i j k Dolara, Piero (21 July 2014). "Occurrence, exposure, effects, recommended intake and possible dietary use of selected trace compounds (aluminium, bismuth, cobalt, gold, lithium, nickel, silver)". International Journal of Food Sciences and Nutrition. 65 (8): 911-924. doi:10.3109/09637486.2014.937801. ISSN 1465-3478. PMID 25045935. 
  133. ^ Gitelman, H. J. "Physiology of Aluminum in Man" Archived 19 May 2016 at the Wayback Machine., in Aluminum and Health, CRC Press, 1988, ISBN 0-8247-8026-4, p. 90
  134. ^ "ATSDR - Public Health Statement: Aluminum". www.atsdr.cdc.gov. Retrieved . 
  135. ^ a b Balch, Phyllis A. (2006). Prescription for Nutritional Healing. Penguin. pp. 183, 192-193. ISBN 978-1-58333-236-8. 
  136. ^ Aluminium and Alzheimer's disease Archived 11 March 2012 at the Wayback Machine., The Alzheimer's Society. Retrieved 30 January 2009.
  137. ^ "Alzheimer's Disease and Aluminum". National Institute of Environmental Health Sciences. 2005. Archived from the original on 3 February 2007. 
  138. ^ Hopkin, Michael (21 April 2006). "Death of Alzheimer victim linked to aluminium pollution". News@nature. doi:10.1038/news060417-10. 
  139. ^ Darbre, P. D. (2006). "Metalloestrogens: an emerging class of inorganic xenoestrogens with potential to add to the oestrogenic burden of the human breast". Journal of Applied Toxicology. 26 (3): 191-7. doi:10.1002/jat.1135. PMID 16489580. 
  140. ^ Banks, W.A.; Kastin, A. J. (1989). "Aluminum-induced neurotoxicity: alterations in membrane function at the blood-brain barrier". Neurosci Biobehav Rev. 13 (1): 47-53. doi:10.1016/S0149-7634(89)80051-X. PMID 2671833. 
  141. ^ Bingham, Eula; Cohrssen, Barbara (31 July 2012). Patty's Toxicology, 6 Volume Set. John Wiley & Sons. p. 244. ISBN 978-0-470-41081-3. 
  142. ^ "Aluminum Allergy Symptoms and Diagnosis - Allergy-symptoms.org". Allergy-symptoms.org. 2016-09-20. Retrieved . 
  143. ^ al-Masalkhi, A.; Walton, S. P. (1994). "Pulmonary fibrosis and occupational exposure to aluminum". The Journal of the Kentucky Medical Association. 92 (2): 59-61. ISSN 0023-0294. PMID 8163901. 
  144. ^ "CDC - NIOSH Pocket Guide to Chemical Hazards - Aluminum". www.cdc.gov. Archived from the original on 30 May 2015. Retrieved 2015. 
  145. ^ "CDC - NIOSH Pocket Guide to Chemical Hazards - Aluminum (pyro powders and welding fumes, as Al)". www.cdc.gov. Archived from the original on 30 May 2015. Retrieved 2015. 
  146. ^ Yokel RA; Hicks CL; Florence RL (2008). "Aluminum bioavailability from basic sodium aluminum phosphate, an approved food additive emulsifying agent, incorporated in cheese". Food and Chemical Toxicology. 46 (6): 2261-6. doi:10.1016/j.fct.2008.03.004. PMC 2449821Freely accessible. PMID 18436363. 
  147. ^ United States Department of Health and Human Services (1999). Toxicological profile for aluminum (PDF) (Report). Retrieved . 
  148. ^ a b c d "Aluminum - The Environmental Literacy Council". The Environmental Literacy Council. Retrieved . 
  149. ^ Chen, Jennifer K.; Thyssen, Jacob P. (2018). Metal Allergy: From Dermatitis to Implant and Device Failure. Springer. p. 333. ISBN 978-3-319-58503-1. 
  150. ^ Slanina, P.; French, W.; Ekström, L. G.; Lööf, L.; Slorach, S.; Cedergren, A. (1986). "Dietary citric acid enhances absorption of aluminum in antacids". Clinical Chemistry. 32 (3): 539-541. PMID 3948402. 
  151. ^ Van Ginkel, M. F.; Van Der Voet, G. B.; D'haese, P. C.; De Broe, M. E.; De Wolff, F. A. (1993). "Effect of citric acid and maltol on the accumulation of aluminum in rat brain and bone". The Journal of Laboratory and Clinical Medicine. 121 (3): 453-60. PMID 8445293. 
  152. ^ a b c "ARL: Aluminum Toxicity". www.arltma.com. Retrieved . 
  153. ^ Aluminum Toxicity Archived 3 February 2014 at the Wayback Machine. from NYU Langone Medical Center. Last reviewed November 2012 by Igor Puzanov, MD
  154. ^ a b "ATSDR - Public Health Statement: Aluminum". www.atsdr.cdc.gov. Retrieved . 
  155. ^ a b c Rosseland, B. O.; Eldhuset, T. D.; Staurnes, M. (1990). "Environmental effects of aluminium". Environmental Geochemistry and Health. 12 (1-2): 17-27. doi:10.1007/BF01734045. ISSN 0269-4042. PMID 24202562. 
  156. ^ Belmonte Pereira, Luciane; Aimed Tabaldi, Luciane; Fabbrin Gonçalves, Jamile; Jucoski, Gladis Oliveira; Pauletto, Mareni Maria; Nardin Weis, Simone; Texeira Nicoloso, Fernando; Brother, Denise; Batista Teixeira Rocha, João; Chitolina Schetinger, Maria Rosa Chitolina (2006). "Effect of aluminum on ?-aminolevulinic acid dehydratase (ALA-D) and the development of cucumber (Cucumis sativus)". Environmental and Experimental Botany. 57 (1-2): 106-115. doi:10.1016/j.envexpbot.2005.05.004. 
  157. ^ Andersson, Maud (1988). "Toxicity and tolerance of aluminium in vascular plants". Water, Air, & Soil Pollution. 39 (3-4): 439-462. doi:10.1007/BF00279487 (inactive 2018-09-14). 
  158. ^ Horst, Walter J. (1995). "The role of the apoplast in aluminium toxicity and resistance of higher plants: A review". Zeitschrift für Pflanzenernährung und Bodenkunde. 158 (5): 419-428. doi:10.1002/jpln.19951580503. 
  159. ^ Ma, Jian Feng; Ryan, P. R.; Delhaize, E. (2001). "Aluminium tolerance in plants and the complexing role of organic acids". Trends in Plant Science. 6 (6): 273-278. doi:10.1016/S1360-1385(01)01961-6. PMID 11378470. 
  160. ^ Magalhaes, J. V.; Garvin, D. F.; Wang, Y.; Sorrells, M. E.; Klein, P. E.; Schaffert, R. E.; Li, L.; Kochian, L. V. (2004). "Comparative Mapping of a Major Aluminum Tolerance Gene in Sorghum and Other Species in the Poaceae". Genetics. 167 (4): 1905-14. doi:10.1534/genetics.103.023580. PMC 1471010Freely accessible. PMID 15342528. 
  161. ^ "Fungus 'eats' CDs". BBC. 22 June 2001. Archived from the original on 12 December 2013. 
  162. ^ Bosch, Xavier (27 June 2001). "Fungus eats CD". Nature. doi:10.1038/news010628-11 (inactive 2018-09-14). Archived from the original on 31 December 2010. 
  163. ^ Sheridan, J. E.; Nelson, Jan; Tan, Y. L. "Studies on the 'Kerosene Fungus' Cladosporium resinae (Lindau) De Vries: Part I. The Problem of Microbial Contamination of Aviation Fuels". Tuatara. 19 (1): 29. Archived from the original on 13 December 2013. 
  164. ^ "Fuel System Contamination & Starvation". Duncan Aviation. 2011. Archived from the original on 25 February 2015. 

Bibliography

Further reading

  • Mimi Sheller, Aluminum Dream: The Making of Light Modernity. Cambridge, MA: Massachusetts Institute of Technology Press, 2014.

External links


  This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.

Aluminium
 



 



 
Music Scenes